Ask any woods or motocross rider: good hand protection pays for itself the first time you go down. The Cycra Probend Handguard U-Clamp for Pro Taper Bars (1CYC-1150-02) is part of the Cycra handguard system that riders and racers have trusted for years.
Witchdoctors sells genuine Cycra parts by part number. Review the details below, and contact our team before you order if you’re unsure about fitment.
Why Choose the Cycra Probend Handguard U-Clamp for Pro Taper Bars
Handguards only protect you if they stay tight. After a few crashes, clamps, bar ends and sliders wear, bend or strip. Cycra replacement hardware keeps your Probend handguards fresh and tight, and the aluminum parts are CNC-machined from billet for fit and strength.
Key Benefits
- Genuine Cycra replacement part for Probend handguards
- Keeps your handguards fresh and tight
- Keeps your handguards tight and aligned
- Designed by Cycra, a leader in off-road protection
Features and Specifications
- U-clamp mount for Pro Taper handlebars
- CNC-machined from billet aluminum for fit and strength
- Genuine Cycra replacement part for Probend handguards
- Keeps your handguards fresh and tight
Product Details
-
Brand: Cycra
-
Part number: 1CYC-1150-02
-
Product type: handguard replacement hardware
-
Fits: Cycra Probend handguards
Fitment
This listing doesn’t have model-specific fitment. It fits Cycra Probend handguards.
- Match the part to your handguard model and handlebar brand or size before ordering
- Check the space between your grips, levers and mounts for the clamp
- Contact our team with your year, make and model if you’re not sure
See how to measure motorcycle handlebars for help finding your bar size.
Installation Tips
- Remove the worn or damaged hardware, noting how each piece is oriented.
- Fit the new part with the hardware supplied, following Cycra’s instructions.
- Set the position so levers, the throttle and the clutch work freely through their full travel.
- Tighten all fasteners evenly to the torque Cycra recommends.
- Turn the bars lock to lock and check that nothing binds, and that the throttle snaps closed on its own.
Pro Tip
Check your handguard bolts after every few rides. Vibration and impacts loosen hardware, and a loose guard can rotate into your levers.
Care and Inspection
Wash shields with mild soap and water, and avoid harsh solvents on plastic. After any crash, check the bars, clamps and shields for cracks or bends, and replace damaged parts before your next ride.
Complete Your Setup
Shop the full Cycra handguards collection, plus riding gloves and riding boots.
Helpful Guides From the Witchdoctors Blog
Frequently Asked Questions
Which hardware do I need?
It depends on your handguard model and your handlebar brand and size. Contact our team with your bike and handguards, and we’ll confirm the part.
Are these made in the USA?
Cycra makes much of its handguard line in the USA. Contact us if country of origin matters to you.
Is this a genuine Cycra part?
Yes. Witchdoctors sells genuine Cycra parts by part number.
Can I return it?
Contact our customer service team before installing the part, and we’ll help under our return policy.
Where to Ride
Bolt it on, then put it to the test at one of these off-road destinations:
Order the Cycra Probend Handguard U-Clamp for Pro Taper Bars Today
Add Cycra Probend Handguard U-Clamp for Pro Taper Bars (1CYC-1150-02) to your cart, and Witchdoctors will ship it fast. Questions about fitment? Contact our team and we’ll help you choose the right Cycra protection.
General Safety Warning & Installation Requirements
Your safety is our top priority. Whether you are maintaining a Victory® or Indian® Motorcycle,
or servicing a UTV, ATV, or Side-by-Side, proper installation is vital to the performance and safety
of your vehicle.
Important:
⚠️
Warning: Failure to follow manufacturer-specified installation procedures and
safety requirements can result in mechanical failure, loss of vehicle control, serious injury, or death.
Important Fitment Disclosure
At Witchdoctors, we want to ensure you get back on the road or trail as quickly as possible. Correct fitment
is the most critical step in purchasing parts for your Victory® or Indian® Motorcycle. Also for your
Polaris®, CFMoto®, Arctic Cat®, Yamaha®, Honda®, Can-Am®, Kawasaki® UTV and ATV.
⚠️
Verification Required: While we strive for 100% accuracy, vehicle manufacturers often
make mid-year production changes. Always verify your specific year, make, and model before finalizing
your order.
Read More
Shipping
Qualifying Retail orders $159.99 or more will receive free ground shipping. Free Shipping Terms and conditions.
All orders over $500 will require a signature.
Please see International Shipping page for orders shipping outside the US.
See our full Shipping Policy page for further details.
Product Availability
We show real time product availability. These products normally ship the same business day but may ship from one of our warehouses across the country. If an item requires additional processing time you will be notified.
Returns
If your order arrives and it is not right, we will we'll fix it. We promise!
Doesn't fit or just not happy with it? You can return any new, unopened, unused or unaltered item within 30 days of delivery receipt of your item. We will issue a refund to your original payment method.
See our full Return Policy for all of the pertinent details.