Genuine Can-Am Upper Support, Right — OEM Part #708305280
Keep your Commander 800R or Commander 1000R working with a genuine Can-Am Upper Support, Right. This OEM part is built to BRP's original specification, so it works with the factory bed, rack or hitch without guesswork.
Beds, racks, storage bins and hitch parts carry real weight over rough ground. Worn latches, cracked bins and bent brackets make loads unsafe and let water ruin what you carry. This part is confirmed for 4 Can-Am models from 2018 to 2020. See the full fitment list below.
Upper Support, Right at a Glance
-
OEM part number: 708305280
-
Brand: Can-Am by BRP (genuine factory part)
-
Part type: Tailgates & Components
-
Position: Right
-
Fits: Commander crossover side-by-side models, 2018–2020
-
Condition: New
Can-Am Models and Years This Upper Support Fits
Genuine Can-Am part #708305280 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Can-Am Commander crossover side-by-side Fitment
| Model |
Model Years |
| Can-Am Commander 800R EFI |
2018–2020 |
| Can-Am Commander 1000R EFI |
2018–2020 |
| Can-Am Commander MAX 800R EFI |
2018–2020 |
| Can-Am Commander MAX 1000R EFI |
2018–2020 |
Why Choose a Genuine Can-Am OEM Upper Support?
- Factory fit with the original bed, rack, box or frame
- Restores secure latching and load retention
- Keeps stored gear protected from water and dust
- Built for the rated cargo and towing use of the listed models
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Can-Am model we support
Features and Materials
Key Features
- Genuine Can-Am OEM part, part #708305280
- Original mounting points and hardware
- Made for the vibration and loads of work and trail use
- Corrosion-resistant finish or UV-stable plastic, depending on the part
- Works with factory latches, struts and LinQ accessories where equipped
Materials and Construction
Can-Am cargo and storage parts use high-strength steel for load-bearing brackets, racks and hitch parts, and impact-resistant, UV-stabilized plastics for boxes, bins and lids. Rubber seals help keep moisture out.
Common Reasons Riders Replace This Part
- Hauling tools, feed, firewood and equipment
- Towing within the rated limits for your model
- Keeping gear dry in factory storage
- Repairing a bed, tailgate or box after damage
Signs Your Upper Support Needs Replacing
- Tailgates or lids that will not stay latched
- Cracked bins, boxes or bed panels
- Bent or broken rack and hitch brackets
- Torn or missing seals that let water in
- Dump-bed latches or struts that no longer hold
Installation Tips
- Empty the bed or compartment and support lids or beds before removing parts.
- Use the Can-Am parts diagram to identify fasteners and linkage.
- Remove the worn part and inspect nearby hinges, latches and brackets.
- Install with hardware finger-tight, check alignment, then torque to spec.
- Test latches, hinges and load security before carrying a full load.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Can-Am Parts Diagrams for Your Machine
Find part #708305280 and every part installed with it in the factory Can-Am parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Can-Am parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Upper Support with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Can-Am Upper Support?
The genuine Can-Am part number is 708305280. Use it to match this part to your factory parts diagram.
Which Can-Am models does part #708305280 fit?
It fits the Commander 800R EFI (2018–2020); Commander 1000R EFI (2018–2020); Commander MAX 800R EFI (2018–2020); Commander MAX 1000R EFI (2018–2020).
Is this a genuine Can-Am part?
Yes. This is a genuine Can-Am OEM part from BRP, the same part number used at the factory, not an aftermarket copy.
Does this change my cargo or towing capacity?
No. Capacities are set by BRP for your model. This part restores factory function only.
Will it fit aftermarket racks or accessories?
It is designed for the factory Can-Am setup on the listed models. Aftermarket accessories may need their own hardware.
Should I replace the latch hardware too?
If the latch, striker or hinge is worn, replace it at the same time so the new part closes and holds properly.
Order Your Genuine Can-Am Upper Support Today
Ride with confidence on parts built for your machine. Order the genuine Can-Am Upper Support, Right, OEM part #708305280, from Witchdoctors today and keep your Commander 800R or Commander 1000R running the way BRP designed it.
Where to Ride Your Can-Am
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.