Genuine Can-Am Roller Lever — OEM Part #420248747
Get crisp engagement and smooth acceleration back with a genuine Can-Am Roller Lever. Built for the Defender HD11, it matches the original CVT specification, so belt alignment, shift points and cooling airflow stay where they should.
The drive and driven clutches, belt, covers and cooling ducts work as one system. Worn or mismatched parts cause belt slip, harsh engagement, overheating and early belt failure. This part is confirmed for 2 Can-Am models from 2026. See the full fitment list below.
Roller Lever at a Glance
-
OEM part number: 420248747
-
Brand: Can-Am by BRP (genuine factory part)
-
Part type: CVT/Clutch Components
-
Note: 360999352
-
Fits: Defender utility side-by-side models, 2026
-
Condition: New
Can-Am Models and Years This Roller Lever Fits
Genuine Can-Am part #420248747 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Can-Am Defender utility side-by-side Fitment
| Model |
Model Years |
| Can-Am Defender HD11 X mr |
2026 |
| Can-Am Defender MAX HD11 X mr |
2026 |
Why Choose a Genuine Can-Am OEM Roller Lever?
- Factory calibration for engagement, shift-out and backshift
- Correct belt alignment and deflection
- Keeps CVT cooling and sealing at factory standard
- Helps your drive belt last longer
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Can-Am model we support
Features and Materials
Key Features
- Genuine Can-Am OEM CVT part, part #420248747
- Built to BRP's original clutch specifications
- Precision-machined surfaces where applicable
- Designed for the listed Can-Am CVT systems
- Works with OEM belts, covers, seals and ducts
Materials and Construction
Can-Am CVT parts use precision-machined aluminum sheaves and housings, hardened steel shafts and rollers, wear-resistant bushings, and heat-stable plastic or composite covers and ducts sealed against water and dust.
Common Reasons Riders Replace This Part
- Fixing belt slip, jerky engagement or poor top speed
- Replacing worn sheaves, rollers, springs or bushings
- Repairing covers, seals and ducts after water intrusion
- Routine CVT service and belt replacement
Signs Your Roller Lever Needs Replacing
- Belt slipping, squealing or a burning smell
- Jerky, harsh or delayed engagement
- Loss of top speed or acceleration
- Glazed belt or frequent belt failures
- Water or debris inside the CVT cover
Installation Tips
- Remove the CVT cover and clean out belt dust before taking anything apart.
- Use the correct BRP clutch tools; clutches are under spring tension.
- Inspect sheave faces, rollers, bushings and the belt while you are in there.
- Assemble to factory torque specs and check belt deflection and alignment.
- Replace cover seals and follow the belt break-in procedure.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Can-Am Parts Diagrams for Your Machine
Find part #420248747 and every part installed with it in the factory Can-Am parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Can-Am parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Roller Lever with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Can-Am Roller Lever?
The genuine Can-Am part number is 420248747. Use it to match this part to your factory parts diagram. Note: 360999352.
Which Can-Am models does part #420248747 fit?
It fits the Defender HD11 X mr (2026); Defender MAX HD11 X mr (2026).
Is this a genuine Can-Am part?
Yes. This is a genuine Can-Am OEM part from BRP, the same part number used at the factory, not an aftermarket copy.
Should I replace the belt at the same time?
If the belt is glazed, cracked or worn to minimum width, replace it with the clutch parts.
What causes CVT belts to burn up?
Riding in high range at low speed, heavy loads, water in the CVT and worn clutch parts. Use low range for slow, heavy work.
Do I need special tools?
Yes. Most Can-Am clutches need specific holding and puller tools to service safely.
Order Your Genuine Can-Am Roller Lever Today
Ride with confidence on parts built for your machine. Order the genuine Can-Am Roller Lever, OEM part #420248747, from Witchdoctors today and keep your Defender HD11 running the way BRP designed it.
Where to Ride Your Can-Am
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.