Ring, Retaining by Polaris 7710529 Retaining Ring
The Retaining Ring by Polaris is a black circular snap ring with two small holes at the ends, commonly used as a Polaris OEM retaining ring for replacing Victory, Indian, or Polaris drivetrain snap rings in mechanical assemblies.
The Retaining Ring by Polaris is a black, circular OEM part with two end holes, ideal for securing components on a shaft or bore—perfect snap ring replacement for Victory, Indian, and Polaris drivetrain systems.
An Image of the Geniune Polaris Logo reading 'GENUINE OEM PART' 7710529
Four Polaris off-road vehicles displayed with the Polaris logo above them on a white background.
Ring, Retaining by Polaris 7710529 Retaining Ring
The Retaining Ring by Polaris is a black circular snap ring with two small holes at the ends, commonly used as a Polaris OEM retaining ring for replacing Victory, Indian, or Polaris drivetrain snap rings in mechanical assemblies.
The Retaining Ring by Polaris is a black, circular OEM part with two end holes, ideal for securing components on a shaft or bore—perfect snap ring replacement for Victory, Indian, and Polaris drivetrain systems.
An Image of the Geniune Polaris Logo reading 'GENUINE OEM PART' 7710529
Four Polaris off-road vehicles displayed with the Polaris logo above them on a white background.
Badge

Victory Retaining Ring 7710529

$34.99 USD
Normally Ships in 5-7 Business Days

Inventory:

Loading..
SKU: 7710529
In stock and ready for shipping

Features:

  • Sold Each

SKU: 7710529

Genuine Victory Fork Preload Spacer — OEM Part #7556496

A smooth front end makes every mile better. The genuine Victory Fork Preload Spacer (part #7556496) brings the Victory Vision and Vision Tour back to factory steering and damping.

Forks and triple trees handle steering, braking loads and bumps. Worn seals, springs or bearings cause leaks, wobble and poor handling. This part is confirmed for 2 Victory models from 2009 to 2017. See the full fitment list below.

Victory Fork Preload Spacer at a Glance

  • OEM part number: 7556496
  • Brand: Victory Motorcycles (genuine Polaris OEM part)
  • Part type: Fork Springs
  • Fits: Victory Bagger and Touring models, 2009–2017
  • Condition: New

Victory Models and Years This Fork Preload Spacer Fits

Genuine Victory part #7556496 fits the models and years below. To be certain, match the part number to the factory parts diagram for your bike, or decode your VIN with our Victory VIN decoder before ordering.

Victory Bagger and Touring Fitment

Model Model Years
Victory Vision 2009, 2011–2017
Victory Vision Tour 2009–2010

Also Fits These Indian Motorcycle Models

Polaris shared this part number with select Indian motorcycles: Indian Chief Classic (2014–2018); Indian Chief Dark Horse (2016–2020); Indian Chief Vintage (2014–2020); Indian Chief Vintage Dark Horse 111 (2021); Indian Chief Vintage Dark Horse 116 (2021); Indian Chief Vintage Premium 111 (2021); Indian Chief Vintage Premium 116 (2021); Indian Chieftain (2014–2019); Indian Chieftain 111 (2024–2025); Indian Chieftain 116 (2024); Indian Chieftain Classic (2018–2020); Indian Chieftain Dark Horse (2016–2023); Indian Chieftain Dark Horse 116 (2024–2025); Indian Chieftain Elite (2017–2018, 2020–2023); Indian Chieftain Limited (2017–2019, 2023); Indian Chieftain Limited 116 (2024–2025); Indian Chieftain Premium (2020–2022); Indian Chieftain Standard 111 (2021–2023); Indian Chieftain Standard 116 (2021–2023); Indian Chieftain Standard Thunder Black (2020); Indian Chieftain Standard Titanium Smoke (2020); Indian Elite (2019); Indian Roadmaster (2015–2019, 2021–2023); Indian Roadmaster 116 (2024–2025); Indian Roadmaster Classic (2017–2018); Indian Roadmaster Dark Horse (2020–2023); Indian Roadmaster Dark Horse 116 (2024–2025); Indian Roadmaster Elite (2018–2020); Indian Roadmaster Elite 116 (2024–2025); Indian Roadmaster Limited (2021, 2023); Indian Roadmaster Limited 116 (2024–2025); Indian Roadmaster Premium (2020, 2022); Indian Springfield (2016–2019); Indian Springfield 111 (2021–2025); Indian Springfield 116 (2021–2025); Indian Springfield Dark Horse (2018–2023, 2025); Indian Springfield Dark Horse 116 (2024); Indian Springfield Dark Horse Intl (2021); Indian Springfield Limited (2020); Indian Springfield Special Edition 116 (2025).

Why Choose a Genuine Victory OEM Fork Preload Spacer?

