Genuine Can-Am Swing Arm, Right — OEM Part #706003646
Worn suspension parts turn a smooth ride into a punishing one and make handling unpredictable. The genuine Can-Am Swing Arm, Right restores the factory geometry, travel and ride quality of your Outlander 1000R or Renegade 1000R.
A-arms, trailing arms, shocks, springs, sway bars, knuckles and bushings control wheel movement and alignment. Bent or worn parts cause wandering, uneven tire wear and harsh handling. This part is confirmed for 2 Can-Am models from 2020. See the full fitment list below.
Swing Arm, Right at a Glance
-
OEM part number: 706003646
-
Brand: Can-Am by BRP (genuine factory part)
-
Part type: Swingarm
-
Position: Right
-
Note: Includes 20 to 20a
-
Fits: Outlander ATV and Renegade sport ATV models, 2020
-
Condition: New
Can-Am Models and Years This Swing Arm Fits
Genuine Can-Am part #706003646 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Can-Am Outlander ATV Fitment
| Model |
Model Years |
| Can-Am Outlander 1000R EFI X mr |
2020 |
Can-Am Renegade sport ATV Fitment
| Model |
Model Years |
| Can-Am Renegade 1000R EFI X mr |
2020 |
Why Choose a Genuine Can-Am OEM Swing Arm?
- Factory geometry for straight tracking
- Correct bushing and ball joint fit
- Restores original ride height and travel
- Spreads loads across the frame as BRP designed
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Can-Am model we support
Features and Materials
Key Features
- Genuine Can-Am OEM suspension part, part #706003646
- Original mounting points and dimensions
- Corrosion-resistant coating where applicable
- Built for full-travel off-road use
- Works with factory bushings, ball joints and hardware
Materials and Construction
Can-Am suspension parts use high-strength steel for arms, knuckles and links with corrosion-resistant coatings, rubber or polymer bushings, and shocks with steel bodies, chromed shafts and oil or nitrogen damping.
Common Reasons Riders Replace This Part
- Replacing bent arms, knuckles or links after an impact
- Fixing clunks and wandering from worn bushings
- Restoring ride height and damping
- Rebuilding the suspension on a high-hour machine
Signs Your Swing Arm Needs Replacing
- Clunking or knocking over bumps
- Wandering, pulling or loose handling
- Uneven or rapid tire wear
- Visible bends, cracks or leaking shocks
- Play in ball joints or bushings
Installation Tips
- Support the machine safely with the suspension unloaded.
- Check the Can-Am parts diagram for bushings, ball joints and hardware.
- Remove the damaged part and inspect the frame mounts.
- Install, tightening pivot bolts at ride height if the manual specifies.
- Torque all hardware, set toe, and recheck after the first ride.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Can-Am Parts Diagrams for Your Machine
Find part #706003646 and every part installed with it in the factory Can-Am parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Can-Am parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Swing Arm with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Can-Am Swing Arm?
The genuine Can-Am part number is 706003646. Use it to match this part to your factory parts diagram. Note: includes 20 to 20a.
Which Can-Am models does part #706003646 fit?
It fits the Outlander 1000R EFI X mr (2020); Renegade 1000R EFI X mr (2020).
Is this a genuine Can-Am part?
Yes. This is a genuine Can-Am OEM part from BRP, the same part number used at the factory, not an aftermarket copy.
Do I need an alignment after replacing suspension parts?
Yes, check and set toe after installation.
Should I replace both sides?
For wear items like bushings and shocks, replace in pairs to keep handling balanced.
Is OEM better than aftermarket suspension?
OEM restores factory ride and geometry. Aftermarket arms may add strength or travel but often change geometry.
Order Your Genuine Can-Am Swing Arm Today
Get your Outlander 1000R or Renegade 1000R back to factory condition. Add the genuine Can-Am Swing Arm, Right (part #706003646) to your cart today, and order the related parts above at the same time so you can finish the job in one go.
Where to Ride Your Can-Am
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.