An Image of the Genuine CFMOTO Logo reading 'GENUINE OEM PART' 9AWV-180001-8000
Black and gray radiator water inlet hose with curved design and connector fittings for CFMOTO cooling system.
Blue and red side-by-side CFMOTO ZForce and Uforce UTVs and a blue and black CFMOTO CForce ATV all designed for off-road use.
An infographic titled 'BLOCKED COOLING LOOP' with four numbered common signs and symptoms: rapid overheating, boiling and gargling, stuck radiator fan, and coolant spewing. It includes labeled illustrations of an ATV/UTV engine cooling system, a temperature gauge, a radiator, and a fan, with explanatory text and a green footer note.
Infographic explaining hot upper hose and cold lower hose coolant flow in a UTV/ATV, with a vehicle diagram, red and blue coolant lines, labeled parts like thermostat, water pump, radiator, and engine, plus a common causes section with numbered callouts.
An Image of the Genuine CFMOTO Logo reading 'GENUINE OEM PART' 9AWV-180001-8000
Black and gray radiator water inlet hose with curved design and connector fittings for CFMOTO cooling system.
Blue and red side-by-side CFMOTO ZForce and Uforce UTVs and a blue and black CFMOTO CForce ATV all designed for off-road use.
An infographic titled 'BLOCKED COOLING LOOP' with four numbered common signs and symptoms: rapid overheating, boiling and gargling, stuck radiator fan, and coolant spewing. It includes labeled illustrations of an ATV/UTV engine cooling system, a temperature gauge, a radiator, and a fan, with explanatory text and a green footer note.
Infographic explaining hot upper hose and cold lower hose coolant flow in a UTV/ATV, with a vehicle diagram, red and blue coolant lines, labeled parts like thermostat, water pump, radiator, and engine, plus a common causes section with numbered callouts.
Badge

Radiator Water Inlet Hose 9AWV-180001-8000 by CFMOTO

$29.99 USD
Normally Ships in 10-14 Business Days

Inventory:

Loading..
SKU: 9AWV-180001-8000
In stock and ready for shipping

SKU: 9AWV-180001-8000

Genuine CFMoto Radiator Water Inlet Hose — OEM Part #9AWV-180001-8000

Overheating can end a ride and ruin an engine. The genuine CFMoto Radiator Water Inlet Hose restores factory cooling performance on your CForce 800 or CForce 1000, with the exact fit, connections and flow the system was designed around.

The radiator, water pump, fan, thermostat, hoses and reservoir work together to hold engine temperature steady. If one part fails, the whole system suffers. This part is confirmed for 3 CFMoto models from 2024 to 2025. See the full fitment list below.

Radiator Water Inlet Hose at a Glance

  • OEM part number: 9AWV-180001-8000
  • Brand: CFMOTO (genuine factory part)
  • Part type: Radiator Hose / Line
  • Fits: CForce ATV models, 2024–2025
  • Condition: New

CFMoto Models and Years This Radiator Water Inlet Hose Fits

Genuine CFMoto part #9AWV-180001-8000 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.

CFMoto CForce ATV Fitment

Model Model Years
CFMoto CForce 800 Touring 2024–2025
CFMoto CForce 1000 Overland 2025
CFMoto CForce 1000 Touring 2024–2025

Why Choose a Genuine CFMoto OEM Radiator Water Inlet Hose?

  • Factory flow and capacity for your engine
  • Direct-fit connections with no adapters or modifications
  • Heat- and pressure-resistant construction
  • Helps prevent overheating, head gasket failure and warped parts
  • Sold by Witchdoctors, a CFMoto OEM parts source with factory part numbers and diagrams for every listing

Features and Materials

Key Features

  • Genuine CFMoto OEM cooling part, part #9AWV-180001-8000
  • Matches original hose sizes, mounts and connectors
  • Built for the pressure and temperature of the listed engines
  • Designed for mud, dust and debris exposure
  • Works with CFMoto-approved coolant

Materials and Construction

CFMoto cooling parts use aluminum radiator cores and tanks, reinforced EPDM rubber hoses rated for hot coolant under pressure, glass-reinforced plastic housings and steel or stainless clamps, all chosen to resist heat, vibration and coolant chemistry.

