Genuine Polaris Screw Soc Head M8x20 — OEM Part #3040228
Skip the hardware-store guesswork. The genuine Polaris Screw Soc Head M8x20 matches the thread pitch, length, strength grade and head style of the original, so it fits your Ranger models the first time and holds under vibration.
OEM hardware is engineered for a specific location and load. The wrong grade, length or thread can strip threads, loosen under vibration or let critical parts shift. This part is confirmed for 11 Polaris models from 2015 to 2018. See the full fitment list below.
Screw Soc Head M8x20 at a Glance
-
OEM part number: 3040228
-
Brand: Polaris (genuine factory part)
-
Part type: OEM Screw
-
Fits: Ranger utility side-by-side models, 2015–2018
-
Condition: New
Polaris Models and Years This Screw Soc Head M8x20 Fits
Genuine Polaris part #3040228 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Polaris Ranger utility side-by-side Fitment
| Model |
Model Years |
| Polaris Ranger 1000 Diesel |
2015–2018 |
| Polaris Ranger 1000 Diesel Poland (International) |
2018 |
| Polaris Ranger Crew 1000 Diesel |
2015–2018 |
| Polaris Ranger Crew 1000 Diesel MD (International) |
2018 |
| Polaris Ranger Crew 1000 Diesel MD Pol (International) |
2017 |
| Polaris Ranger Crew Diesel |
2015 |
| Polaris Ranger Diesel |
2015–2017 |
| Polaris Ranger Diesel Crew Diesel |
2016 |
| Polaris Ranger Diesel Hst |
2015–2017 |
| Polaris Ranger Diesel Intl |
2015–2016, 2018 |
| Polaris Ranger Hst |
2015–2017 |
Why Choose a Genuine Polaris OEM Screw Soc Head M8x20?
- Exact factory size, thread pitch and length
- Correct strength grade for its location
- Factory corrosion-resistant finish
- No guessing at sizes or grades
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Polaris model we support
Features and Materials
Key Features
- Genuine Polaris OEM hardware, part #3040228
- Matches the original thread, length, head style and grade
- Plated or coated to resist corrosion (where applicable)
- Used across several Polaris assemblies, as listed in the fitment table
- Ideal for replacing lost, stripped or one-time-use fasteners
Materials and Construction
Polaris fasteners are heat-treated alloy or carbon steel, or stainless steel where corrosion resistance matters most, with zinc or similar plating. Washers, clips and bushings are steel, spring steel, nylon or rubber depending on the job.
Common Reasons Riders Replace This Part
- Replacing hardware lost on the trail
- Replacing stretched, rusted or stripped fasteners
- Rebuilds that call for new one-time-use hardware
- Keeping spares for common repairs
Signs Your Screw Soc Head M8x20 Needs Replacing
- Rounded heads or damaged threads
- Rust that weakens the fastener
- Missing hardware that leaves a part loose
- Bolts that will not hold torque
- Self-locking nuts or one-time bolts that were already reused
Installation Tips
- Check the Polaris parts diagram for the location and quantity you need.
- Clean the threads in the mating part, chasing damaged threads with a tap if needed.
- Apply thread locker or anti-seize only where the service manual specifies.
- Start the fastener by hand to avoid cross-threading.
- Tighten to the factory torque spec with a calibrated torque wrench.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Polaris Parts Diagrams for Your Machine
Find part #3040228 and every part installed with it in the factory Polaris parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Polaris parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Screw Soc Head M8x20 with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Polaris Screw Soc Head M8x20?
The genuine Polaris part number is 3040228. Use it to match this part to your factory parts diagram.
Which Polaris models does part #3040228 fit?
It fits 11 Polaris Ranger models from 2015 to 2018. The complete list is in the fitment tables above.
Is this a genuine Polaris part?
Yes. This is a genuine Polaris OEM part, the same part number used at the factory, not an aftermarket copy.
Can I use a hardware-store bolt instead?
It may look the same, but grade, pitch, length and finish often differ. For suspension, brakes or engine parts, use the specified OEM fastener.
Is this sold individually?
This listing is for the part number shown. Check the parts diagram for the quantity at each location.
Should I reuse self-locking nuts?
No. Self-locking and torque-to-yield fasteners are designed for one use.
Order Your Genuine Polaris Screw Soc Head M8x20 Today
Ride with confidence on parts built for your machine. Order the genuine Polaris Screw Soc Head M8x20, OEM part #3040228, from Witchdoctors today and keep your Ranger models running the way Polaris designed it.
Where to Ride Your Polaris
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.