Genuine Polaris Snap Pin — OEM Part #3088229
When you are inside the engine, there is no room for guesswork. The genuine Polaris Snap Pin is built to the exact tolerances of the original part in your Polaris ATV or side-by-side, so it fits the mating parts correctly and keeps the engine running the way it was designed.
Engine internals and castings work under heat, pressure and constant vibration. A part that is even slightly off can cause oil leaks, low compression, noise or major engine damage. This part is confirmed for 3 Polaris models from 2003 to 2006. See the full fitment list below.
Snap Pin at a Glance
-
OEM part number: 3088229
-
Brand: Polaris (genuine factory part)
-
Part type: Engine Governor & Components
-
Fits: Ranger utility side-by-side and Series 10/11 ATV models, 2003–2006
-
Condition: New
Polaris Models and Years This Snap Pin Fits
Genuine Polaris part #3088229 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Polaris Ranger utility side-by-side Fitment
| Model |
Model Years |
| Polaris Ranger 500 Tm 2x4 |
2006 |
| Polaris Ranger Tm |
2004–2006 |
Polaris Series 10/11 ATV Fitment
| Model |
Model Years |
| Polaris Series 11 UTV 2x4 |
2003 |
Why Choose a Genuine Polaris OEM Snap Pin?
- Factory tolerances for correct clearances and fit
- Designed to work with the other OEM parts in the engine
- Helps protect any applicable factory warranty coverage
- Lowers the risk of a repeat teardown from a poor-fitting part
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Polaris model we support
Features and Materials
Key Features
- Genuine Polaris OEM engine part, part #3088229
- Machined to Polaris's original specifications
- Matches factory sealing surfaces and mounting points
- Made for the heat and loads of the listed engines
- Pairs with the gaskets and seals on the same parts diagram
Materials and Construction
Polaris engine parts use materials chosen for their location: aluminum alloy castings for cases, cylinders and covers; hardened, heat-treated steel for shafts, gears and valvetrain parts; and multi-layer or composite gaskets with elastomer oil seals.
Common Reasons Riders Replace This Part
- Full or partial engine rebuilds
- Repairs after overheating or oil starvation
- Fixing oil leaks at cases, covers and seals
- Restoring compression and power on a high-hour engine
Signs Your Snap Pin Needs Replacing
- Oil leaks around covers, cases or seals
- Ticking, knocking or rattling from the engine
- Low compression or noticeable power loss
- Blue or white smoke, or high oil use
- Metal debris in the oil or on the drain plug magnet
Installation Tips
- Follow the Polaris service manual for your model; engine work needs exact procedures and torque specs.
- Clean all mating surfaces and replace any gaskets and seals you disturb.
- Measure critical clearances with proper tools before final assembly.
- Lubricate moving parts with clean engine oil or assembly lube as specified.
- Torque fasteners in sequence, refill fluids and check for leaks.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Related OEM Parts for the Same Machines
Doing the job right? These genuine Polaris parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Snap Pin with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Polaris Snap Pin?
The genuine Polaris part number is 3088229. Use it to match this part to your factory parts diagram.
Which Polaris models does part #3088229 fit?
It fits the Ranger 500 Tm 2x4 (2006); Ranger Tm (2004–2006); Series 11 UTV 2x4 (2003).
Is this a genuine Polaris part?
Yes. This is a genuine Polaris OEM part, the same part number used at the factory, not an aftermarket copy.
Should I replace gaskets and seals at the same time?
Yes. Replace any gasket or seal you disturb. They are on the same Polaris parts diagram.
Is OEM worth it over aftermarket engine parts?
For internals, OEM parts match the exact clearances the engine was designed around, which helps avoid noise, wear and leaks.
Can I do this repair myself?
Experienced home mechanics can do many engine repairs with the service manual and the right tools. Precision internal work is best left to a qualified technician if you are not set up for it.
Order Your Genuine Polaris Snap Pin Today
Get your Polaris ATV or side-by-side back to factory condition. Add the genuine Polaris Snap Pin (part #3088229) to your cart today, and order the related parts above at the same time so you can finish the job in one go.
Where to Ride Your Polaris
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.