Genuine Polaris Spring Retainer Pin — OEM Part #7663045
Keep your Ranger models working with a genuine Polaris Spring Retainer Pin. This OEM part is built to the original specification, so it works with the factory bed, rack or hitch without guesswork.
Beds, racks, storage bins and hitch parts carry real weight over rough ground. Worn latches, cracked bins and bent brackets make loads unsafe and let water ruin what you carry. This part is confirmed for 28 Polaris models from 2022 to 2026. See the full fitment list below.
Spring Retainer Pin at a Glance
-
OEM part number: 7663045
-
Brand: Polaris (genuine factory part)
-
Part type: Tailgates & Components
-
Fits: Ranger utility side-by-side models, 2022–2026
-
Condition: New
Polaris Models and Years This Spring Retainer Pin Fits
Genuine Polaris part #7663045 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Polaris Ranger utility side-by-side Fitment
| Model |
Model Years |
| Polaris MS Ranger 570 Nordic PRO Tb1 FC (International) |
2026 |
| Polaris Ranger |
2023 |
| Polaris Ranger 530 Israel (International) |
2023–2025 |
| Polaris Ranger 570 |
2022–2023, 2025–2026 |
| Polaris Ranger 570 Crew |
2023–2026 |
| Polaris Ranger 570 Crew EPS |
2026 |
| Polaris Ranger 570 Crew Latin (International) |
2025 |
| Polaris Ranger 570 Crew Non EPS |
2026 |
| Polaris Ranger 570 Crew Northstar |
2023–2026 |
| Polaris Ranger 570 EPS |
2026 |
| Polaris Ranger 570 EPS HD (International) |
2024–2026 |
| Polaris Ranger 570 EPS MD (International) |
2023–2024 |
| Polaris Ranger 570 Intl |
2023, 2026 |
| Polaris Ranger 570 Latin America (International) |
2025 |
| Polaris Ranger 570 Midsize Tractor |
2022 |
| Polaris Ranger 570 Non EPS |
2025–2026 |
| Polaris Ranger 570 Nordic PRO (International) |
2022–2025 |
| Polaris Ranger 570 Northstar |
2022–2026 |
| Polaris Ranger 570 Northstar Edition |
2022 |
| Polaris Ranger 570 Premium |
2023–2025 |
| Polaris Ranger 570 RC |
2022 |
| Polaris Ranger 570 Ride Command |
2022 |
| Polaris Ranger Crew 570 |
2022–2023 |
| Polaris Ranger Crew 570 Northstar |
2022 |
| Polaris Ranger Crew 570 Northstar Edition |
2022 |
| Polaris Ranger Crew 570 RC |
2022 |
| Polaris Ranger MS 570 (International) |
2025–2026 |
| Polaris Ranger MS 570 EPS (International) |
2025 |
Why Choose a Genuine Polaris OEM Spring Retainer Pin?
- Factory fit with the original bed, rack, box or frame
- Restores secure latching and load retention
- Keeps stored gear protected from water and dust
- Built for the rated cargo and towing use of the listed models
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Polaris model we support
Features and Materials
Key Features
- Genuine Polaris OEM part, part #7663045
- Original mounting points and hardware
- Made for the vibration and loads of work and trail use
- Corrosion-resistant finish or UV-stable plastic, depending on the part
- Works with factory latches, struts and Lock & Ride accessories where equipped
Materials and Construction
Polaris cargo and storage parts use high-strength steel for load-bearing brackets, racks and hitch parts, and impact-resistant, UV-stabilized plastics for boxes, bins and lids. Rubber seals help keep moisture out.
Common Reasons Riders Replace This Part
- Hauling tools, feed, firewood and equipment
- Towing within the rated limits for your model
- Keeping gear dry in factory storage
- Repairing a bed, tailgate or box after damage
Signs Your Spring Retainer Pin Needs Replacing
- Tailgates or lids that will not stay latched
- Cracked bins, boxes or bed panels
- Bent or broken rack and hitch brackets
- Torn or missing seals that let water in
- Dump-bed latches or struts that no longer hold
Installation Tips
- Empty the bed or compartment and support lids or beds before removing parts.
- Use the Polaris parts diagram to identify fasteners and linkage.
- Remove the worn part and inspect nearby hinges, latches and brackets.
- Install with hardware finger-tight, check alignment, then torque to spec.
- Test latches, hinges and load security before carrying a full load.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Polaris Parts Diagrams for Your Machine
Find part #7663045 and every part installed with it in the factory Polaris parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Polaris parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Spring Retainer Pin with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Polaris Spring Retainer Pin?
The genuine Polaris part number is 7663045. Use it to match this part to your factory parts diagram.
Which Polaris models does part #7663045 fit?
It fits 28 Polaris Ranger models from 2022 to 2026. The complete list is in the fitment tables above.
Is this a genuine Polaris part?
Yes. This is a genuine Polaris OEM part, the same part number used at the factory, not an aftermarket copy.
Does this change my cargo or towing capacity?
No. Capacities are set by the manufacturer for your model. This part restores factory function only.
Will it fit aftermarket racks or accessories?
It is designed for the factory Polaris setup on the listed models. Aftermarket accessories may need their own hardware.
Should I replace the latch hardware too?
If the latch, striker or hinge is worn, replace it at the same time so the new part closes and holds properly.
Order Your Genuine Polaris Spring Retainer Pin Today
Ride with confidence on parts built for your machine. Order the genuine Polaris Spring Retainer Pin, OEM part #7663045, from Witchdoctors today and keep your Ranger models running the way Polaris designed it.
Where to Ride Your Polaris
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.