Genuine Polaris "North Star" Logo — OEM Part #7078465
Bring back the factory finish on your Polaris ATV or side-by-side with a genuine Polaris "North Star" Logo. Faded, peeled or torn graphics make a machine look older than it is and can hurt resale value, and this OEM decal matches the original color, shape and placement exactly.
Decals and labels do more than look good. Model graphics identify your machine, and warning labels carry safety and loading information that must stay legible. This part is confirmed for 636 Polaris models from 2003 to 2026. See the full fitment list below.
"North Star" Logo at a Glance
-
OEM part number: 7078465
-
Brand: Polaris (genuine factory part)
-
Part type: OEM Decal
-
Fits: ACE single-seat, ATP ATV, Farmhand utility vehicle, General crossover side-by-side, Hawkeye ATV, Magnum ATV, other Polaris, Outlaw ATV, Phoenix ATV, Predator ATV, RZR sport side-by-side, Ranger utility side-by-side, Sawtooth ATV, Scrambler ATV, Sportsman ATV, Trail Blazer ATV and Trail Boss ATV models, 2003–2026
-
Condition: New
Polaris Models and Years This "North Star" Logo Fits
Genuine Polaris part #7078465 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
This part is shared across 636 Polaris model variants, so the table below groups them by model family. Your exact trim is listed in the parts diagrams linked further down.
Polaris ACE single-seat Fitment
| Model Family |
Model Years |
Trims |
| Polaris ACE |
2016–2021 |
19 |
Polaris ATP ATV Fitment
| Model Family |
Model Years |
Trims |
| Polaris ATP |
2004–2005 |
2 |
Polaris Farmhand utility vehicle Fitment
| Model Family |
Model Years |
Trims |
| Polaris Farmhand |
2017 |
1 |
Polaris General crossover side-by-side Fitment
| Model Family |
Model Years |
Trims |
| Polaris General |
2016–2026 |
49 |
Polaris Hawkeye ATV Fitment
| Model Family |
Model Years |
Trims |
| Polaris Hawkeye |
2006–2013, 2015 |
6 |
Polaris Magnum ATV Fitment
| Model Family |
Model Years |
Trims |
| Polaris Magnum |
2003–2006 |
3 |
Polaris other Polaris Fitment
| Model Family |
Model Years |
Trims |
| Polaris Other |
2015 |
1 |
Polaris Outlaw ATV Fitment
| Model Family |
Model Years |
Trims |
| Polaris Outlaw |
2006–2026 |
14 |
Polaris Phoenix ATV Fitment
| Model Family |
Model Years |
Trims |
| Polaris Phoenix |
2005–2026 |
2 |
Polaris Predator ATV Fitment
| Model Family |
Model Years |
Trims |
| Polaris Predator |
2003–2007 |
4 |
Polaris RZR sport side-by-side Fitment
| Model Family |
Model Years |
Trims |
| Polaris RZR |
2018–2024 |
104 |
Polaris Ranger utility side-by-side Fitment
| Model Family |
Model Years |
Trims |
| Polaris Ranger |
2004–2025 |
201 |
Polaris Sawtooth ATV Fitment
| Model Family |
Model Years |
Trims |
| Polaris Sawtooth |
2006–2007 |
2 |
Polaris Scrambler ATV Fitment
| Model Family |
Model Years |
Trims |
| Polaris Scrambler |
2003–2026 |
25 |
Polaris Sportsman ATV Fitment
| Model Family |
Model Years |
Trims |
| Polaris Sportsman |
2003–2026 |
197 |
Polaris Trail Blazer ATV Fitment
| Model Family |
Model Years |
Trims |
| Polaris Trail Blazer |
2003–2006, 2008–2013 |
4 |
Polaris Trail Boss ATV Fitment
| Model Family |
Model Years |
Trims |
| Polaris Trail Boss |
2003–2013 |
2 |
Why Choose a Genuine Polaris OEM "North Star" Logo?
- Exact factory color match, so it blends with the graphics around it
- Pre-cut to the original outline, with no trimming
- Correct placement for the specific panel it was designed for
- Keeps your machine looking original, which helps at resale or trade-in
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Polaris model we support
Features and Materials
Key Features
- Genuine Polaris OEM graphic, part #7078465
- UV-resistant inks made for outdoor powersports use
- Pressure-sensitive adhesive backing for a clean, bubble-free bond
- Sized and shaped for the original panel location
- Ready to apply. No paint, primer or special tools needed
Materials and Construction
Polaris factory decals use a durable vinyl film with a protective top layer that resists sun fade, fuel splash, pressure washing and trail abrasion. The adhesive is designed to hold on curved plastic panels through heat cycles and vibration.
Common Reasons Riders Replace This Part
- Replacing graphics scratched or peeled by brush and roost
- Refreshing a machine before selling or trading it in
- Finishing a body panel replacement so it matches
- Replacing illegible safety or warning labels
Signs Your "North Star" Logo Needs Replacing
- Edges lifting or peeling away from the panel
- Colors faded or chalky from sun exposure
- Tears, scuffs or missing sections
- A new panel installed without its matching graphic
- Warning information you can no longer read
Installation Tips
- Remove the old decal by warming it gently with a heat gun or hair dryer and peeling slowly.
- Clean off leftover adhesive, then wipe the area with isopropyl alcohol.
- Let the surface dry and work at room temperature (roughly 60–90°F).
- Peel back a small section of backing, align one edge, and press outward with a squeegee.
- Work across the decal to push out air, press the edges firmly and avoid pressure washing for 24–48 hours.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Polaris Parts Diagrams for Your Machine
Find part #7078465 and every part installed with it in the factory Polaris parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Polaris parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your "North Star" Logo with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Polaris "North Star" Logo?
The genuine Polaris part number is 7078465. Use it to match this part to your factory parts diagram.
Which Polaris models does part #7078465 fit?
It fits 636 Polaris ACE, ATP, Farmhand, General, Hawkeye, Magnum, Outlaw, Phoenix, Predator, RZR, Ranger, Sawtooth, Scrambler, Sportsman, Trail Blazer and Trail Boss models from 2003 to 2026. The complete list is in the fitment tables above.
Is this a genuine Polaris part?
Yes. This is a genuine Polaris OEM part, the same part number used at the factory, not an aftermarket copy.
Will this decal match my other graphics?
Yes. It is the genuine Polaris graphic for the listed models and years. Graphics on older machines may have faded slightly, so a new decal can look brighter at first.
Do I need to remove the panel to install it?
Usually not. Removing the panel can make cleaning and alignment easier on tight curves.
Can I apply it in cold weather?
For the best bond, apply it at room temperature. Warm the panel first if you are working in a cold garage.
Order Your Genuine Polaris "North Star" Logo Today
Get your Polaris ATV or side-by-side back to factory condition. Add the genuine Polaris "North Star" Logo (part #7078465) to your cart today, and order the related parts above at the same time so you can finish the job in one go.
Where to Ride Your Polaris
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.