Genuine Polaris Air Filter Pre-Cleaner Sleeve — OEM Part #5811633
Off-road engines live and die by clean air. The genuine Polaris Air Filter Pre-Cleaner Sleeve seals the intake on your Polaris ATV or side-by-side exactly as the factory intended, keeping dust, water and grit out of the throttle body and cylinders.
The intake path, from inlet to airbox to throttle body, has to stay sealed. One cracked boot or warped lid can let in enough dust to wear out an engine fast. This part is confirmed for 222 Polaris models from 2002 to 2026. See the full fitment list below.
Air Filter Pre-Cleaner Sleeve at a Glance
-
OEM part number: 5811633
-
Brand: Polaris (genuine factory part)
-
Part type: Airbox Components
-
Fits: ATP ATV, Polaris ATV, Farmhand utility vehicle, Hawkeye ATV, Magnum ATV, other Polaris, Ranger utility side-by-side, Scrambler ATV, Series 10/11 ATV, Sportsman ATV, Trail Blazer ATV and Trail Boss ATV models, 2002–2026
-
Condition: New
Polaris Models and Years This Air Filter Pre-Cleaner Sleeve Fits
Genuine Polaris part #5811633 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
This part is shared across 222 Polaris model variants, so the table below groups them by model family. Your exact trim is listed in the parts diagrams linked further down.
Polaris ATP ATV Fitment
| Model Family |
Model Years |
Trims |
| Polaris ATP 500 |
2004–2005 |
1 |
Polaris Polaris ATV Fitment
| Model Family |
Model Years |
Trims |
| Polaris ATV PRO |
2002 |
1 |
Polaris Farmhand utility vehicle Fitment
| Model Family |
Model Years |
Trims |
| Polaris Farmhand HD |
2017 |
1 |
Polaris Hawkeye ATV Fitment
| Model Family |
Model Years |
Trims |
| Polaris Hawkeye 325 |
2015 |
1 |
| Polaris Hawkeye 400 |
2011–2013 |
2 |
Polaris Magnum ATV Fitment
| Model Family |
Model Years |
Trims |
| Polaris Magnum 500 |
2003 |
1 |
Polaris other Polaris Fitment
| Model Family |
Model Years |
Trims |
| Polaris Polaris |
2015 |
1 |
Polaris Ranger utility side-by-side Fitment
| Model Family |
Model Years |
Trims |
| Polaris Ranger 700 |
2002 |
1 |
Polaris Scrambler ATV Fitment
| Model Family |
Model Years |
Trims |
| Polaris Scrambler 2x4 |
2008–2009 |
1 |
| Polaris Scrambler 500 |
2003–2012 |
2 |
| Polaris Scrambler 850 |
2013–2026 |
6 |
| Polaris Scrambler 1000 |
2014–2019, 2022–2026 |
6 |
| Polaris Scrambler HO |
2013 |
1 |
| Polaris Scrambler XP |
2014–2018, 2020–2021, 2026 |
7 |
Polaris Series 10/11 ATV Fitment
| Model Family |
Model Years |
Trims |
| Polaris Series 10 |
2003 |
2 |
Polaris Sportsman ATV Fitment
| Model Family |
Model Years |
Trims |
| Polaris Sportsman |
2015–2016 |
6 |
| Polaris Sportsman 6x6 |
2003–2008 |
1 |
| Polaris Sportsman 48" |
2020 |
1 |
| Polaris Sportsman 400 |
2003–2005, 2008–2014 |
3 |
| Polaris Sportsman 450 |
2006–2007, 2016–2020 |
6 |
| Polaris Sportsman 500 |
2003–2013 |
7 |
| Polaris Sportsman 550 |
2010–2014 |
3 |
| Polaris Sportsman 570 |
2014–2024 |
46 |
| Polaris Sportsman 600 |
2003–2005 |
1 |
| Polaris Sportsman 700 |
2003–2007 |
2 |
| Polaris Sportsman 800 |
2005–2014 |
6 |
| Polaris Sportsman 850 |
2014–2026 |
15 |
| Polaris Sportsman 1000 |
2015–2019, 2023–2026 |
7 |
| Polaris Sportsman EFI |
2016–2017 |
1 |
| Polaris Sportsman ETX |
2015 |
2 |
| Polaris Sportsman Forest |
2011–2012 |
7 |
| Polaris Sportsman Mv7 |
2005 |
1 |
| Polaris Sportsman Touring |
2008–2026 |
29 |
| Polaris Sportsman X2 |
2006–2014, 2019 |
10 |
| Polaris Sportsman XP |
2009–2026 |
31 |
Polaris Trail Blazer ATV Fitment
| Model Family |
Model Years |
Trims |
| Polaris Trail Blazer 330 |
2010–2013 |
1 |
Polaris Trail Boss ATV Fitment
| Model Family |
Model Years |
Trims |
| Polaris Trail Boss 330 |
2010–2013 |
2 |
Why Choose a Genuine Polaris OEM Air Filter Pre-Cleaner Sleeve?
