EBC Polaris UTV Rotor UTVX6312
Get smooth, powerful braking with the EBC Polaris UTV Rotor UTVX6312.
Rotors are the surface the pads squeeze. They wear thinner with use, can warp from heat and get grooved by grit, which reduces braking and causes vibration.
At a Glance
-
Brand: EBC Brakes
-
Part number: UTVX6312
-
Product type: Brake Rotors & Guards
-
Make: Polaris
About EBC Rotors
EBC makes standard replacement rotors, lightweight Pro-Lite designs and UTV-specific rotors. Pair new rotors with new pads for the best braking and bed them in together.
How to Bed In New Pads
New pads need a short break-in so they transfer an even layer of friction material to the rotor. Find a safe, open area and make 8 to 10 moderate stops from about 30 mph down to 5 mph without locking the wheels, then ride a few minutes without braking to let everything cool. Avoid hard stops for the first 100 miles. Proper bedding gives stronger, quieter, more consistent braking for the life of the pads.
Rotor Care
Keep rotors clean and free of oil or chain lube, which glazes pads. Check thickness with a micrometer at every pad change and replace rotors at the minimum thickness stamped on the rotor. A rotor that pulses under braking is usually warped or has uneven pad deposits; new pads and proper bedding often fix deposits, but a warped rotor must be replaced.
Signs It's Time to Replace
- Pulsing lever or pedal
- Rotor below minimum thickness
- Deep grooves or cracks
- Blue heat marks
Fitment
Made for Polaris. EBC part numbers are application-specific. Match UTVX6312 to your year, make, model and position in EBC's application guide, or contact us with your year, make and model and we will confirm fit.
Why Choose EBC?
- Precision fit and finish
- Smooth, vibration-free braking
- Works with EBC pads
- Direct replacement
EBC Brakes is one of the world's best-known brake brands, with pads, shoes, rotors and clutch parts for motorcycles, ATVs and UTVs. Witchdoctors stocks EBC for Victory and Indian motorcycles and for popular off-road machines.
Common Uses
- Replacing worn or warped rotors
- Upgrading to lighter rotors
- Brake rebuilds
- Pairing with new pads
Installation Overview
- Remove the wheel and caliper following your service manual.
- Remove the old rotor bolts, using new bolts or thread locker as specified.
- Install the new rotor and torque bolts in a cross pattern.
- Install new pads and reinstall the caliper.
- Bed in the pads and rotor.
Brakes are safety parts. Follow your service manual, and if you are unsure, read when to seek professional help or DIY or have a qualified technician install them.
Tips from the Witchdoctors Garage
- Clean new rotors with brake cleaner.
- Torque bolts in a cross pattern.
- Check runout if you can.
- Bed in carefully.
More EBC Parts for Polaris
Complete the Job
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the EBC part number?
The part number is UTVX6312. EBC parts are listed by application, so use it to confirm fit.
Is this genuine EBC?
Yes. Witchdoctors sells genuine EBC Brakes products.
Should I replace pads with rotors?
Yes. New pads on new rotors bed in best.
Do I need new rotor bolts?
Use new bolts or thread locker as your manual specifies.
Front or rear?
Check the position listed.
How fast does Witchdoctors ship?
See how long it will take to receive your order for current timing.
Order Today
Ride with confidence. Order the EBC Polaris UTV Rotor UTVX6312 from Witchdoctors today.
Where to Ride Off-Road
Ready to put it to work? These off-road parks welcome ATVs and UTVs. Check current rules, road conditions and permit requirements before you go.