  • Factory spring rate and damping
  • Correct steering geometry and trail
  • Leak-free seals and smooth action
  • Stable handling under braking
  • Made to the same specifications as the part installed at the factory, not an aftermarket copy
  • Sold by Witchdoctors, a Victory OEM parts source with factory part numbers and diagrams for every listing

Victory stopped building motorcycles after the 2017 model year, and many parts are getting harder to find. Genuine OEM parts keep your bike correct, reliable and easier to sell. Read Victory OEM vs aftermarket parts to see the difference.

Features and Materials

Key Features

  • Genuine Polaris/Victory OEM part #7556496
  • Precision-machined to original dimensions
  • Matching chrome or black finish
  • Direct replacement for the listed models

Materials and Construction

Victory front suspension parts use hard-chromed steel fork tubes, cast aluminum sliders and triple clamps, steel springs, and oil-resistant seals and bushings.

Common Reasons Riders Replace This Part

  • Fork seal and bushing service
  • Replacing bent tubes or damaged legs
  • Steering bearing replacement
  • Repairs after a front-end impact

Signs Your Fork Preload Spacer Needs Replacing

  • Oil on the fork tubes or brake
  • Clunking under braking
  • Front end feels soft or bouncy
  • Head shake or notchy steering

Installation Tips

  1. Support the bike securely with the front wheel off the ground.
  2. Remove the wheel, fender and brake calipers as needed.
  3. Install new parts and fill forks with the correct oil and level.
  4. Torque triple clamp and axle pinch bolts to spec.
  5. Pump the forks, check alignment and test-ride carefully.

Not sure whether to do it yourself? Read when to seek professional help or DIY before you start.

Victory Parts Diagrams for This Part

Find part #7556496 in the factory Victory parts diagrams for your bike. Open the diagrams for your model and year to see exactly where it goes and which parts install with it:

Related Victory OEM Parts

Doing the job right? These genuine Victory parts fit the same bikes and are often replaced at the same time:

Recommended Accessories and Maintenance Supplies

Pair your Fork Preload Spacer with these parts and supplies:

Helpful Guides from the Witchdoctors Blog

Frequently Asked Questions

What is the OEM part number for this Victory Fork Preload Spacer?

The genuine Polaris/Victory part number is 7556496. Use it to match this part to your factory parts diagram.

Which Victory models does part #7556496 fit?

It fits the Vision (2009, 2011–2017); Vision Tour (2009–2010).

Is this a genuine Victory part?

Yes. This is a genuine Polaris OEM part for Victory motorcycles, the same part number used at the factory, not an aftermarket copy.

Can I still get parts for my Victory?

Yes. Polaris continues to supply many Victory parts, and Witchdoctors stocks thousands of genuine Victory part numbers. Read where to find Victory parts.

What fork oil does my Victory need?

See our fork oil guide and your service manual for the correct weight and level.

Should I replace seals on both forks?

Yes. Service both legs together for even damping.

Can bent fork tubes be straightened?

Replacement is the safer choice for a road motorcycle.

Order Your Genuine Victory Fork Preload Spacer Today

Ride with confidence on parts made for your bike. Order the genuine Victory Fork Preload Spacer, OEM part #7556496, from Witchdoctors today and keep your Victory Vision and Vision Tour running the way Victory designed it.

Where to Ride Your Victory

Your Victory was built for the open road. These scenic routes are favorites with motorcycle riders. Check current road conditions, seasonal closures and park fees before you go.

General Safety Warning & Installation Requirements

Your safety is our top priority. Whether you are maintaining a Victory® or Indian® Motorcycle, or servicing a UTV, ATV, or Side-by-Side, proper installation is vital to the performance and safety of your vehicle.

Important:
Warning: Failure to follow manufacturer-specified installation procedures and safety requirements can result in mechanical failure, loss of vehicle control, serious injury, or death.

Important Fitment Disclosure

At Witchdoctors, we want to ensure you get back on the road or trail as quickly as possible. Correct fitment is the most critical step in purchasing parts for your Victory® or Indian® Motorcycle. Also for your Polaris®, CFMoto®, Arctic Cat®, Yamaha®, Honda®, Can-Am®, Kawasaki® UTV and ATV.

Verification Required: While we strive for 100% accuracy, vehicle manufacturers often make mid-year production changes. Always verify your specific year, make, and model before finalizing your order.
Read More

Shipping

Qualifying Retail orders $159.99 or more will receive free ground shipping. Free Shipping Terms and conditions.

All orders over $500 will require a signature.

Please see International Shipping page for orders shipping outside the US.

See our full Shipping Policy page for further details.

Product Availability

We show real time product availability. These products normally ship the same business day but may ship from one of our warehouses across the country. If an item requires additional processing time you will be notified.

Returns

If your order arrives and it is not right, we will we'll fix it. We promise!

Doesn't fit or just not happy with it? You can return any new, unopened, unused or unaltered item within 30 business days of delivery receipt of your item. We will issue a refund to your original payment method.

See our full Return Policy for all of the pertinent details.

Found URLs: