Plate Washer by Yamaha

Yamaha UTV/ATV & Side by Side Hardware - Available at buywitchdoctors.com

Product Specifications: Genuine OEM Yamaha Plate Washer, Part # 92907-08600-00.

Keep your machine running like new with genuine Yamaha Hardware paired with premium maintenance parts from buywitchdoctors.com. Hardware, such as bolts, screws, nuts, washers, clips, clamps, and fasteners, holds your machine together, keeping body panels, brackets, suspension parts, and drivetrain components firmly in place under constant vibration and shock. Because these small parts are easy to overlook but are used in every corner of the machine, the right fastener in good condition is what keeps everything tight, quiet, and safe. Riders most often replace hardware after stripped or rounded heads, stretched or damaged threads, rust and corrosion, bolts that keep working loose, missing pieces lost on the trail, cracked or crushed clips and grommets, or any time a part is removed and the original fasteners are worn, bent, or single-use.

Why Choose Genuine OEM Yamaha Parts?

Choosing original equipment manufacturer (OEM) parts ensures your vehicle maintains its factory-standard performance, reliability, and fuel efficiency. Genuine parts eliminate the guesswork of aftermarket alternatives, offering a seamless integration with your engine's configuration.

• Exact-Fit Design: Matched to Yamaha's original bolt patterns, sealing surfaces, and dimensions for a leak-resistant fit.
• Factory-Spec Quality: Built to the same standards as the parts installed on your machine at the factory.
• Peace of Mind: Skip the trial and error of universal or aftermarket parts that may not seal or align correctly.

Premium Materials & Precision Engineering

Crafted to strict factory tolerances, these components utilize high-grade alloys and chemical-resistant seals. This specialized engineering withstands harsh off-road vibrations, extreme temperatures, and modern fuel additives, preventing premature wear and leaks. Genuine hardware is made from hardened, corrosion-resistant materials with precisely cut threads, correct head styles, and protective finishes matched to each application, so it clamps evenly, resists stretching and loosening, and holds up to repeated removal, vibration, and exposure to mud and water.

Comprehensive Model Fitment (2015-Current)

This genuine OEM part is engineered for a wide range of Yamaha side-by-side (SxS) and all-terrain vehicles (ATV) built from 2015 to the current model year. Please verify your series matches below:

Utility Task Vehicles (UTVs / Side-by-Sides)

• Viking Series: Viking 700 EPS, Viking 700 Ranch Edition, Viking VI EPS
• Wolverine Series: Wolverine R-Spec, Wolverine X2 850, Wolverine X4 850, Wolverine X2 1000, Wolverine RMAX2 1000 (Sport, XT-R, Limited), Wolverine RMAX4 1000
• YXZ Series: YXZ1000R, YXZ1000R SS

All-Terrain Vehicles (ATVs)

• YFZ Series: YFZ50, YFZ450R, YFZ450R SE
• Raptor Series: Raptor 90, Raptor 110, Raptor 700, Raptor 700R, Raptor 700R SE
• Grizzly Series: Grizzly 90, Grizzly 110, Grizzly 700 EPS, Grizzly 700 SE, Grizzly 700 XT-R
• Kodiak Series: Kodiak 450, Kodiak 450 EPS, Kodiak 700, Kodiak 700 EPS, Kodiak 700 SE

⚠️ IMPORTANT DISCLAIMER: Fitment can vary by production date and sub-model trim. Always verify your exact original equipment part number from your vehicle's schematic or consult a certified technician before finalizing your purchase to guarantee flawless compatibility.

Other Popular Parts & Secondary Accessories

• OEM Bearings: Bearings let shafts, wheels, and pivots turn smoothly under load. Replace any bearing that feels rough, loose, or noisy, and use fresh hardware when you reinstall it.
• Bushings: Bushings cushion pivots and mounts and keep parts aligned. Check them for cracks, tears, and play whenever you remove the fasteners that hold them in place.
• Circlips: Circlips, or snap rings, hold shafts, pins, and bearings in position. Replace bent or weakened clips when you reassemble so parts cannot shift or slide out of place.
• Clamps: Clamps secure hoses, lines, and ducts against leaks and vibration. Install fresh clamps with any hose or boot you replace so connections stay tight.
• Grommets: Grommets protect wires and lines where they pass through panels and brackets. Replace dried or split grommets to prevent chafing and keep water and dust out.
• Nuts: Nuts clamp parts together on bolts and studs. Replace rounded, stripped, or rusted nuts, and use the correct type for each location, following your Yamaha service manual.
• O-Rings: O-rings seal fluid and air joints. Replace them any time a joint is opened, since a reused ring can flatten, harden, and leak.
• Screws: Screws hold body panels, covers, and brackets in place. Replace stripped or corroded screws so panels stay secure and do not rattle on rough trails.
• Spacers: Spacers set the correct distance between parts and carry clamping loads. Inspect them for wear, cracks, or deformation whenever you service the surrounding fasteners.
• Washers: Washers spread clamping force and protect surfaces under bolt heads and nuts. Replace flattened, rusted, or missing washers so fasteners stay tight and mounting surfaces stay protected.
• Rivets: Rivets permanently join panels and brackets where bolts are not used. Replace damaged or loose rivets with the correct type so the joint stays solid and rattle-free.
• Zip Ties: Zip ties keep wiring and lines neatly routed and away from heat and moving parts. Replace cut or brittle ties after any repair so everything stays secured on rough terrain.

Frequently Asked Questions (FAQs)

Q: How do I know when my Yamaha hardware needs to be replaced, and how do I confirm the right pieces for my machine?
A: Look for stripped or rounded heads, stretched or damaged threads, heavy rust, bent or crushed pieces, fasteners that keep loosening, and missing items. Before replacing hardware, inspect the threaded holes and mating parts, since damaged threads or worn surfaces can keep new fasteners from holding. Because hardware varies by model, model year, location, and trim, confirm the correct parts, sizes, and tightening procedure using your Yamaha service manual or factory schematic, or contact us with your model and VIN and we will help you match them.

Q: How do mud, water, sand, and heat affect hardware on the trail?
A: Mud, water, and sand can pack into threads and speed up rust and galling, while constant vibration can gradually loosen fasteners and wear at clips, grommets, and bushings. Heat and sun can also harden and crack rubber and plastic pieces. After a wet, muddy, or sandy ride, rinse the machine, dry it, and look for missing, loose, or rusty fasteners. Follow your Yamaha service manual for correct installation and tightening guidance so everything stays secure.

PRO TIP: Learn More about Yamaha OEM vs. Aftermarket Parts

PRO TIP: OEM Hardware Buyer’s Guide for UTVs & ATVs

PRO TIP: The Mechanic's Handbook: A Guide to Popular Fasteners and Tools Used on Motorcycles and UTV's.

PRO TIP: Can You Use Anti-Seize and Blue Loctite on the Same UTV Suspension Bolt?

Are You Looking to Find Great Places & Adventurous Trails to Ride Your UTV, Side by Side or ATV? Check out these highly recommended places:

• Northern Outdoors
• Imperial Sand Dunes
• Johnson Valley OHV Area
• Gypsum City OHV Park
• Leatherwood Off-Road Park