Genuine Can-Am Piston Pin 20/12.1/51 — OEM Part #420216281
When you are inside the engine, there is no room for guesswork. The genuine Can-Am Piston Pin 20/12.1/51 is built to the exact tolerances of the original part in your Can-Am ATV or side-by-side, so it fits the mating parts correctly and keeps the Rotax engine running the way BRP designed it.
Engine internals and castings work under heat, pressure and constant vibration. A part that is even slightly off can cause oil leaks, low compression, noise or major engine damage. This part is confirmed for 135 Can-Am models from 2022 to 2026. See the full fitment list below.
Piston Pin 20/12.1/51 at a Glance
-
OEM part number: 420216281
-
Brand: Can-Am by BRP (genuine factory part)
-
Part type: Pistons & Components
-
Fits: Commander crossover side-by-side, Defender utility side-by-side, Maverick sport side-by-side, Outlander ATV and Traxter utility side-by-side models, 2022–2026
-
Condition: New
Can-Am Models and Years This Piston Pin 20/12.1/51 Fits
Genuine Can-Am part #420216281 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
This part is shared across 135 Can-Am model variants, so the table below groups them by model family. Your exact trim is listed in the parts diagrams linked further down.
Can-Am Commander crossover side-by-side Fitment
| Model Family |
Model Years |
Trims |
| Can-Am Commander 700 |
2022–2026 |
8 |
Can-Am Defender utility side-by-side Fitment
| Model Family |
Model Years |
Trims |
| Can-Am Defender HD7 |
2022–2026 |
5 |
Can-Am Maverick sport side-by-side Fitment
| Model Family |
Model Years |
Trims |
| Can-Am Maverick Trail |
2022–2023, 2025–2026 |
5 |
Can-Am Outlander ATV Fitment
| Model Family |
Model Years |
Trims |
| Can-Am Outlander 2x4 |
2025–2026 |
1 |
| Can-Am Outlander 4x4 |
2025–2026 |
32 |
| Can-Am Outlander 6x6 |
2026 |
6 |
| Can-Am Outlander 500 |
2023–2026 |
5 |
| Can-Am Outlander 700 |
2023–2026 |
9 |
| Can-Am Outlander 850 |
2025–2026 |
7 |
| Can-Am Outlander 1000R |
2025–2026 |
11 |
| Can-Am Outlander DPS |
2023 |
6 |
| Can-Am Outlander PRO |
2023–2026 |
31 |
| Can-Am Outlander X |
2023 |
1 |
| Can-Am Outlander XT |
2023 |
2 |
Can-Am Traxter utility side-by-side Fitment
| Model Family |
Model Years |
Trims |
| Can-Am Traxter HD7 |
2023–2026 |
4 |
| Can-Am Traxter T |
2022 |
2 |
Why Choose a Genuine Can-Am OEM Piston Pin 20/12.1/51?
- Factory tolerances for correct clearances and fit
- Designed to work with the other OEM parts in the Rotax engine
- Helps protect any applicable BRP warranty coverage
- Lowers the risk of a repeat teardown from a poor-fitting part
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Can-Am model we support
Features and Materials
Key Features
- Genuine Can-Am OEM engine part, part #420216281
- Machined to BRP's original specifications
- Matches factory sealing surfaces and mounting points
- Made for the heat and loads of the listed engines
- Pairs with the gaskets and seals on the same parts diagram
Materials and Construction
Rotax engine parts use materials chosen for their location: aluminum alloy castings for cases, cylinders and covers; hardened, heat-treated steel for shafts, gears and valvetrain parts; and multi-layer or composite gaskets with elastomer oil seals.
Common Reasons Riders Replace This Part
- Full or partial engine rebuilds
- Repairs after overheating or oil starvation
- Fixing oil leaks at cases, covers and seals
- Restoring compression and power on a high-hour engine
Signs Your Piston Pin 20/12.1/51 Needs Replacing
- Oil leaks around covers, cases or seals
- Ticking, knocking or rattling from the engine
- Low compression or noticeable power loss
- Blue or white smoke, or high oil use
- Metal debris in the oil or on the drain plug magnet
Installation Tips
- Follow the BRP service manual for your model; engine work needs exact procedures and torque specs.
- Clean all mating surfaces and replace any gaskets and seals you disturb.
- Measure critical clearances with proper tools before final assembly.
- Lubricate moving parts with clean engine oil or assembly lube as specified.
- Torque fasteners in sequence, refill fluids and check for leaks.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Can-Am Parts Diagrams for Your Machine
Find part #420216281 and every part installed with it in the factory Can-Am parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Can-Am parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Piston Pin 20/12.1/51 with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Can-Am Piston Pin 20/12.1/51?
The genuine Can-Am part number is 420216281. Use it to match this part to your factory parts diagram.
Which Can-Am models does part #420216281 fit?
It fits 135 Can-Am Commander, Defender, Maverick, Outlander and Traxter models from 2022 to 2026. The complete list is in the fitment tables above.
Is this a genuine Can-Am part?
Yes. This is a genuine Can-Am OEM part from BRP, the same part number used at the factory, not an aftermarket copy.
Should I replace gaskets and seals at the same time?
Yes. Replace any gasket or seal you disturb. They are on the same Can-Am parts diagram.
Is OEM worth it over aftermarket engine parts?
For internals, OEM parts match the exact clearances the Rotax engine was designed around, which helps avoid noise, wear and leaks.
Can I do this repair myself?
Experienced home mechanics can do many engine repairs with the service manual and the right tools. Precision internal work is best left to a qualified technician if you are not set up for it.
Order Your Genuine Can-Am Piston Pin 20/12.1/51 Today
Get your Can-Am ATV or side-by-side back to factory condition. Add the genuine Can-Am Piston Pin 20/12.1/51 (part #420216281) to your cart today, and order the related parts above at the same time so you can finish the job in one go.
Where to Ride Your Can-Am
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.