Genuine Kawasaki Propeller Shaft Spring — OEM Part #92145-1583
Put power to the ground reliably with a genuine Kawasaki Propeller Shaft Spring. Built for the Brute Force 750, it matches the original splines, bearings and housings, so it works with your transmission, gearcases and 4WD system.
The transmission, shift mechanism, gearcases and drive shafts carry the full torque of the engine. Worn or mismatched parts cause noise, hard shifting and expensive failures. This part is confirmed for 7 Kawasaki models from 2015 to 2025. See the full fitment list below.
Propeller Shaft Spring at a Glance
-
OEM part number: 92145-1583
-
Brand: Kawasaki (genuine factory part)
-
Part type: Propeller / Drive Shaft Components
-
Fits: Brute Force ATV models, 2015–2025
-
Condition: New
Kawasaki Models and Years This Propeller Shaft Spring Fits
Genuine Kawasaki part #92145-1583 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Kawasaki Brute Force ATV Fitment
| Model |
Model Years |
| Kawasaki Brute Force 750 |
2024–2025 |
| Kawasaki Brute Force 750 4x4i |
2015–2021 |
| Kawasaki Brute Force 750 4x4i EPS |
2015–2023 |
| Kawasaki Brute Force 750 4x4i EPS Camo |
2015–2023 |
| Kawasaki Brute Force 750 EPS |
2024–2025 |
| Kawasaki Brute Force 750 LE EPS |
2024–2025 |
| Kawasaki Brute Force 750 LE EPS Camo |
2024–2025 |
Why Choose a Genuine Kawasaki OEM Propeller Shaft Spring?
- Exact gear, spline and bearing fit
- Restores smooth, positive shifting and range selection
- Designed for full engine torque and load
- Lowers the risk of repeat failures
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Kawasaki model we support
Features and Materials
Key Features
- Genuine Kawasaki OEM drivetrain part, part #92145-1583
- Machined to Kawasaki's original specifications
- Hardened surfaces where applicable
- Matches factory seals, bearings and mounting
- Designed for the listed Kawasaki models
Materials and Construction
Kawasaki drivetrain parts use heat-treated alloy steel for gears, shafts, forks and splines, sealed bearings, and aluminum or cast housings, with oil- and weather-resistant seals and boots.
Common Reasons Owners Replace This Part
- Fixing grinding, popping out of gear or hard shifting
- Rebuilding transmissions and front or rear gearcases
- Fixing 4WD or differential-lock engagement problems
- Repairing leaks and vibration from drive shafts and U-joints
Signs Your Propeller Shaft Spring Needs Replacing
- Grinding, clunking or whining
- Popping out of gear or trouble selecting range
- Vibration that grows with speed
- Oil leaks at seals, covers or gearcases
- 4WD or diff lock that will not engage or release
Installation Tips
- Drain transmission or gearcase oil before disassembly.
- Follow the Kawasaki service manual for shimming, preload and torque specs.
- Replace seals, O-rings and gaskets you disturb.
- Lubricate gears and bearings with the specified oil during assembly.
- Refill with the correct oil and amount, then test-ride and check for leaks.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Kawasaki Parts Diagrams for Your Machine
Find part #92145-1583 and every part installed with it in the factory Kawasaki parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Kawasaki parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Propeller Shaft Spring with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Kawasaki Propeller Shaft Spring?
The genuine Kawasaki part number is 92145-1583. Use it to match this part to your factory parts diagram.
Which Kawasaki models does part #92145-1583 fit?
It fits 7 Kawasaki Brute Force models from 2015 to 2025. The complete list is in the fitment tables above.
Is this a genuine Kawasaki part?
Yes. This is a genuine Kawasaki OEM part, the same part number used at the factory, not an aftermarket copy.
What oil should I use?
Use the transmission and gearcase oils in your Kawasaki owner's manual. The wrong oil can cause wear and engagement problems.
Should I replace bearings and seals during a rebuild?
Yes. They are inexpensive compared to labor.
Can a bad drivetrain part damage other components?
Yes. Worn parts shed metal into the oil and damage gears and bearings. Repair problems early.
Order Your Genuine Kawasaki Propeller Shaft Spring Today
Work and ride with confidence on parts built for your machine. Order the genuine Kawasaki Propeller Shaft Spring, OEM part #92145-1583, from Witchdoctors today and keep your Brute Force 750 running the way Kawasaki designed it.
Where to Ride Your Kawasaki
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.