Common Reasons Riders Replace This Part

  • Fixing coolant leaks and overheating
  • Replacing parts damaged by mud packing or trail debris
  • Preventive replacement of aging hoses and seals
  • Restoring cooling after an engine rebuild

Signs Your Radiator Water Inlet Hose Needs Replacing

  • Temperature light on or a rising temperature gauge
  • Coolant leaks, drips or a sweet smell after riding
  • A fan that does not turn on or makes noise
  • Cracked, swollen or soft hoses
  • Coolant bubbling or boiling over in the reservoir

Installation Tips

  1. Let the engine cool completely before opening the cooling system.
  2. Drain coolant into a container and dispose of it properly.
  3. Install the new part using fresh clamps, gaskets and O-rings where specified.
  4. Refill with the coolant type and mix in your CFMoto manual, and bleed air from the system.
  5. Run the engine to operating temperature, check for leaks and top up the reservoir.

Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.

CFMoto Parts Diagrams for This Part

Part #9AWV-180001-8000 appears in these factory CFMoto parts diagrams. Open the diagram for your model to see exactly where it goes and which parts are installed with it:

Other OEM Parts in This Assembly

Doing the job right? These genuine CFMoto parts are installed alongside the Radiator Water Inlet Hose and are often replaced at the same time:

Recommended Accessories and Maintenance Supplies

Pair your Radiator Water Inlet Hose with these parts and supplies:

Helpful Guides from the Witchdoctors Blog

Frequently Asked Questions

What is the OEM part number for this CFMoto Radiator Water Inlet Hose?

The genuine CFMoto part number is 9AWV-180001-8000. Use it to match this part to your factory parts diagram.

Which CFMoto models does part #9AWV-180001-8000 fit?

It fits the CForce 800 Touring (2024–2025); CForce 1000 Overland (2025); CForce 1000 Touring (2024–2025).

Is this a genuine CFMoto part?

Yes. This is a genuine CFMOTO OEM part, the same part number used by CFMoto at the factory, not an aftermarket copy.

What coolant should I use?

Use the coolant type and mix ratio in your CFMoto owner's manual. Mixing coolant types can cause gelling or corrosion.

Do I need to bleed the cooling system?

Yes. Trapped air can cause hot spots and overheating. Follow the bleeding procedure for your model after any repair.

Why does my machine overheat in mud?

Mud packed in the radiator fins blocks airflow. Clean the radiator regularly with low-pressure water from the back side.

Order Your Genuine CFMoto Radiator Water Inlet Hose Today

Get your CForce 800 or CForce 1000 back to factory condition. Add the genuine CFMoto Radiator Water Inlet Hose (part #9AWV-180001-8000) to your cart today, and order the related parts above at the same time so you can finish the job in one go.

Where to Ride Your CFMoto

Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.

General Safety Warning & Installation Requirements

Your safety is our top priority. Whether you are maintaining a Victory® or Indian® Motorcycle, or servicing a UTV, ATV, or Side-by-Side, proper installation is vital to the performance and safety of your vehicle.

Important:
Warning: Failure to follow manufacturer-specified installation procedures and safety requirements can result in mechanical failure, loss of vehicle control, serious injury, or death.

Important Fitment Disclosure

At Witchdoctors, we want to ensure you get back on the road or trail as quickly as possible. Correct fitment is the most critical step in purchasing parts for your Victory® or Indian® Motorcycle. Also for your Polaris®, CFMoto®, Arctic Cat®, Yamaha®, Honda®, Can-Am®, Kawasaki® UTV and ATV.

Verification Required: While we strive for 100% accuracy, vehicle manufacturers often make mid-year production changes. Always verify your specific year, make, and model before finalizing your order.
Read More

Shipping

Qualifying Retail orders $159.99 or more will receive free ground shipping. Free Shipping Terms and conditions.

All orders over $500 will require a signature.

Please see International Shipping page for orders shipping outside the US.

See our full Shipping Policy page for further details.

Product Availability

We show real time product availability. These products normally ship the same business day but may ship from one of our warehouses across the country. If an item requires additional processing time you will be notified.

Returns

If your order arrives and it is not right, we will we'll fix it. We promise!

Doesn't fit or just not happy with it? You can return any new, unopened, unused or unaltered item within 30 days of delivery receipt of your item. We will issue a refund to your original payment method.

See our full Return Policy for all of the pertinent details.

Found URLs: