Genuine Can-Am Rear Hose, Right — OEM Part #705601577
Nothing matters more on a steep descent than brakes you can trust. The genuine Can-Am Rear Hose, Right restores factory braking on your Outlander models, matching the original fittings, dimensions and hydraulic specification.
Lines, calipers, master cylinders, pads, rotors and parking brakes work as one hydraulic and mechanical system. A leak, worn part or wrong fitting leads to a soft pedal or brake failure. This part is confirmed for 17 Can-Am models from 2018 to 2022. See the full fitment list below.
Rear Hose, Right at a Glance
-
OEM part number: 705601577
-
Brand: Can-Am by BRP (genuine factory part)
-
Part type: Brake Lines & Fittings
-
Position: Right
-
Note: Includes 85 to 85a
-
Fits: Outlander ATV models, 2018–2022
-
Condition: New
Can-Am Models and Years This Rear Hose Fits
Genuine Can-Am part #705601577 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Can-Am Outlander ATV Fitment
| Model |
Model Years |
| Can-Am Outlander MAX 4x4 DPS 570 EFI (International) |
2018 |
| Can-Am Outlander MAX 4x4 XT 570 EFI (International) |
2018 |
| Can-Am Outlander MAX 4x4 XT 650 EFI (International) |
2018 |
| Can-Am Outlander MAX 4x4 XT P 650 EFI (International) |
2018 |
| Can-Am Outlander MAX 4x4 XT P 1000R (International) |
2018 |
| Can-Am Outlander MAX 450 EFI (International) |
2019 |
| Can-Am Outlander MAX 450 EFI DPS (International) |
2020–2022 |
| Can-Am Outlander MAX 570 EFI DPS (International) |
2019–2022 |
| Can-Am Outlander MAX 570 EFI XT (International) |
2019–2022 |
| Can-Am Outlander MAX 650 EFI (International) |
2019 |
| Can-Am Outlander MAX 650 EFI XT (International) |
2021–2022 |
| Can-Am Outlander MAX 650 EFI XT P (International) |
2021–2022 |
| Can-Am Outlander MAX 650 EFI Xu+ (International) |
2021 |
| Can-Am Outlander MAX EFI (International) |
2019 |
| Can-Am Outlander MAX EFI DPS (International) |
2021–2022 |
| Can-Am Outlander MAX EFI XT P (International) |
2020–2022 |
| Can-Am Outlander MAX EFI Xu+ (International) |
2021 |
Why Choose a Genuine Can-Am OEM Rear Hose?
- Factory hydraulic specification for proper feel
- Direct fit with original calipers, lines and mounts
- Built for the heat and contamination of off-road braking
- Restores safe, predictable stopping
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Can-Am model we support
Features and Materials
Key Features
- Genuine Can-Am OEM brake part, part #705601577
- Original fittings, banjo bolts and mounting points
- Built to BRP's brake system specification
- Designed for mud, water and steep terrain
- Works with the DOT fluid specified in your manual
Materials and Construction
Can-Am brake parts use reinforced brake hose, steel lines and fittings, aluminum caliper and master-cylinder bodies with DOT-compatible seals, and steel rotors and friction pads designed for off-road use.
Common Reasons Riders Replace This Part
- Fixing a soft, spongy or sinking pedal
- Replacing leaking lines, calipers or master cylinders
- Replacing worn pads and rotors
- Restoring a parking brake that will not hold
Signs Your Rear Hose Needs Replacing
- Spongy pedal or lever, or one that sinks
- Brake fluid leaks
- Grinding, squealing or pulling to one side
- Scored, warped or thin rotors
- A parking brake that will not hold on a slope
Installation Tips
- Use the Can-Am parts diagram to confirm fittings, crush washers and routing.
- Protect painted surfaces from fluid and cap open lines.
- Install with new crush washers on banjo fittings and torque to spec.
- Refill with fresh DOT fluid of the specified type and bleed fully.
- Test brake feel and function at low speed before riding normally.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Related OEM Parts for the Same Machines
Doing the job right? These genuine Can-Am parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Rear Hose with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Can-Am Rear Hose?
The genuine Can-Am part number is 705601577. Use it to match this part to your factory parts diagram. Note: includes 85 to 85a.
Which Can-Am models does part #705601577 fit?
It fits 17 Can-Am Outlander models from 2018 to 2022. The complete list is in the fitment tables above.
Is this a genuine Can-Am part?
Yes. This is a genuine Can-Am OEM part from BRP, the same part number used at the factory, not an aftermarket copy.
What brake fluid should I use?
Use the DOT type in your Can-Am operator's guide or on the reservoir cap. Never mix DOT 5 silicone with DOT 3, 4 or 5.1.
Do I need to bleed the brakes?
Yes, any time the hydraulic system is opened.
Should I replace rotors with pads?
Not always. Measure thickness and check for scoring or warping against the minimum spec.
Order Your Genuine Can-Am Rear Hose Today
Get your Outlander models back to factory condition. Add the genuine Can-Am Rear Hose, Right (part #705601577) to your cart today, and order the related parts above at the same time so you can finish the job in one go.
Where to Ride Your Can-Am
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.