Indian Headlight Ring Rubber 5419152

Genuine Indian Headlight Ring Rubber — OEM Part #5419152

Be seen and stay road-legal with the genuine Indian Headlight Ring Rubber, part #5419152. It is the factory lighting part for the Indian Scout Bobber and Scout Bobber 125th Anniversary Edition.

Lighting keeps you seen and lets you see. Headlights, turn signals and brake lights must work and fit correctly to keep you safe and road-legal. This part is confirmed for 2 Indian models from 2025 to 2026. See the full fitment list below.

Indian Headlight Ring Rubber at a Glance

• OEM part number: 5419152
• Brand: Indian Motorcycle (genuine OEM part)
• Part type: Headlight Components
• Fits: Indian Scout models, 2025–2026
• Condition: New

Indian Models and Years This Headlight Ring Rubber Fits

Genuine Indian part #5419152 fits the models and years below. To be certain, match the part number to the factory parts diagram for your bike, or contact us with your VIN before ordering.

Indian Scout Fitment

Why Choose a Genuine Indian OEM Headlight Ring Rubber?

• Factory fit, beam pattern and brightness
• Plug-in connectors with no wire splicing
• DOT-compliant lighting for road use
• Matches the look of your other lights
• Made to the same specifications as the part installed at the factory, not an aftermarket copy
• Sold by Witchdoctors, an Indian Motorcycle OEM parts source with factory part numbers and diagrams for every listing

Every Indian, from the Chief and Chieftain to the Challenger, Scout and FTR, is engineered as a complete system. Genuine OEM parts keep your bike correct, reliable and easier to sell. Learn more in our Indian motorcycle parts guide.

Features and Materials

Key Features

• Genuine Indian Motorcycle OEM part #5419152
• Factory mounts and connectors
• Weather-sealed housing
• Direct replacement for the listed models

Materials and Construction

Indian lighting parts use polycarbonate lenses, chrome or painted housings, steel brackets and sealed electrical connectors.

Common Reasons Riders Replace This Part

• Replacing a broken lens or housing
• Fixing a dead turn signal or brake light
• Replacing lights after a tip-over
• Restoring stock lighting after a custom setup

Signs Your Headlight Ring Rubber Needs Replacing

• Cracked or foggy lenses
• Flickering or dead lights
• Water inside the housing
• Loose or broken mounts

Installation Tips

1. Turn off the ignition and disconnect the battery.
2. Remove the old part and note the wire routing.
3. Apply dielectric grease to the connector and plug in the new part.
4. Mount the part and tighten hardware evenly.
5. Reconnect the battery and test all lights and signals.

Not sure whether to do it yourself? Read when to seek professional help or DIY before you start.

Indian Parts Diagrams for This Part

Browse all Indian motorcycle parts diagrams to find part #5419152 for your model.

Related Indian OEM Parts

Doing the job right? These genuine Indian parts fit the same bikes and are often replaced at the same time:

• Indian Flanged Bushing 8.5X12.7X20 (#5144925)
• Indian Headlight Isolator (#5418379)
• Indian Headlight Spring Clip (#5341622)
• Indian Headlight Ring Bob (#5264064-658)

Recommended Accessories and Maintenance Supplies

Pair your Headlight Ring Rubber with these parts and supplies:

• Indian headlights and turn signals — LED headlights and signals
• Custom Dynamics LED lighting — LED turn signals, brake lights and accent lighting
• BS Battery for Indian — Sealed AGM and lithium batteries
• Indian stators and regulators — Stators, rectifiers, regulators and sensors
• Indian OEM parts diagrams — find every factory part for your model

Helpful Guides from the Witchdoctors Blog

• Can You Ride a Motorcycle in The Rain?
• Tips for Riding Your Motorcycle in the Fall.
• Beware of Victory & Indian Motorcycle Parts Scams on Facebook!
• Tips on Planning Your 2025 Spring and Summer Motorcycle Adventure

Frequently Asked Questions

What is the OEM part number for this Indian Headlight Ring Rubber?

The genuine Indian Motorcycle part number is 5419152. Use it to match this part to your factory parts diagram.

Which Indian models does part #5419152 fit?

It fits the Indian Scout Bobber (2025–2026); Indian Scout Bobber 125th Anniversary Edition (2026).

Is this a genuine Indian Motorcycle part?

Yes. This is a genuine Indian Motorcycle OEM part, the same part number used at the factory, not an aftermarket copy.

How do I make sure this fits my bike?

Match part #5419152 to the parts diagram for your model and year, or send us your VIN and we will confirm it for you.

Will aftermarket LED signals work?

Some models need load resistors or a module setting to prevent fast flashing. OEM parts work with the factory system.

Is this light DOT compliant?

Genuine OEM lighting meets the factory standard for the listed models.

Do I need to aim my headlight?

Yes. Check the aim after replacing headlight parts.

Order Your Genuine Indian Headlight Ring Rubber Today

Ride with confidence on parts made for your bike. Order the genuine Indian Headlight Ring Rubber, OEM part #5419152, from Witchdoctors today and keep your Indian Scout Bobber and Scout Bobber 125th Anniversary Edition running the way Indian designed it.

• How long will it take to receive my order?
• Shipping and return policy
• Questions about fitment? Contact us
• Shop all Indian OEM parts

Where to Ride Your Indian

Your Indian was built for the open road. These scenic routes are favorites with motorcycle riders. Check current road conditions, seasonal closures and park fees before you go.

• Peak to Peak Scenic Byway — Front Range, Colorado: 55 miles of Rocky Mountain views
• Talimena National Scenic Byway — Oklahoma and Arkansas: 54 miles of ridge-top riding