Genuine Yamaha Radiator / Cooling Hose — OEM Part #1XD-E2564-00-00
Overheating can end a ride or a workday and ruin an engine. The genuine Yamaha Radiator / Cooling Hose restores factory cooling performance on your Viking, with the exact fit, connections and flow the system was designed around.
The radiator, water pump, fan, thermostat, hoses and reservoir work together to hold engine temperature steady. If one part fails, the whole system suffers. This part is confirmed for 15 Yamaha models from 2014 to 2026. See the full fitment list below.
Radiator / Cooling Hose at a Glance
-
OEM part number: 1XD-E2564-00-00
-
Brand: Yamaha (genuine factory part)
-
Part type: Radiator Hose / Line
-
Fits: Viking utility side-by-side models, 2014–2026
-
Condition: New
Yamaha Models and Years This Radiator / Cooling Hose Fits
Genuine Yamaha part #1XD-E2564-00-00 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Yamaha Viking utility side-by-side Fitment
| Model |
Model Years |
| Yamaha Viking |
2014–2020 |
| Yamaha Viking 700 |
2014 |
| Yamaha Viking 700 EPS |
2014 |
| Yamaha Viking 700 EPS Hunte |
2014 |
| Yamaha Viking 700 EPS Hunter |
2014 |
| Yamaha Viking 700 EPS SE |
2014 |
| Yamaha Viking 700 Hunter |
2014 |
| Yamaha Viking EPS |
2014–2026 |
| Yamaha Viking EPS Hunter |
2015–2021 |
| Yamaha Viking EPS Hunting |
2022 |
| Yamaha Viking EPS Ranch |
2018–2026 |
| Yamaha Viking EPS Ranch Edition |
2018–2023 |
| Yamaha Viking EPS SE |
2014–2017, 2019 |
| Yamaha Viking EPS Special E |
2016, 2019 |
| Yamaha Viking Hunter |
2015–2016 |
Why Choose a Genuine Yamaha OEM Radiator / Cooling Hose?
- Factory flow and capacity for your engine
- Direct-fit connections with no adapters
- Heat- and pressure-resistant construction
- Helps prevent overheating and head gasket failure
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Yamaha model we support
Features and Materials
Key Features
- Genuine Yamaha OEM cooling part, part #1XD-E2564-00-00
- Original hose sizes, mounts and connectors
- Built for the pressure and temperature of the listed engines
- Designed for mud, dust and debris
- Works with Yamaha-approved coolant
Materials and Construction
Yamaha cooling parts use aluminum radiator cores, reinforced rubber hoses rated for hot coolant under pressure, glass-reinforced plastic housings and steel or stainless clamps.
Common Reasons Riders Replace This Part
- Fixing coolant leaks and overheating
- Replacing parts damaged by mud packing or debris
- Preventive replacement of aging hoses and seals
- Restoring cooling after an engine rebuild
Signs Your Radiator / Cooling Hose Needs Replacing
- Temperature warning or rising gauge
- Coolant leaks or a sweet smell after riding
- A fan that does not run or makes noise
- Cracked, swollen or soft hoses
- Coolant bubbling or boiling over in the reservoir
Installation Tips
- Let the engine cool completely before opening the system.
- Drain coolant into a container and dispose of it properly.
- Install the new part with fresh clamps, gaskets and O-rings where specified.
- Refill with the coolant in your Yamaha manual and bleed air from the system.
- Run to operating temperature, check for leaks and top up the reservoir.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Yamaha Parts Diagrams for Your Machine
Find part #1XD-E2564-00-00 and every part installed with it in the factory Yamaha parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Yamaha parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Radiator / Cooling Hose with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Yamaha Radiator / Cooling Hose?
The genuine Yamaha part number is 1XD-E2564-00-00. Use it to match this part to your factory parts diagram.
Which Yamaha models does part #1XD-E2564-00-00 fit?
It fits 15 Yamaha Viking models from 2014 to 2026. The complete list is in the fitment tables above.
Is this a genuine Yamaha part?
Yes. This is a genuine Yamaha OEM part, the same part number used at the factory, not an aftermarket copy.
What coolant should I use?
Use the coolant type and mix in your Yamaha owner's manual. Mixing coolant types can cause gelling or corrosion.
Do I need to bleed the cooling system?
Yes. Trapped air causes hot spots and overheating. Follow the procedure for your model.
Why does my machine overheat in mud?
Mud packed in the radiator fins blocks airflow. Clean the radiator regularly from the back side with low-pressure water.
Order Your Genuine Yamaha Radiator / Cooling Hose Today
Get your Viking back to factory condition. Add the genuine Yamaha Radiator / Cooling Hose (part #1XD-E2564-00-00) to your cart today, and order the related parts above at the same time so you can finish the job in one go.
Where to Ride Your Yamaha
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.