Genuine Polaris Dowel Pin M6 X 10 — OEM Part #5142521
Skip the hardware-store guesswork. The genuine Polaris Dowel Pin M6 X 10 matches the thread pitch, length, strength grade and head style of the original, so it fits your Polaris ATV or side-by-side the first time and holds under vibration.
OEM hardware is engineered for a specific location and load. The wrong grade, length or thread can strip threads, loosen under vibration or let critical parts shift. This part is confirmed for 35 Polaris models from 2021. See the full fitment list below.
Dowel Pin M6 X 10 at a Glance
-
OEM part number: 5142521
-
Brand: Polaris (genuine factory part)
-
Part type: Crankcase & Components
-
Fits: General crossover side-by-side and Ranger utility side-by-side models, 2021
-
Condition: New
Polaris Models and Years This Dowel Pin M6 X 10 Fits
Genuine Polaris part #5142521 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Polaris General crossover side-by-side Fitment
| Model |
Model Years |
| Polaris General 4 1000 Deluxe Ride Command |
2021 |
| Polaris General 4 1000 Premium |
2021 |
| Polaris General 4 1000 Ride Command |
2021 |
| Polaris General 1000 Deluxe |
2021 |
| Polaris General 1000 Deluxe Abs Zug Lof |
2021 |
| Polaris General 1000 Deluxe EPS (International) |
2021 |
| Polaris General 1000 Deluxe Ride Command |
2021 |
| Polaris General 1000 Premium |
2021 |
| Polaris General 1000 Sport |
2021 |
| Polaris General XP 4 1000 Deluxe |
2021 |
| Polaris General XP 4 1000 Deluxe Ride Command |
2021 |
| Polaris General XP 4 1000 Hunter |
2021 |
| Polaris General XP 1000 Deluxe |
2021 |
| Polaris General XP 1000 Deluxe Ride Command |
2021 |
| Polaris General XP 1000 Hunter |
2021 |
Polaris Ranger utility side-by-side Fitment
| Model |
Model Years |
| Polaris Ranger 1000 EPS |
2021 |
| Polaris Ranger 1000 Ps Full Size |
2021 |
| Polaris Ranger Crew 1000 Premium |
2021 |
| Polaris Ranger Crew 1000 Ps Evap |
2021 |
| Polaris Ranger Crew 1000 Ps Wp Evap |
2021 |
| Polaris Ranger Crew XP 1000 EPS |
2021 |
| Polaris Ranger Crew XP 1000 Northstar |
2021 |
| Polaris Ranger Crew XP 1000 Northstar Edition Trail Boss |
2021 |
| Polaris Ranger Crew XP 1000 Northstar Premium |
2021 |
| Polaris Ranger Crew XP 1000 Northstar Premium Audio |
2021 |
| Polaris Ranger Crew XP 1000 Northstar Trail Boss Evap |
2021 |
| Polaris Ranger Crew XP 1000 Northstar Ultimate |
2021 |
| Polaris Ranger Crew XP 1000 Ps Tx Ca |
2021 |
| Polaris Ranger XP 1000 EPS Eu |
2021 |
| Polaris Ranger XP 1000 EPS Is (International) |
2021 |
| Polaris Ranger XP 1000 Northstar Edition |
2021 |
| Polaris Ranger XP 1000 Northstar Premium |
2021 |
| Polaris Ranger XP 1000 Ps Northstar |
2021 |
| Polaris Ranger XP 1000 Texas Edition |
2021 |
| Polaris Ranger XP 1000 Trail Boss |
2021 |
Why Choose a Genuine Polaris OEM Dowel Pin M6 X 10?
- Exact factory size, thread pitch and length
- Correct strength grade for its location
- Factory corrosion-resistant finish
- No guessing at sizes or grades
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Polaris model we support
Features and Materials
Key Features
- Genuine Polaris OEM hardware, part #5142521
- Matches the original thread, length, head style and grade
- Plated or coated to resist corrosion (where applicable)
- Used across several Polaris assemblies, as listed in the fitment table
- Ideal for replacing lost, stripped or one-time-use fasteners
Materials and Construction
Polaris fasteners are heat-treated alloy or carbon steel, or stainless steel where corrosion resistance matters most, with zinc or similar plating. Washers, clips and bushings are steel, spring steel, nylon or rubber depending on the job.
Common Reasons Riders Replace This Part
- Replacing hardware lost on the trail
- Replacing stretched, rusted or stripped fasteners
- Rebuilds that call for new one-time-use hardware
- Keeping spares for common repairs
Signs Your Dowel Pin M6 X 10 Needs Replacing
- Rounded heads or damaged threads
- Rust that weakens the fastener
- Missing hardware that leaves a part loose
- Bolts that will not hold torque
- Self-locking nuts or one-time bolts that were already reused
Installation Tips
- Check the Polaris parts diagram for the location and quantity you need.
- Clean the threads in the mating part, chasing damaged threads with a tap if needed.
- Apply thread locker or anti-seize only where the service manual specifies.
- Start the fastener by hand to avoid cross-threading.
- Tighten to the factory torque spec with a calibrated torque wrench.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Polaris Parts Diagrams for Your Machine
Find part #5142521 and every part installed with it in the factory Polaris parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Polaris parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Dowel Pin M6 X 10 with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Polaris Dowel Pin M6 X 10?
The genuine Polaris part number is 5142521. Use it to match this part to your factory parts diagram.
Which Polaris models does part #5142521 fit?
It fits 35 Polaris General and Ranger models from 2021 to 2021. The complete list is in the fitment tables above.
Is this a genuine Polaris part?
Yes. This is a genuine Polaris OEM part, the same part number used at the factory, not an aftermarket copy.
Can I use a hardware-store bolt instead?
It may look the same, but grade, pitch, length and finish often differ. For suspension, brakes or engine parts, use the specified OEM fastener.
Is this sold individually?
This listing is for the part number shown. Check the parts diagram for the quantity at each location.
Should I reuse self-locking nuts?
No. Self-locking and torque-to-yield fasteners are designed for one use.
Order Your Genuine Polaris Dowel Pin M6 X 10 Today
Ride with confidence on parts built for your machine. Order the genuine Polaris Dowel Pin M6 X 10, OEM part #5142521, from Witchdoctors today and keep your Polaris ATV or side-by-side running the way Polaris designed it.
Where to Ride Your Polaris
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.