- Factory seal against dust, water and debris
- Correct airflow for the factory fuel and ignition mapping
- Direct fit with original clamps, ducts and mounts
- Helps prevent premature engine wear
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Polaris model we support
Features and Materials
Key Features
- Genuine Polaris OEM intake part, part #5811633
- Molded to original airbox and duct dimensions
- Heat- and fuel-vapor-resistant materials
- Designed for dusty, muddy and wet riding
- Works with factory air filters and sensors
Materials and Construction
Polaris intake parts use rigid, heat-stable plastics for airbox housings and lids, flexible rubber or TPE boots and ducts that seal under vibration, and filter media designed to trap fine dust while keeping airflow.
Common Reasons Riders Replace This Part
- Replacing a cracked airbox, lid or intake boot
- Restoring the seal after water or mud intrusion
- Routine filter and wear-item replacement
- Fixing idle and performance problems from an air leak
Signs Your Air Filter Pre-Cleaner Sleeve Needs Replacing
- Dust on the clean side of the air filter
- Cracks or splits in boots, ducts or the airbox
- Rough idle, hesitation or a lean condition
- Whistling or sucking noises from the intake
- Water in the airbox after a crossing
Installation Tips
- Check the Polaris parts diagram for clamps, seals and duct routing.
- Remove the old part and clean dust from the airbox and throttle body inlet.
- Install the new part, making sure every edge seals.
- Tighten clamps evenly without overtightening plastic fittings.
- Start the engine and check for air leaks and a smooth idle.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Polaris Parts Diagrams for Your Machine
Find part #5811633 and every part installed with it in the factory Polaris parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Polaris parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Air Filter Pre-Cleaner Sleeve with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Polaris Air Filter Pre-Cleaner Sleeve?
The genuine Polaris part number is 5811633. Use it to match this part to your factory parts diagram.
Which Polaris models does part #5811633 fit?
It fits 222 Polaris ATP, ATV, Farmhand, Hawkeye, Magnum, Ranger, Scrambler, Series, Sportsman, Trail Blazer and Trail Boss models from 2002 to 2026. The complete list is in the fitment tables above.
Is this a genuine Polaris part?
Yes. This is a genuine Polaris OEM part, the same part number used at the factory, not an aftermarket copy.
How often should I check my air filter?
After every dusty ride if possible, and replace it at the interval in your owner's manual or sooner.
Can an intake leak damage my engine?
Yes. Unfiltered air carries fine dust that wears pistons, rings and cylinders quickly.
Will this change performance?
It restores factory airflow and sealing. If you had a leak, expect a smoother idle and better response.
Order Your Genuine Polaris Air Filter Pre-Cleaner Sleeve Today
Get your Polaris ATV or side-by-side back to factory condition. Add the genuine Polaris Air Filter Pre-Cleaner Sleeve (part #5811633) to your cart today, and order the related parts above at the same time so you can finish the job in one go.
Where to Ride Your Polaris
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.