Genuine Indian Rear Fender Bronze Washers — OEM Part #2881186-687
Brackets and mounts hold your Indian together. The genuine Indian Rear Fender Bronze Washers (part #2881186-687) uses the factory geometry of the Indian Scout, Scout Sixty and Scout Bobber.
Frames, cradles, struts and brackets hold the engine and bodywork in place. Exact geometry keeps everything aligned and vibration-free. This part is confirmed for 3 Indian models from 2015 to 2019. See the full fitment list below.
Availability note: This part is listed as discontinued or no longer available, and stock may be limited. See what to do when a part is no longer available or contact us for help finding a replacement.
Indian Rear Fender Bronze Washers at a Glance
-
OEM part number: 2881186-687
-
Brand: Indian Motorcycle (genuine OEM part)
-
Part type: Fender Mount
-
Fits: Indian Scout models, 2015–2019
-
Condition: New
Indian Models and Years This Rear Fender Bronze Washers Fits
Genuine Indian part #2881186-687 fits the models and years below. To be certain, match the part number to the factory parts diagram for your bike, or contact us with your VIN before ordering.
Indian Scout Fitment
| Model |
Model Years |
| Indian Scout |
2015–2019 |
| Indian Scout Sixty |
2016–2019 |
| Indian Scout Bobber |
2018–2019 |
Why Choose a Genuine Indian OEM Rear Fender Bronze Washers?
- Exact factory geometry and mounting points
- Holds parts steady against vibration
- Matches the bike's finish
- Bolts on with factory hardware
- Made to the same specifications as the part installed at the factory, not an aftermarket copy
- Sold by Witchdoctors, an Indian Motorcycle OEM parts source with factory part numbers and diagrams for every listing
Every Indian, from the Chief and Chieftain to the Challenger, Scout and FTR, is engineered as a complete system. Genuine OEM parts keep your bike correct, reliable and easier to sell. Learn more in our Indian motorcycle parts guide.
Features and Materials
Key Features
- Genuine Indian Motorcycle OEM part #2881186-687
- Factory hole spacing and dimensions
- Durable powder-coat, chrome or plated finish
- Direct replacement for the listed models
Materials and Construction
Indian frame parts and brackets are formed or cast steel and aluminum with powder-coat, chrome or plated finishes and rubber isolators where needed.
Common Reasons Riders Replace This Part
- Replacing bent mounts after a tip-over
- Fixing cracked brackets
- Restoring the license plate or light mount
- Rebuilding after a crash
Signs Your Rear Fender Bronze Washers Needs Replacing
- Bent or cracked bracket
- Parts out of alignment
- Vibration from a loose mount
- Rust on the finish
Installation Tips
- Support the bike and any parts held by the mount.
- Remove the old part and keep the hardware.
- Install the new part loosely and align it.
- Torque fasteners to spec.
- Check for clearance and vibration.
Not sure whether to do it yourself? Read when to seek professional help or DIY before you start.
Indian Parts Diagrams for This Part
Find part #2881186-687 in the factory Indian parts diagrams for your bike. Open the diagrams for your model and year to see exactly where it goes and which parts install with it:
Related Indian OEM Parts
Doing the job right? These genuine Indian parts fit the same bikes and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Rear Fender Bronze Washers with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Matching a color? See our Indian factory paint codes.
Frequently Asked Questions
What is the OEM part number for this Indian Rear Fender Bronze Washers?
The genuine Indian Motorcycle part number is 2881186-687. Use it to match this part to your factory parts diagram.
Which Indian models does part #2881186-687 fit?
It fits the Indian Scout (2015–2019); Indian Scout Sixty (2016–2019); Indian Scout Bobber (2018–2019).
Is this a genuine Indian Motorcycle part?
Yes. This is a genuine Indian Motorcycle OEM part, the same part number used at the factory, not an aftermarket copy.
How do I make sure this fits my bike?
Match part #2881186-687 to the parts diagram for your model and year, or send us your VIN and we will confirm it for you.
Does this include hardware?
Check the parts diagram for hardware sold separately.
Can a bent bracket be straightened?
Replacement is safer for structural parts.
Does a replacement frame need registering?
Replacement frames may need to be registered with your state.
Order Your Genuine Indian Rear Fender Bronze Washers Today
Ride with confidence on parts made for your bike. Order the genuine Indian Rear Fender Bronze Washers, OEM part #2881186-687, from Witchdoctors today and keep your Indian Scout, Scout Sixty and Scout Bobber running the way Indian designed it.
Where to Ride Your Indian
Your Indian was built for the open road. These scenic routes are favorites with motorcycle riders. Check current road conditions, seasonal closures and park fees before you go.