Genuine Polaris Seat Belt Retainer Hook, Right — OEM Part #5466168
Ride safer and more comfortably with a genuine Polaris Seat Belt Retainer Hook, Right. Made for the Xpedition Adv, it matches the factory mounts and works with the original seat, belt and cab systems.
Seats, belts, nets and their mounts keep riders in position over rough ground. Worn or damaged parts reduce comfort and, more importantly, protection. This part is confirmed for 2 Polaris models from 2024. See the full fitment list below.
Seat Belt Retainer Hook, Right at a Glance
-
OEM part number: 5466168
-
Brand: Polaris (genuine factory part)
-
Part type: Safety Belt Repair
-
Position: Right
-
Note: From 11/27/2023 To 2/12/2024
-
Fits: Xpedition adventure side-by-side models, 2024
-
Condition: New
Polaris Models and Years This Seat Belt Retainer Hook Fits
Genuine Polaris part #5466168 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Polaris Xpedition adventure side-by-side Fitment
| Model |
Model Years |
| Polaris Xpedition Adv 5 Northstar |
2024 |
| Polaris Xpedition Adv 5 Ultimate |
2024 |
Why Choose a Genuine Polaris OEM Seat Belt Retainer Hook?
- Factory fit with the original seat base, frame and mounts
- Restores the designed rider support and restraint
- Weather-resistant materials for outdoor use
- Keeps safety systems working as intended
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Polaris model we support
Features and Materials
Key Features
- Genuine Polaris OEM part, part #5466168
- Original mounting points and hardware
- UV- and water-resistant covers and webbing (where applicable)
- Designed for the listed Polaris models
- Works with factory seat latches, belts and interlocks
Materials and Construction
Polaris seating parts use UV-resistant vinyl, foam that resists water absorption, and steel or plastic seat bases. Belts use high-strength polyester webbing with steel latch hardware built to factory specification.
Common Reasons Riders Replace This Part
- Replacing torn or worn seat covers and cushions
- Replacing frayed, cut or sun-damaged belts
- Fixing loose or broken seat mounts and latches
- Restoring a machine for resale
Signs Your Seat Belt Retainer Hook Needs Replacing
- Torn vinyl or waterlogged foam
- Belt webbing that is frayed, cut or faded
- Belts that do not retract or latch
- Seats that rock or will not lock in place
- Broken nets, buckles or mounts
Installation Tips
- Use the Polaris parts diagram to identify hardware and any belt interlock wiring.
- Remove the old part, noting how belts and wiring are routed.
- Install with the correct factory hardware.
- Torque belt anchor bolts to spec; never substitute hardware on restraint anchors.
- Test latches, retractors and interlocks before riding.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Polaris Parts Diagrams for Your Machine
Find part #5466168 and every part installed with it in the factory Polaris parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Polaris parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Seat Belt Retainer Hook with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Polaris Seat Belt Retainer Hook?
The genuine Polaris part number is 5466168. Use it to match this part to your factory parts diagram. Note: From 11/27/2023 To 2/12/2024.
Which Polaris models does part #5466168 fit?
It fits the Xpedition Adv 5 Northstar (2024); Xpedition Adv 5 Ultimate (2024).
Is this a genuine Polaris part?
Yes. This is a genuine Polaris OEM part, the same part number used at the factory, not an aftermarket copy.
Should seat belts be replaced after an accident?
Yes. Belts that restrained a rider in a crash or rollover can be stretched or damaged and should be replaced.
Will this fit an aftermarket seat?
It is designed for the factory Polaris seat and mounts on the listed models.
How do I keep vinyl seats from cracking?
Keep them clean, use a UV protectant made for vinyl, and cover the machine when parked outside.
Order Your Genuine Polaris Seat Belt Retainer Hook Today
Ride with confidence on parts built for your machine. Order the genuine Polaris Seat Belt Retainer Hook, Right, OEM part #5466168, from Witchdoctors today and keep your Xpedition Adv running the way Polaris designed it.
Where to Ride Your Polaris
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.