Genuine Yamaha Pipe — OEM Part #24W-14193-00-00
Hard starts, stalling and hesitation often trace back to the fuel system. The genuine Yamaha Pipe restores factory fuel delivery on your Yamaha ATV or side-by-side, connecting to the original lines, fittings and wiring so it works with the factory fuel injection or carburetor setup.
Tanks, pumps, injectors, carburetors, lines and emissions parts must deliver clean fuel at the right pressure and keep vapors sealed. A small leak or weak part affects starting, power and safety. This part is confirmed for 63 Yamaha models from 2004 to 2014. See the full fitment list below.
Pipe at a Glance
-
OEM part number: 24W-14193-00-00
-
Brand: Yamaha (genuine factory part)
-
Part type: Carburetors & Components
-
Fits: Big Bear utility ATV, Grizzly utility ATV, Raptor sport ATV, Rhino side-by-side, Wolverine recreation side-by-side and YFZ sport ATV models, 2004–2014
-
Condition: New
Yamaha Models and Years This Pipe Fits
Genuine Yamaha part #24W-14193-00-00 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
This part is shared across 63 Yamaha model variants, so the table below groups them by model family. Your exact trim is listed in the parts diagrams linked further down.
Yamaha Big Bear utility ATV Fitment
| Model Family |
Model Years |
Trims |
| Yamaha Big Bear 4WD |
2012 |
1 |
| Yamaha Big Bear 250 |
2008–2009 |
1 |
| Yamaha Big Bear 400 |
2008–2012 |
2 |
Yamaha Grizzly utility ATV Fitment
| Model Family |
Model Years |
Trims |
| Yamaha Grizzly 80 |
2008 |
2 |
| Yamaha Grizzly 125 |
2008–2013 |
2 |
| Yamaha Grizzly 350 |
2008–2014 |
7 |
| Yamaha Grizzly 400 |
2008 |
2 |
| Yamaha Grizzly 450 |
2008–2014 |
9 |
| Yamaha Grizzly 660 |
2008 |
2 |
Yamaha Raptor sport ATV Fitment
| Model Family |
Model Years |
Trims |
| Yamaha Raptor 50 |
2008 |
1 |
| Yamaha Raptor 80 |
2008 |
1 |
| Yamaha Raptor 125 |
2011–2013 |
1 |
| Yamaha Raptor 250 |
2008–2013 |
2 |
| Yamaha Raptor 350 |
2008–2013 |
1 |
Yamaha Rhino side-by-side Fitment
| Model Family |
Model Years |
Trims |
| Yamaha Rhino |
2004–2005 |
3 |
| Yamaha Rhino 450 |
2006–2009 |
7 |
| Yamaha Rhino 660 |
2004, 2006–2007 |
12 |
| Yamaha Rhino 660F |
2004–2007 |
1 |
Yamaha Wolverine recreation side-by-side Fitment
| Model Family |
Model Years |
Trims |
| Yamaha Wolverine |
2008–2010 |
4 |
Yamaha YFZ sport ATV Fitment
| Model Family |
Model Years |
Trims |
| Yamaha YFZ450 |
2008–2009, 2012–2013 |
2 |
Why Choose a Genuine Yamaha OEM Pipe?
- Correct fit with factory fittings and connectors
- Maintains the fuel delivery your engine is calibrated for
- Fuel- and ethanol-resistant materials
- Helps keep emissions and vapor systems compliant
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Yamaha model we support
Features and Materials
Key Features
- Genuine Yamaha OEM fuel part, part #24W-14193-00-00
- Original line sizes, connectors, jets and mounting
- Built for gasoline and ethanol-blend exposure
- Designed for the listed Yamaha models
- Works with factory fuel injection, carburetor and EVAP systems
Materials and Construction
Yamaha fuel parts use ethanol-resistant hose and seals, polyethylene or steel tanks, corrosion-resistant pump, injector and carburetor parts, and fittings that seal under vibration.
Common Reasons Riders Replace This Part
- Fixing hard starting, stalling or hesitation
- Repairing fuel leaks or fuel smell
- Replacing parts damaged by stale or bad fuel
- Restoring emissions and EVAP parts
Signs Your Pipe Needs Replacing
- Hard starting or long cranking
- Stalling, surging or hesitation under load
- Fuel smell or visible leaks
- Check engine light tied to fuel or EVAP (fuel-injected models)
- Cracked lines, fittings or tank parts
Installation Tips
- Work in a ventilated area away from sparks and relieve fuel pressure first on fuel-injected models.
- Disconnect the battery before working on pumps or wiring.
- Use the Yamaha parts diagram to confirm routing, clamps and O-rings.
- Install with fresh seals and secure every clamp and connector.
- Check for leaks before starting the engine.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Related OEM Parts for the Same Machines
Doing the job right? These genuine Yamaha parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Pipe with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Yamaha Pipe?
The genuine Yamaha part number is 24W-14193-00-00. Use it to match this part to your factory parts diagram.
Which Yamaha models does part #24W-14193-00-00 fit?
It fits 63 Yamaha Big Bear, Grizzly, Raptor, Rhino, Wolverine and YFZ models from 2004 to 2014. The complete list is in the fitment tables above.
Is this a genuine Yamaha part?
Yes. This is a genuine Yamaha OEM part, the same part number used at the factory, not an aftermarket copy.
Can ethanol fuel damage my fuel system?
Ethanol blends attract moisture and can degrade older parts, especially carburetors. Follow your owner's manual for recommended fuel.
Should I replace the fuel filter too?
If your model has a serviceable filter, replacing it during fuel work is a good idea.
Why does it run poorly after sitting?
Stale fuel can varnish carburetor jets, injectors and pumps. Use stabilizer for storage and drain old fuel.
Order Your Genuine Yamaha Pipe Today
Get your Yamaha ATV or side-by-side back to factory condition. Add the genuine Yamaha Pipe (part #24W-14193-00-00) to your cart today, and order the related parts above at the same time so you can finish the job in one go.
Where to Ride Your Yamaha
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.