Genuine CFMoto Seat Bracket — OEM Part #9DQV-030120-3000
Comfort and safety go hand in hand on a long ride. The genuine CFMoto Seat Bracket restores the factory seating and restraint system on your CForce 400 or CForce 500, mounting exactly where the original did so it supports and protects riders as designed.
Seats, belts, nets and their mounts keep riders in position over rough ground. Worn or damaged parts reduce comfort and, more importantly, protection. This part is confirmed for 4 CFMoto models from 2022 to 2025. See the full fitment list below.
Seat Bracket at a Glance
-
OEM part number: 9DQV-030120-3000
-
Brand: CFMOTO (genuine factory part)
-
Part type: Seat Mount
-
Fits: CForce ATV models, 2022–2025
-
Condition: New
CFMoto Models and Years This Seat Bracket Fits
Genuine CFMoto part #9DQV-030120-3000 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
CFMoto CForce ATV Fitment
| Model |
Model Years |
| CFMoto CForce 400 |
2022–2023, 2025 |
| CFMoto CForce 400 S |
2024 |
| CFMoto CForce 500 |
2022–2023 |
| CFMoto CForce 500 S |
2024–2025 |
Why Choose a Genuine CFMoto OEM Seat Bracket?
- Factory fit with the original seat base, frame and mounts
- Restores CFMoto's designed rider support and restraint
- Weather-resistant materials made for outdoor use
- Keeps safety systems working as intended
- Sold by Witchdoctors, a CFMoto OEM parts source with factory part numbers and diagrams for every listing
Features and Materials
Key Features
- Genuine CFMoto OEM part, part #9DQV-030120-3000
- Matches the original mounting points and hardware
- UV- and water-resistant covers and webbing (where applicable)
- Designed for the listed CFMoto models
- Works with factory seat latches, belts and interlocks
Materials and Construction
CFMoto seating parts use UV-resistant marine-grade vinyl, closed-cell foam that resists water absorption, and steel or plastic seat bases. Safety belts use high-strength polyester webbing with steel latch hardware built to factory specification.
Common Reasons Riders Replace This Part
- Replacing torn or worn seat covers and cushions
- Replacing frayed, cut or sun-damaged belts
- Fixing loose or broken seat mounts and latches
- Restoring a machine for resale or a new owner
Signs Your Seat Bracket Needs Replacing
- Torn vinyl or waterlogged foam
- Seat belt webbing that is frayed, cut or faded
- Belts that do not retract or latch properly
- Seats that rock, slide or will not lock in place
- Broken nets, buckles or mounts
Installation Tips
- Use the CFMoto parts diagram to identify mounting hardware and any seat-belt interlock wiring.
- Remove the old part, noting how belts and wiring are routed.
- Install the new part with the correct factory hardware.
- Torque seat-belt anchor bolts to spec; never substitute hardware on restraint anchors.
- Test latches, retractors and interlocks before riding.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
CFMoto Parts Diagrams for This Part
Part #9DQV-030120-3000 appears in these factory CFMoto parts diagrams. Open the diagram for your model to see exactly where it goes and which parts are installed with it:
Other OEM Parts in This Assembly
Doing the job right? These genuine CFMoto parts are installed alongside the Seat Bracket and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Seat Bracket with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this CFMoto Seat Bracket?
The genuine CFMoto part number is 9DQV-030120-3000. Use it to match this part to your factory parts diagram.
Which CFMoto models does part #9DQV-030120-3000 fit?
It fits the CForce 400 (2022–2023, 2025); CForce 400 S (2024); CForce 500 (2022–2023); CForce 500 S (2024–2025).
Is this a genuine CFMoto part?
Yes. This is a genuine CFMOTO OEM part, the same part number used by CFMoto at the factory, not an aftermarket copy.
Should seat belts be replaced after an accident?
Yes. Belts that have restrained a rider in a crash or rollover can be stretched or damaged internally and should be replaced.
Will this fit an aftermarket seat?
It is designed for the factory CFMoto seat and mounts on the listed models. Aftermarket seats may need their own brackets.
How do I keep vinyl seats from cracking?
Keep them clean and use a UV protectant made for vinyl. Covering the machine when parked outside also helps a lot.
Order Your Genuine CFMoto Seat Bracket Today
Get your CForce 400 or CForce 500 back to factory condition. Add the genuine CFMoto Seat Bracket (part #9DQV-030120-3000) to your cart today, and order the related parts above at the same time so you can finish the job in one go.
Where to Ride Your CFMoto
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.