Rear CV Axle Shaft, Left 9060-280100-30000 by CFMOTO

Genuine CFMoto Rear CV Axle Shaft, Left — OEM Part #9060-280100-30000

A clicking CV joint or torn boot will leave you stranded if you ignore it. The genuine CFMoto Rear CV Axle Shaft, Left restores factory strength and articulation on your ZForce 600, with the original spline count, length and joint angles.

Axles, CV joints, bearings and hubs carry power to the wheels while the suspension cycles through its travel. They take constant shock loads, and any wear shows up as clicking, vibration or play. This part is confirmed for 1 CFMoto model from 2012 to 2015. See the full fitment list below.

Rear CV Axle Shaft, Left at a Glance

• OEM part number: 9060-280100-30000
• Brand: CFMOTO (genuine factory part)
• Part type: Axle Shaft
• Position: Rear, Left
• Fits: ZForce sport UTV models, 2012–2015
• Condition: New

CFMoto Models and Years This Rear CV Axle Shaft, Left Fits

Genuine CFMoto part #9060-280100-30000 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.

CFMoto ZForce sport UTV Fitment

Why Choose a Genuine CFMoto OEM Rear CV Axle Shaft, Left?

• Exact spline count and length for a direct fit
• Factory CV joint angles for full suspension travel
• Designed for the torque of the listed engines
• Sealed boots and bearings to keep out water and grit
• Sold by Witchdoctors, a CFMoto OEM parts source with factory part numbers and diagrams for every listing

Features and Materials

Key Features

• Genuine CFMoto OEM axle or hub part, part #9060-280100-30000
• Matches original spline, length and bearing dimensions
• Heat-treated shafts and joints where applicable
• Boots and seals designed for mud and water
• Fits the listed CFMoto models without modification

Materials and Construction

CFMoto axles use heat-treated alloy steel shafts and CV joints packed with high-temperature grease and sealed with thermoplastic or rubber boots. Hubs and bearings use hardened steel races and seals designed for water crossings and mud.

Common Reasons Riders Replace This Part

• Replacing an axle with a clicking or broken CV joint
• Fixing torn boots before dirt ruins the joint
• Replacing worn wheel bearings and hubs
• Repairs after a hard impact or broken axle

Signs Your Rear CV Axle Shaft, Left Needs Replacing

• Clicking or popping when turning under power
• Torn or leaking CV boots with grease slung around the wheel
• Vibration at speed or under acceleration
• Play or grinding in the wheel bearing
• A broken axle or wheel that will not drive

Installation Tips

1. Raise and support the machine safely and remove the wheel.
2. Remove the axle nut. Many CFMoto axle nuts are single-use, so replace it.
3. Separate the suspension as needed to remove the old axle, keeping the boot off sharp edges.
4. Install the new part, making sure the splines fully seat and the circlip engages.
5. Torque the axle nut and suspension hardware to spec, then reinstall the wheel and test-ride.

Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.

Recommended Accessories and Maintenance Supplies

Pair your Rear CV Axle Shaft, Left with these parts and supplies:

• UTV axles — OEM-style and heavy-duty axles
• CV boots — CV boot kits and clamps
• Wheel bearings — Wheel bearings and seal kits
• Bearing grease and lubricants — Grease for bearings and joints
• CFMoto OEM parts diagrams — find every factory part for your model

Helpful Guides from the Witchdoctors Blog

• UTV CV Boots Buyer’s Guide: OEM vs. Aftermarket Options
• Learn about UTV/ATV axle and cv boot guards | Guard Your Axles
• How to Tell If Your UTV or ATV Wheel Bearings Are Bad
• CFMoto OEM vs. Aftermarket Parts: Which Is Better?

Frequently Asked Questions

What is the OEM part number for this CFMoto Rear CV Axle Shaft, Left?

The genuine CFMoto part number is 9060-280100-30000. Use it to match this part to your factory parts diagram.

Which CFMoto models does part #9060-280100-30000 fit?

It fits the ZForce 600 (2012–2015).

Is this a genuine CFMoto part?

Yes. This is a genuine CFMOTO OEM part, the same part number used by CFMoto at the factory, not an aftermarket copy.

Do I need a new axle nut?

Many CFMoto axle nuts are designed for one use. Check the parts diagram and replace the nut and cotter pin if specified.

Can I replace just the CV boot?

If the joint is not clicking and the grease is clean, a boot kit can work. If dirt or water got in, replacing the axle is usually the better choice.

Is OEM as strong as a heavy-duty aftermarket axle?

It is built to CFMoto's factory standard for stock machines. If you run much larger tires or a lift, a heavy-duty axle may be worth considering.

About Availability of Part #9060-280100-30000

CFMoto has marked this part as no longer available. It may have been replaced by a newer part number. Contact our customer service team with your VIN and we will help you find the current replacement, or read more about parts that are no longer available.

Where to Ride Your CFMoto

Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.

• Paiute ATV Trail — central Utah: 250 miles of marked trail linking to 2,000+ more
• St. Anthony Sand Dunes — St. Anthony, Idaho: 10,600 acres of dunes