Every great setup starts with the right foundation. The RAM® Pitch Male Thread with 1" Ball (RAM-B-349U) is a 1" B-size ball with a threaded stud, hex or bolt-hole base that turns an existing hole or bolt into a RAM mounting point. Whether you are logging highway miles or crawling a rocky trail, it keeps your gear exactly where you set it.
At Witchdoctors we stock genuine RAM Mounts parts with the same part numbers RAM uses, so you can build a new setup, replace a worn piece or expand the system you already own with confidence.
Why Choose the RAM® Pitch Male Thread with 1" Ball
Bolt-on ball bases are how custom builders add a RAM mount exactly where they want it: a mirror hole, a fairing bolt, an accessory plate or a drilled bracket. They are compact, clean and nearly invisible once installed.
Key Features and Benefits
- Threads or bolts into an existing hole or stud
- 1" B-size rubber ball connects to RAM arms
- Compact footprint for clean custom installs
- Corrosion-resistant construction
- Great for mirror mounts, fairings, dashes and accessory plates
Specifications
-
Brand: RAM Mounts
-
Part number: RAM-B-349U
-
Product type: threaded / bolt-on ball base
-
Ball size: B size (1" diameter rubber ball)
-
Warranty: RAM limited lifetime warranty on the mount and components (devices are not covered)
-
Origin: listed as Made in the USA
From the Manufacturer
- Compatibility: Threaded hole must contain the following dimensions for this base to fit: M10 1.25 pitch with a 14.5mm flange diameter with a 10.15mm thread length
How the RAM Ball-and-Socket System Works
Every RAM mount is built from three interchangeable parts: a base that attaches to your vehicle, a double socket arm, and a holder or accessory for your device. Each base and holder ends in a rubber ball, and the arm’s sockets clamp around those balls when you turn the center knob. The rubber gives the joint grip, lets you set almost any angle, and helps soak up shock and vibration.
Parts only connect within the same ball size, so it pays to know the system:
-
A size: 0.75" ball for lightweight devices
-
B size: 1" ball, the most popular size for phones, GPS units, cameras and cup holders
-
C size: 1.5" ball for tablets and heavier equipment
-
D size: 2.25" ball for laptops and heavy-duty loads
This part uses the B-size 1" ball, so it works with all RAM B-size bases, arms and holders.
Materials and Build Quality
RAM builds its mounts from high-strength composite, powder-coated marine-grade aluminum and stainless steel hardware, depending on the part. Composite parts (usually marked with a RAP prefix) are light, strong and rust-proof. Aluminum parts are powder-coated to resist corrosion. Stainless hardware won’t rust in rain, mud, road salt or salt spray, so the mount keeps working season after season.
Fitment and Compatibility
The RAM® Pitch Male Thread with 1" Ball is a universal-fit RAM part. It isn’t tied to a model year. Fit depends on the mounting point, such as bar or tube diameter, reservoir screw spacing, thread size or surface type, and for holders on the size of your device.
- Motorcycles, including cruisers, baggers, touring, sport and adventure bikes, with Indian and Victory motorcycles specifically tagged for fit on our site
- ATVs, UTVs and side-by-sides from Arctic Cat, Can Am, CFMOTO, Honda, John Deere, Kawasaki, Polaris, Yamaha
- Boats, trucks, tractors, mowers and equipment wherever the base can attach
Model years: all years, provided the mounting point matches the specifications above. Not sure of your bar size? Use our Roll Cage / Handlebar Measurement Guide before you order.
Installation
- Confirm thread size or hole diameter matches the base.
- Install the base and snug it down with the correct tool.
- Use thread locker where vibration is high.
- Attach a RAM arm and holder.
Most installs take under 15 minutes with basic hand tools. Recheck knob tension and fasteners after your first ride.
Where the RAM® Pitch Male Thread with 1" Ball Works Best
- Turn-by-turn navigation on cross-country tours and weekend rides
- Music, intercom and ride-tracking apps within easy reach
- Commuting with your phone visible and secure
- Trail maps and GPS tracks on ATV and UTV rides
- Ride-tracking, comms and camera apps on group trail days
- Work use on farm, ranch and job-site machines
Care and Maintenance
- Clean with mild soap and water. Avoid harsh solvents that can dry out the rubber balls.
- Check knob tension and base fasteners periodically, especially on off-road machines.
- Replace worn X-Grip post caps or tethers to keep full grip.
- Inspect rubber balls for cracking after long sun exposure, and replace the part if needed.
Complete Your RAM Setup
Build out or upgrade your mount with these compatible RAM parts:
Browse the full range in our RAM Phone and Device Mounts collection or our Victory and Indian phone and drink mounts.
Helpful Guides From the Witchdoctors Blog
Frequently Asked Questions
Which thread do I need?
Match the thread to the hole or stud on your vehicle. Common examples are M10 mirror threads, M6 hardware and 1/4"-20 camera threads.
Can I use thread locker?
Medium-strength thread locker is recommended on high-vibration machines.
Is it waterproof?
RAM mounts are built for all-weather use and the hardware resists corrosion. Unless a holder is specifically rated waterproof, your device still needs its own protection from rain and dust.
Will it damage my handlebars or paint?
Rubber-padded contact points and correct hardware torque prevent damage. Do not over-tighten clamps on chrome or painted parts.
What warranty does RAM offer?
RAM Mounts backs its mounts and components with a limited lifetime warranty. Mounted devices are not covered.
Is the RAM® Pitch Male Thread with 1" Ball compatible with my other RAM parts?
Yes. It uses RAM’s 1" B-size ball, so it works with any RAM B-size arm, base or holder.
Where to Ride
Put your new RAM mount to work on one of these rides:
Order Your RAM® Pitch Male Thread with 1" Ball Today
Stop juggling your phone and gear and mount it the way the pros do. Add the RAM® Pitch Male Thread with 1" Ball (RAM-B-349U) to your cart today. Witchdoctors ships genuine RAM Mounts parts fast, and our team of riders is ready to help you build the right setup. Questions about fitment? Contact us and we’ll help you choose.
General Safety Warning & Installation Requirements
Your safety is our top priority. Whether you are maintaining a Victory® or Indian® Motorcycle,
or servicing a UTV, ATV, or Side-by-Side, proper installation is vital to the performance and safety
of your vehicle.
Important:
⚠️
Warning: Failure to follow manufacturer-specified installation procedures and
safety requirements can result in mechanical failure, loss of vehicle control, serious injury, or death.
Important Fitment Disclosure
At Witchdoctors, we want to ensure you get back on the road or trail as quickly as possible. Correct fitment
is the most critical step in purchasing parts for your Victory® or Indian® Motorcycle. Also for your
Polaris®, CFMoto®, Arctic Cat®, Yamaha®, Honda®, Can-Am®, Kawasaki® UTV and ATV.
⚠️
Verification Required: While we strive for 100% accuracy, vehicle manufacturers often
make mid-year production changes. Always verify your specific year, make, and model before finalizing
your order.
Read More
Shipping
Qualifying Retail orders $159.99 or more will receive free ground shipping. Free Shipping Terms and conditions.
All orders over $500 will require a signature.
Please see International Shipping page for orders shipping outside the US.
See our full Shipping Policy page for further details.
Product Availability
We show real time product availability. These products normally ship the same business day but may ship from one of our warehouses across the country. If an item requires additional processing time you will be notified.
Returns
If your order arrives and it is not right, we will we'll fix it. We promise!
Doesn't fit or just not happy with it? You can return any new, unopened, unused or unaltered item within 30 days of delivery receipt of your item. We will issue a refund to your original payment method.
See our full Return Policy for all of the pertinent details.
COLOR Black FINISH Powder-Coated MADE IN THE U.S.A. Yes MATERIAL Aluminum MODEL Ram Mounting System PACKAGING Each SPECIFIC APPLICATION No STYLE Ball Mount,Custom Replacement TYPE Mounting Accessory