Genuine Victory, Indian & Polaris Torx Screw — OEM Part #7519063
Skip the hardware-store guesswork. The genuine Victory, Indian & Polaris Torx Screw matches the original thread pitch, length, strength and finish, so it fits your Victory or Indian motorcycle, or Polaris off-road vehicle the first time and holds under vibration.
OEM hardware is engineered for a specific location and load. The wrong grade, length or finish can strip threads, loosen with vibration or look out of place on a show-quality bike. Because Victory, Indian and Polaris are all Polaris Inc. brands, this part number is shared across Victory motorcycles, Indian motorcycles and Polaris off-road vehicles. Every model it fits is listed below.
Torx Screw at a Glance
-
OEM part number: 7519063
-
Brand: Victory, Indian & Polaris (genuine Polaris-made OEM part)
-
Part type: OEM Screw
-
Victory fitment: Boardwalk, Cross Country, Gunner, Hammer, Highball, Jackpot, Judge, Magnum, Vegas, Vision and X1, 2015–2017
-
Indian fitment: 101 Scout, Chief, Chieftain, Elite, Roadmaster, Scout, Sport Chief, Sport Scout, Springfield and Super Scout, 2016–2025
-
Polaris off-road fitment: ACE, General, RZR, Ranger and Xpedition, 2016–2026
-
Condition: New
Models and Years This Torx Screw Fits
Genuine part #7519063 fits the models and years below, across Victory motorcycles, Indian motorcycles and Polaris off-road vehicles. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Victory Motorcycle Fitment
| Model |
Model Years |
| Victory Boardwalk |
2015 |
| Victory Cross Country |
2015–2017 |
| Victory Cross Country Tour |
2015–2017 |
| Victory Gunner |
2015–2017 |
| Victory Hammer |
2015–2017 |
| Victory Highball |
2015–2017 |
| Victory Jackpot |
2015–2016 |
| Victory Judge |
2016–2017 |
| Victory Magnum |
2015–2017 |
| Victory Vegas |
2015–2017 |
| Victory Vision |
2015–2017 |
| Victory X1 |
2015–2017 |
Indian Motorcycle Fitment
50 Indian model variants share this part, grouped here by model family.
| Model Family |
Model Years |
Variants |
| Indian 101 Scout |
2025 |
1 |
| Indian Chief |
2017–2021 |
7 |
| Indian Chieftain |
2018–2025 |
14 |
| Indian Elite |
2019 |
1 |
| Indian Roadmaster |
2018–2025 |
10 |
| Indian Scout |
2025 |
4 |
| Indian Sport Chief |
2023–2025 |
2 |
| Indian Sport Scout |
2025 |
2 |
| Indian Springfield |
2016–2025 |
8 |
| Indian Super Scout |
2025 |
1 |
Polaris Off-Road Vehicle Fitment
237 Polaris model variants share this part, grouped here by model family.
| Model Family |
Model Years |
Variants |
| Polaris ACE |
2016–2019 |
6 |
| Polaris General |
2016–2026 |
26 |
| Polaris RZR |
2018–2026 |
135 |
| Polaris Ranger |
2017–2026 |
60 |
| Polaris Xpedition |
2024–2026 |
10 |
Yes, a motorcycle part can fit an ATV or side-by-side: Polaris uses many of the same fasteners, seals, filters and electrical parts across its motorcycle and off-road lines, so this part number also appears in the Polaris off-road parts catalog.
Why Choose a Genuine Victory, Indian & Polaris OEM Torx Screw?
- Exact factory size, thread pitch and length
- Correct strength grade for its location
- Factory chrome, black or plated finish
- No guessing at metric sizes
- Sold by Witchdoctors, a Victory and Indian parts specialist since the Victory years
Features and Materials
Key Features
- Genuine Victory, Indian & Polaris OEM hardware, part #7519063
- Matches the original thread, length, head style and grade
- Corrosion-resistant finish
- Used across several Victory assemblies, as listed in the fitment table
- Ideal for replacing lost, stripped or one-time-use fasteners
Materials and Construction
Victory fasteners are heat-treated alloy or carbon steel, or stainless steel where appearance and corrosion resistance matter, with chrome, black oxide or zinc finishes. Grommets, bushings and O-rings are rubber or polymer.
Common Reasons Riders Replace This Part
- Replacing hardware that vibrated loose
- Replacing stripped, rusted or rounded fasteners
- Rebuilds that call for new one-time-use hardware
- Replacing hardened grommets that cause rattles
Signs Your Torx Screw Needs Replacing
- Rounded heads or damaged threads
- Rust or pitted chrome
- Missing hardware or rattling panels
- Cracked or hardened grommets
- Self-locking nuts that were already reused
Installation Tips
- Check the Victory parts diagram for the location and quantity.
- Clean threads in the mating part.
- Use thread locker only where the service manual specifies.
- Start fasteners by hand to avoid cross-threading.
- Torque to the factory spec.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Parts Diagrams for Your Bike
Find part #7519063 and every part installed with it in the factory parts diagrams for your model:
Related OEM Parts for the Same Bikes
Doing the job right? These genuine parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Torx Screw with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Victory, Indian & Polaris Torx Screw?
The genuine part number is 7519063. Use it to match this part to your factory parts diagram.
Which Victory motorcycles does part #7519063 fit?
It fits 12 Victory models (Boardwalk, Cross Country, Gunner, Hammer, Highball, Jackpot, Judge, Magnum, Vegas, Vision and X1) from 2015 to 2017. See the Victory fitment table above.
Does part #7519063 fit Indian motorcycles?
Yes. It fits 50 Indian models (101 Scout, Chief, Chieftain, Elite, Roadmaster, Scout, Sport Chief, Sport Scout, Springfield and Super Scout) from 2016 to 2025. See the Indian fitment table above.
Does it fit Polaris ATVs or side-by-sides?
Yes. The same part number is used on 237 Polaris off-road models, including the ACE, General, RZR, Ranger and Xpedition. See the Polaris table above.
Is this a genuine OEM part?
Yes. This is a genuine Polaris-made OEM part, the same part number used at the factory for Victory, Indian and Polaris models, not an aftermarket copy.
Can I use a hardware-store bolt?
Grade, pitch, length and finish often differ. For brakes, suspension and engine parts, use the specified OEM fastener.
Is this sold individually?
This listing is for the part number shown. Check the diagram for the quantity used.
Does it fit Indian or Polaris models too?
Many Polaris-family fasteners are shared. Check the fitment tables below.
Order Your Genuine Victory, Indian & Polaris Torx Screw Today
Victory parts get harder to find every year. Order the genuine Victory, Indian & Polaris Torx Screw, OEM part #7519063, from Witchdoctors today and keep your Victory or Indian motorcycle, or Polaris off-road vehicle running the way it was built.
Where to Ride Your Victory or Indian
Put fresh parts to work on two of America's great motorcycle roads. Check road conditions, seasonal closures and park rules before you go.