Genuine Polaris Driveline Heat Shield Bracket — OEM Part #5276308
A rattling heat shield or leaking exhaust can cook nearby parts and wiring. The genuine Polaris Driveline Heat Shield Bracket restores the factory exhaust and heat protection on your Ranger Xd, with the right fit, clearances and mounting.
The exhaust routes hot gas away from the engine, controls noise and keeps heat away from panels, wiring and riders. Loose shields and leaks lead to melted parts and failed inspections. This part is confirmed for 9 Polaris models from 2024 to 2026. See the full fitment list below.
Driveline Heat Shield Bracket at a Glance
-
OEM part number: 5276308
-
Brand: Polaris (genuine factory part)
-
Part type: Heat Barrier
-
Fits: Ranger utility side-by-side models, 2024–2026
-
Condition: New
Polaris Models and Years This Driveline Heat Shield Bracket Fits
Genuine Polaris part #5276308 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Polaris Ranger utility side-by-side Fitment
| Model |
Model Years |
| Polaris Ranger Xd 1500 Northstar |
2024–2026 |
| Polaris Ranger Xd 1500 Northstar Crew |
2024–2026 |
| Polaris Ranger Xd 1500 Northstar Mountaineer Edition |
2026 |
| Polaris Ranger Xd 1500 Northstar Mountaineer Edition Crew |
2026 |
| Polaris Ranger Xd 1500 Northstar Ultimate |
2024–2026 |
| Polaris Ranger Xd 1500 Northstar Ultimate Crew |
2024–2026 |
| Polaris Ranger Xd 1500 Northstar Ultimate Crew Texas Edition |
2026 |
| Polaris Ranger Xd 1500 Premium |
2024 |
| Polaris Ranger Xd 1500 Premium Crew |
2024 |
Why Choose a Genuine Polaris OEM Driveline Heat Shield Bracket?
- Factory fit and clearances
- Keeps noise at factory levels for trail rules
- Protects plastics, wiring and riders from heat
- Uses the original hangers, gaskets and hardware
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Polaris model we support
Features and Materials
Key Features
- Genuine Polaris OEM exhaust part, part #5276308
- Original mounting points and pipe routing
- High-temperature materials and finishes
- Designed for the listed Polaris engines
- Pairs with OEM gaskets and hardware on the same diagram
Materials and Construction
Polaris exhaust parts are heat-resistant steel or stainless steel. Heat shields use stamped steel, aluminum or insulated layers, and gaskets use graphite or multi-layer steel to seal at high temperature.
Common Reasons Riders Replace This Part
- Fixing rattles from loose or broken heat shields
- Repairing exhaust leaks at joints
- Replacing a damaged muffler or spark arrestor
- Meeting trail noise and spark arrestor rules
Signs Your Driveline Heat Shield Bracket Needs Replacing
- Rattling or buzzing from the exhaust area
- Ticking or puffing from a leak
- Melted or discolored plastics near the exhaust
- Soot around joints and gaskets
- A damaged, clogged or missing spark arrestor
Installation Tips
- Let the exhaust cool completely.
- Spray hardware with penetrating oil, since exhaust bolts often seize.
- Replace gaskets at every joint you open.
- Fit with hardware loose, align for clearance, then tighten to spec.
- Run the engine and check for leaks, rattles and clearance to plastics.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Polaris Parts Diagrams for Your Machine
Find part #5276308 and every part installed with it in the factory Polaris parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Polaris parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Driveline Heat Shield Bracket with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Polaris Driveline Heat Shield Bracket?
The genuine Polaris part number is 5276308. Use it to match this part to your factory parts diagram.
Which Polaris models does part #5276308 fit?
It fits 9 Polaris Ranger models from 2024 to 2026. The complete list is in the fitment tables above.
Is this a genuine Polaris part?
Yes. This is a genuine Polaris OEM part, the same part number used at the factory, not an aftermarket copy.
Do I need a spark arrestor?
Most public trails require a working, approved spark arrestor. Check local rules.
Will an aftermarket exhaust add horsepower?
Sometimes a little, but often mostly noise, and it may need a tune. OEM keeps factory noise and performance.
Should I reuse exhaust gaskets?
No. They crush when tightened and rarely reseal.
Order Your Genuine Polaris Driveline Heat Shield Bracket Today
Get your Ranger Xd back to factory condition. Add the genuine Polaris Driveline Heat Shield Bracket (part #5276308) to your cart today, and order the related parts above at the same time so you can finish the job in one go.
Where to Ride Your Polaris
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.