Genuine Yamaha Protector End Cap — OEM Part #JJ3-K818M-00-00
Your machine earns its keep hauling gear, feed, firewood and game. The genuine Yamaha Protector End Cap restores factory cargo and storage function on your Yamaha ATV or side-by-side, fitting the original mounts so loads stay secure and latches work the way they should.
Beds, racks, storage bins and hitch parts carry real weight over rough ground. Worn latches, cracked bins and bent brackets make loads unsafe and let water ruin what you carry. This part is confirmed for 24 Yamaha models from 2004 to 2010. See the full fitment list below.
Protector End Cap at a Glance
-
OEM part number: JJ3-K818M-00-00
-
Brand: Yamaha (genuine factory part)
-
Part type: Cargo & Dump Box Repair
-
Fits: Pro Hauler utility side-by-side, Rhino side-by-side and Wolverine recreation side-by-side models, 2004–2010
-
Condition: New
Yamaha Models and Years This Protector End Cap Fits
Genuine Yamaha part #JJ3-K818M-00-00 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Yamaha Pro Hauler utility side-by-side Fitment
| Model |
Model Years |
| Yamaha Pro Hauler 700 |
2004–2006 |
| Yamaha Pro Hauler 700 2WD |
2006 |
| Yamaha Pro Hauler 1000 |
2004–2005 |
Yamaha Rhino side-by-side Fitment
| Model |
Model Years |
| Yamaha Rhino |
2005 |
| Yamaha Rhino 450 |
2006 |
| Yamaha Rhino 450 4WD |
2006 |
| Yamaha Rhino 450 Realtree H |
2006 |
| Yamaha Rhino 450 Realtree Hd Camo |
2006 |
| Yamaha Rhino 660 |
2004 |
| Yamaha Rhino 660 4WD |
2006 |
| Yamaha Rhino 660 4WD Explorer Edition |
2006 |
| Yamaha Rhino 660 4WD Exploring |
2006 |
| Yamaha Rhino 660 4WD Hunter |
2006 |
| Yamaha Rhino 660 4WD Hunter Exploring Edition |
2006 |
| Yamaha Rhino 660 4WD SE |
2006 |
| Yamaha Rhino 660 4WD Special |
2006 |
| Yamaha Rhino 660 Hardwoods Camo Hunter Edition |
2004 |
| Yamaha Rhino 660F |
2004–2006 |
| Yamaha Rhino Hardwoods Camo |
2004 |
| Yamaha Rhino Hunter |
2005 |
Yamaha Wolverine recreation side-by-side Fitment
| Model |
Model Years |
| Yamaha Wolverine 350 2WD |
2008–2009 |
| Yamaha Wolverine 450 4WD |
2008–2010 |
| Yamaha Wolverine 450 4x4 Sport |
2008 |
| Yamaha Wolverine 450 4x4 Sport SE |
2008 |
Why Choose a Genuine Yamaha OEM Protector End Cap?
- Factory fit with the original bed, rack, box or frame
- Restores secure latching and load retention
- Keeps stored gear protected from water and dust
- Built for the rated cargo and towing use of the listed models
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Yamaha model we support
Features and Materials
Key Features
- Genuine Yamaha OEM part, part #JJ3-K818M-00-00
- Original mounting points and hardware
- Made for the vibration and loads of work and trail use
- Corrosion-resistant finish or UV-stable plastic, depending on the part
- Works with factory latches, gas struts and dump-bed hardware
Materials and Construction
Yamaha cargo and storage parts use high-strength steel for load-bearing brackets, racks, beds and hitch parts, and impact-resistant, UV-stabilized plastics for boxes, bins and lids. Rubber seals help keep moisture out.
Common Reasons Riders Replace This Part
- Hauling tools, feed, firewood and equipment
- Towing within the rated limits for your model
- Keeping gear dry in factory storage
- Repairing a bed, tailgate or box after damage
Signs Your Protector End Cap Needs Replacing
- Tailgates or lids that will not stay latched
- Cracked bins, boxes or bed panels
- Bent or broken rack and hitch brackets
- Torn or missing seals that let water in
- Dump-bed latches or struts that no longer hold
Installation Tips
- Empty the bed or compartment and support lids or beds before removing parts.
- Use the Yamaha parts diagram to identify fasteners and linkage.
- Remove the worn part and inspect nearby hinges, latches and brackets.
- Install with hardware finger-tight, check alignment, then torque to spec.
- Test latches, hinges and load security before carrying a full load.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Related OEM Parts for the Same Machines
Doing the job right? These genuine Yamaha parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Protector End Cap with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Yamaha Protector End Cap?
The genuine Yamaha part number is JJ3-K818M-00-00. Use it to match this part to your factory parts diagram.
Which Yamaha models does part #JJ3-K818M-00-00 fit?
It fits 24 Yamaha Pro Hauler, Rhino and Wolverine models from 2004 to 2010. The complete list is in the fitment tables above.
Is this a genuine Yamaha part?
Yes. This is a genuine Yamaha OEM part, the same part number used at the factory, not an aftermarket copy.
Does this change my cargo or towing capacity?
No. Capacities are set by Yamaha for your model. This part restores factory function only.
Will it fit aftermarket racks or accessories?
It is designed for the factory Yamaha setup on the listed models. Aftermarket accessories may need their own hardware.
Should I replace the latch hardware too?
If the latch, striker or hinge is worn, replace it at the same time so the new part closes and holds properly.
Order Your Genuine Yamaha Protector End Cap Today
Get your Yamaha ATV or side-by-side back to factory condition. Add the genuine Yamaha Protector End Cap (part #JJ3-K818M-00-00) to your cart today, and order the related parts above at the same time so you can finish the job in one go.
Where to Ride Your Yamaha
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.