Rear A-Arm, Right, (Upper) 401B-060100 by CFMOTO

Genuine CFMoto Rear A-Arm, Right, (Upper) — OEM Part #401B-060100

Worn suspension parts turn a smooth ride into a punishing one and make handling unpredictable. The genuine CFMoto Rear A-Arm, Right, (Upper) restores the factory geometry, travel and ride quality of your CForce 600.

A-arms, trailing arms, shocks, springs, sway bars, knuckles and bushings control wheel movement and alignment. Bent or worn parts cause wandering, uneven tire wear and harsh handling. This part is confirmed for 3 CFMoto models from 2010 to 2014. See the full fitment list below.

Rear A-Arm, Right, (Upper) at a Glance

• OEM part number: 401B-060100
• Brand: CFMOTO (genuine factory part)
• Part type: A-Arm
• Position: Rear, Right, Upper
• Fits: CForce ATV models, 2010–2014
• Condition: New

CFMoto Models and Years This Rear A-Arm, Right, (Upper) Fits

Genuine CFMoto part #401B-060100 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.

CFMoto CForce ATV Fitment

Why Choose a Genuine CFMoto OEM Rear A-Arm, Right, (Upper)?

• Factory geometry for straight tracking and predictable handling
• Correct bushing and ball joint fit
• Restores original ride height and travel
• Spreads loads across the frame as CFMoto designed
• Sold by Witchdoctors, a CFMoto OEM parts source with factory part numbers and diagrams for every listing

Features and Materials

Key Features

• Genuine CFMoto OEM suspension part, part #401B-060100
• Matches original mounting points and dimensions
• Corrosion-resistant coating where applicable
• Built for full-travel off-road use
• Works with factory bushings, ball joints and hardware

Materials and Construction

CFMoto suspension parts use high-strength steel or forged components for arms, knuckles and linkages, with corrosion-resistant coatings. Bushings use rubber or polymer compounds, and shocks use steel bodies, chrome-plated shafts and nitrogen- or oil-charged dampers.

Common Reasons Riders Replace This Part

• Replacing bent arms, knuckles or links after an impact
• Fixing clunks, play and wandering from worn bushings
• Restoring ride height and damping
• Rebuilding the suspension on a high-hour machine

Signs Your Rear A-Arm, Right, (Upper) Needs Replacing

• Clunking or knocking over bumps
• Wandering, pulling or loose handling
• Uneven or rapid tire wear
• Visible bends, cracks or leaking shocks
• Play in ball joints or bushings when you rock the wheel

Installation Tips

1. Support the machine safely with the suspension unloaded.
2. Check the CFMoto parts diagram for bushings, ball joints and hardware.
3. Remove the damaged part and check the frame mounts for damage.
4. Install the new part, tightening pivot bolts with the suspension at ride height if the manual specifies.
5. Torque all hardware, check the alignment (toe), and recheck after the first ride.

Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.

Recommended Accessories and Maintenance Supplies

Pair your Rear A-Arm, Right, (Upper) with these parts and supplies:

• Suspension components — A-arms, bushings and suspension parts
• UTV and ATV shocks — Replacement and performance shocks
• A-arm bushings — Bushings for A-arms and trailing arms
• Ball joints — Upper and lower ball joints
• CFMoto OEM parts diagrams — find every factory part for your model

Helpful Guides from the Witchdoctors Blog

• What Is the Difference Between a Shock and Strut?
• Buyer's Guide to UTV Sway Bars and Sway Bar Links
• OEM vs Aftermarket ATV Swingarms: Which is Best?
• CFMoto OEM vs. Aftermarket Parts: Which Is Better?

Frequently Asked Questions

What is the OEM part number for this CFMoto Rear A-Arm, Right, (Upper)?

The genuine CFMoto part number is 401B-060100. Use it to match this part to your factory parts diagram.

Which CFMoto models does part #401B-060100 fit?

It fits the CForce 600 LWB (2013–2014); CForce 600 X6 LWB (2010–2012); CForce 600 X6 SWB (2010–2012).

Is this a genuine CFMoto part?

Yes. This is a genuine CFMOTO OEM part, the same part number used by CFMoto at the factory, not an aftermarket copy.

Do I need an alignment after replacing suspension parts?

It is a good idea. Arms, knuckles and tie rods affect toe settings, so check and adjust toe after installation.

Should I replace both sides?

For wear items like bushings and shocks, replacing in pairs keeps handling balanced. Impact damage may only need one side.

Is OEM better than aftermarket suspension?

OEM parts restore the factory ride and geometry. Aftermarket arms may add strength or travel but often change geometry.

Order Your Genuine CFMoto Rear A-Arm, Right, (Upper) Today

Get your CForce 600 back to factory condition. Add the genuine CFMoto Rear A-Arm, Right, (Upper) (part #401B-060100) to your cart today, and order the related parts above at the same time so you can finish the job in one go.

• How long will it take to receive my order?
• Shipping and return policy
• Questions about fitment? Contact us
• Shop all CFMoto OEM parts

Where to Ride Your CFMoto

Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.

• Turkey Bay OHV Area at Land Between the Lakes — Golden Pond, Kentucky: about 100 miles of trails
• Stony Lonesome OHV Park — Bremen, Alabama: about 100 miles of trails