Genuine Yamaha Pitman Pin — OEM Part #J38-23836-00-00
Loose, heavy or wandering steering makes every ride tiring and less safe. The genuine Yamaha Pitman Pin restores precise, factory-feel steering on your Pro Hauler 1000, fitting the original column, rack and linkage.
The steering wheel or handlebar, column, rack, tie rods and EPS unit all affect control. Play or binding in any one part shows up as vague or heavy steering. This part is confirmed for 1 Yamaha model from 2004 to 2005. See the full fitment list below.
Pitman Pin at a Glance
-
OEM part number: J38-23836-00-00
-
Brand: Yamaha (genuine factory part)
-
Part type: Steering Column
-
Fits: Pro Hauler utility side-by-side models, 2004–2005
-
Condition: New
Yamaha Models and Years This Pitman Pin Fits
Genuine Yamaha part #J38-23836-00-00 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Yamaha Pro Hauler utility side-by-side Fitment
| Model |
Model Years |
| Yamaha Pro Hauler 1000 |
2004–2005 |
Why Choose a Genuine Yamaha OEM Pitman Pin?
- Factory fit with the rack, column and linkage
- Restores tight, precise steering
- Works with Yamaha EPS where equipped
- Helps keep alignment and tire wear in check
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Yamaha model we support
Features and Materials
Key Features
- Genuine Yamaha OEM steering part, part #J38-23836-00-00
- Original splines, threads and joints
- Corrosion- and impact-resistant construction
- Designed for the listed Yamaha models
- Works with factory EPS units, sensors and wiring where applicable
Materials and Construction
Yamaha steering parts use hardened steel shafts, racks and tie-rod ends with sealed joints, aluminum or steel housings, and sealed EPS motors and modules built for water and vibration.
Common Reasons Riders Replace This Part
- Fixing play, clunks or wandering
- Replacing bent tie rods or shafts after an impact
- Repairing EPS faults or heavy steering
- Restoring steering on a high-hour machine
Signs Your Pitman Pin Needs Replacing
- Free play in the steering
- Clunking when turning
- Heavy steering or an EPS warning
- Bent tie rods or an off-center wheel or handlebar
- Torn boots on tie-rod ends or the rack
Installation Tips
- Point the wheels straight before disconnecting parts.
- Use the Yamaha parts diagram for hardware, cotter pins and EPS connectors.
- Disconnect the battery before working on EPS parts.
- Match the original spline position or tie-rod length.
- Torque to spec, set toe and check lock-to-lock travel.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Related OEM Parts for the Same Machines
Doing the job right? These genuine Yamaha parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Pitman Pin with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Yamaha Pitman Pin?
The genuine Yamaha part number is J38-23836-00-00. Use it to match this part to your factory parts diagram.
Which Yamaha models does part #J38-23836-00-00 fit?
It fits the Pro Hauler 1000 (2004–2005).
Is this a genuine Yamaha part?
Yes. This is a genuine Yamaha OEM part, the same part number used at the factory, not an aftermarket copy.
Do I need an alignment after steering work?
Yes. Set toe to prevent wander and tire wear.
Does EPS need a reset after service?
Some systems need a reset or calibration. Check your service manual or ask a dealer.
Can a bent steering part be straightened?
No. Always replace bent steering parts.
Order Your Genuine Yamaha Pitman Pin Today
Get your Pro Hauler 1000 back to factory condition. Add the genuine Yamaha Pitman Pin (part #J38-23836-00-00) to your cart today, and order the related parts above at the same time so you can finish the job in one go.
Where to Ride Your Yamaha
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.