Genuine Can-Am Sealing Ring — OEM Part #420201155
Put power to the ground reliably with a genuine Can-Am Sealing Ring. Built for the Maverick R, it matches the original splines, bearings and housings, so it works with your gearbox and Visco-Lok or Smart-Lok differentials where equipped.
The gearbox, shift mechanism, differentials and drive shafts carry the full torque of the engine. Worn or mismatched parts cause noise, hard shifting and expensive failures. This part is confirmed for 10 Can-Am models from 2026. See the full fitment list below.
Sealing Ring at a Glance
-
OEM part number: 420201155
-
Brand: Can-Am by BRP (genuine factory part)
-
Part type: Transmission Components
-
Fits: Maverick sport side-by-side models, 2026
-
Condition: New
Can-Am Models and Years This Sealing Ring Fits
Genuine Can-Am part #420201155 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Can-Am Maverick sport side-by-side Fitment
| Model |
Model Years |
| Can-Am Maverick R MAX X |
2026 |
| Can-Am Maverick R MAX X rc |
2026 |
| Can-Am Maverick R MAX X rc SAS |
2026 |
| Can-Am Maverick R MAX X rs |
2026 |
| Can-Am Maverick R MAX X rs SAS |
2026 |
| Can-Am Maverick R X |
2026 |
| Can-Am Maverick R X rc |
2026 |
| Can-Am Maverick R X rc SAS |
2026 |
| Can-Am Maverick R X rs |
2026 |
| Can-Am Maverick R X rs SAS |
2026 |
Why Choose a Genuine Can-Am OEM Sealing Ring?
- Exact gear, spline and bearing fit
- Restores smooth, positive shifting and range selection
- Designed for full engine torque and load
- Lowers the risk of repeat failures
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Can-Am model we support
Features and Materials
Key Features
- Genuine Can-Am OEM drivetrain part, part #420201155
- Machined to BRP's original specifications
- Hardened surfaces where applicable
- Matches factory seals, bearings and mounting
- Designed for the listed Can-Am models
Materials and Construction
Can-Am drivetrain parts use heat-treated alloy steel for gears, shafts, forks and splines, sealed bearings, and aluminum or cast housings, with oil- and weather-resistant seals and boots.
Common Reasons Riders Replace This Part
- Fixing grinding, popping out of gear or hard shifting
- Rebuilding gearboxes, gearcases and differentials
- Fixing 4WD or differential-lock engagement problems
- Repairing leaks and vibration from drive shafts and U-joints
Signs Your Sealing Ring Needs Replacing
- Grinding, clunking or whining
- Popping out of gear or trouble selecting range
- Vibration that grows with speed
- Oil leaks at seals, covers or differentials
- 4WD or diff lock that will not engage or release
Installation Tips
- Drain gearbox or differential fluid before disassembly.
- Follow the BRP service manual for shimming, preload and torque specs.
- Replace seals, O-rings and gaskets you disturb.
- Lubricate gears and bearings with the specified fluid during assembly.
- Refill with the correct fluid and amount, then test-ride and check for leaks.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Can-Am Parts Diagrams for Your Machine
Find part #420201155 and every part installed with it in the factory Can-Am parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Can-Am parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Sealing Ring with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Can-Am Sealing Ring?
The genuine Can-Am part number is 420201155. Use it to match this part to your factory parts diagram.
Which Can-Am models does part #420201155 fit?
It fits 10 Can-Am Maverick models from 2026 to 2026. The complete list is in the fitment tables above.
Is this a genuine Can-Am part?
Yes. This is a genuine Can-Am OEM part from BRP, the same part number used at the factory, not an aftermarket copy.
What fluid should I use?
Use the gearbox and differential fluids in your Can-Am operator's guide. The wrong fluid can cause wear and engagement problems.
Should I replace bearings and seals during a rebuild?
Yes. They are inexpensive compared to labor.
Can a bad drivetrain part damage other components?
Yes. Worn parts shed metal into the fluid and damage gears and bearings. Repair problems early.
Order Your Genuine Can-Am Sealing Ring Today
Ride with confidence on parts built for your machine. Order the genuine Can-Am Sealing Ring, OEM part #420201155, from Witchdoctors today and keep your Maverick R running the way BRP designed it.
Where to Ride Your Can-Am
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.