Genuine Polaris Ignition Decal Lighting — OEM Part #7173015
Restore the showroom look of your Polaris ATV or side-by-side with the genuine Polaris Ignition Decal Lighting. It is the same factory graphic applied on the assembly line, so the colors, cut lines and logos line up with the rest of your machine instead of standing out as a replacement.
Decals and labels do more than look good. Model graphics identify your machine, and warning labels carry safety and loading information that must stay legible. This part is confirmed for 36 Polaris models from 2005 to 2022. See the full fitment list below.
Ignition Decal Lighting at a Glance
-
OEM part number: 7173015
-
Brand: Polaris (genuine factory part)
-
Part type: OEM Decal
-
Fits: ACE single-seat, ATP ATV, Hawkeye ATV, RZR sport side-by-side, Ranger utility side-by-side, Scrambler ATV, Sportsman ATV, Trail Blazer ATV and Trail Boss ATV models, 2005–2022
-
Condition: New
Polaris Models and Years This Ignition Decal Lighting Fits
Genuine Polaris part #7173015 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Polaris ACE single-seat Fitment
| Model |
Model Years |
| Polaris ACE 570 EFI Euro (International) |
2017–2018 |
Polaris ATP ATV Fitment
| Model |
Model Years |
| Polaris Atp 330 4x4 |
2005 |
Polaris Hawkeye ATV Fitment
| Model |
Model Years |
| Polaris Hawkeye (International) |
2006–2007 |
Polaris RZR sport side-by-side Fitment
| Model |
Model Years |
| Polaris RZR 4 |
2011 |
| Polaris RZR 4 EPS |
2012 |
| Polaris RZR 570 |
2012–2013, 2015 |
| Polaris RZR 570 EPS |
2020 |
| Polaris RZR 570 EPS Eu |
2019 |
| Polaris RZR 570 Eu |
2019 |
| Polaris RZR 570 Intl |
2016–2018 |
| Polaris RZR 570 MD (International) |
2019 |
| Polaris RZR 800 S |
2010–2011 |
| Polaris RZR 900 |
2014 |
| Polaris RZR 900 4 Intl |
2014 |
| Polaris RZR 900 XC Edition EPS |
2016 |
| Polaris RZR 900 XC Edition Intl |
2015 |
| Polaris RZR S |
2012–2013 |
| Polaris RZR S 800 Intl |
2014 |
| Polaris RZR Trail |
2021 |
| Polaris RZR Trail 570 |
2021–2022 |
| Polaris RZR Trail 570 Premium |
2021 |
| Polaris RZR XP 900 |
2012–2013 |
| Polaris RZR XP 1000 Intl |
2014–2016 |
Polaris Ranger utility side-by-side Fitment
| Model |
Model Years |
| Polaris Ranger 570 |
2015 |
| Polaris Ranger 570 Intl |
2016 |
| Polaris Ranger 900 XP (International) |
2015–2016 |
| Polaris Ranger 1000 Diesel (International) |
2015–2016 |
| Polaris Ranger Diesel Intl |
2015–2016 |
| Polaris Ranger ETX |
2015 |
| Polaris Ranger XP 900 |
2016 |
| Polaris Ranger XP 900 Intl |
2015 |
Polaris Scrambler ATV Fitment
| Model |
Model Years |
| Polaris Scrambler 500 4x4 (International) |
2010–2012 |
Polaris Sportsman ATV Fitment
| Model |
Model Years |
| Polaris Sportsman 500 EFI (International) |
2006 |
Polaris Trail Blazer ATV Fitment
| Model |
Model Years |
| Polaris Trail Blazer 330 (International) |
2010–2013 |
Polaris Trail Boss ATV Fitment
| Model |
Model Years |
| Polaris Trail Boss 330 |
2005 |
| Polaris Trail Boss 330 Intl |
2010–2012 |
Why Choose a Genuine Polaris OEM Ignition Decal Lighting?
- Exact factory color match, so it blends with the graphics around it
- Pre-cut to the original outline, with no trimming
- Correct placement for the specific panel it was designed for
- Keeps your machine looking original, which helps at resale or trade-in
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Polaris model we support
Features and Materials
Key Features
- Genuine Polaris OEM graphic, part #7173015
- UV-resistant inks made for outdoor powersports use
- Pressure-sensitive adhesive backing for a clean, bubble-free bond
- Sized and shaped for the original panel location
- Ready to apply. No paint, primer or special tools needed
Materials and Construction
Polaris factory decals use a durable vinyl film with a protective top layer that resists sun fade, fuel splash, pressure washing and trail abrasion. The adhesive is designed to hold on curved plastic panels through heat cycles and vibration.
Common Reasons Riders Replace This Part
- Replacing graphics scratched or peeled by brush and roost
- Refreshing a machine before selling or trading it in
- Finishing a body panel replacement so it matches
- Replacing illegible safety or warning labels
Signs Your Ignition Decal Lighting Needs Replacing
- Edges lifting or peeling away from the panel
- Colors faded or chalky from sun exposure
- Tears, scuffs or missing sections
- A new panel installed without its matching graphic
- Warning information you can no longer read
Installation Tips
- Remove the old decal by warming it gently with a heat gun or hair dryer and peeling slowly.
- Clean off leftover adhesive, then wipe the area with isopropyl alcohol.
- Let the surface dry and work at room temperature (roughly 60–90°F).
- Peel back a small section of backing, align one edge, and press outward with a squeegee.
- Work across the decal to push out air, press the edges firmly and avoid pressure washing for 24–48 hours.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Polaris Parts Diagrams for Your Machine
Find part #7173015 and every part installed with it in the factory Polaris parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Polaris parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Ignition Decal Lighting with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Polaris Ignition Decal Lighting?
The genuine Polaris part number is 7173015. Use it to match this part to your factory parts diagram.
Which Polaris models does part #7173015 fit?
It fits 36 Polaris ACE, ATP, Hawkeye, RZR, Ranger, Scrambler, Sportsman, Trail Blazer and Trail Boss models from 2005 to 2022. The complete list is in the fitment tables above.
Is this a genuine Polaris part?
Yes. This is a genuine Polaris OEM part, the same part number used at the factory, not an aftermarket copy.
Will this decal match my other graphics?
Yes. It is the genuine Polaris graphic for the listed models and years. Graphics on older machines may have faded slightly, so a new decal can look brighter at first.
Do I need to remove the panel to install it?
Usually not. Removing the panel can make cleaning and alignment easier on tight curves.
Can I apply it in cold weather?
For the best bond, apply it at room temperature. Warm the panel first if you are working in a cold garage.
Order Your Genuine Polaris Ignition Decal Lighting Today
Ride with confidence on parts built for your machine. Order the genuine Polaris Ignition Decal Lighting, OEM part #7173015, from Witchdoctors today and keep your Polaris ATV or side-by-side running the way Polaris designed it.
Where to Ride Your Polaris
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.