Genuine Polaris Seat Frame Frame — OEM Part #1022256
Ride safer and more comfortably with a genuine Polaris Seat Frame Frame. Made for the General 1000 or General XP, it matches the factory mounts and works with the original seat, belt and cab systems.
Seats, belts, nets and their mounts keep riders in position over rough ground. Worn or damaged parts reduce comfort and, more importantly, protection. This part is confirmed for 79 Polaris models from 2016 to 2026. See the full fitment list below.
Seat Frame Frame at a Glance
-
OEM part number: 1022256
-
Brand: Polaris (genuine factory part)
-
Part type: Seat Mount
-
Fits: General crossover side-by-side models, 2016–2026
-
Condition: New
Polaris Models and Years This Seat Frame Frame Fits
Genuine Polaris part #1022256 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
This part is shared across 79 Polaris model variants, so the table below groups them by model family. Your exact trim is listed in the parts diagrams linked further down.
Polaris General crossover side-by-side Fitment
| Model Family |
Model Years |
Trims |
| Polaris General 1000 |
2016–2026 |
41 |
| Polaris General XP |
2020–2026 |
38 |
Why Choose a Genuine Polaris OEM Seat Frame Frame?
- Factory fit with the original seat base, frame and mounts
- Restores the designed rider support and restraint
- Weather-resistant materials for outdoor use
- Keeps safety systems working as intended
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Polaris model we support
Features and Materials
Key Features
- Genuine Polaris OEM part, part #1022256
- Original mounting points and hardware
- UV- and water-resistant covers and webbing (where applicable)
- Designed for the listed Polaris models
- Works with factory seat latches, belts and interlocks
Materials and Construction
Polaris seating parts use UV-resistant vinyl, foam that resists water absorption, and steel or plastic seat bases. Belts use high-strength polyester webbing with steel latch hardware built to factory specification.
Common Reasons Riders Replace This Part
- Replacing torn or worn seat covers and cushions
- Replacing frayed, cut or sun-damaged belts
- Fixing loose or broken seat mounts and latches
- Restoring a machine for resale
Signs Your Seat Frame Frame Needs Replacing
- Torn vinyl or waterlogged foam
- Belt webbing that is frayed, cut or faded
- Belts that do not retract or latch
- Seats that rock or will not lock in place
- Broken nets, buckles or mounts
Installation Tips
- Use the Polaris parts diagram to identify hardware and any belt interlock wiring.
- Remove the old part, noting how belts and wiring are routed.
- Install with the correct factory hardware.
- Torque belt anchor bolts to spec; never substitute hardware on restraint anchors.
- Test latches, retractors and interlocks before riding.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Polaris Parts Diagrams for Your Machine
Find part #1022256 and every part installed with it in the factory Polaris parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Polaris parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Seat Frame Frame with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Polaris Seat Frame Frame?
The genuine Polaris part number is 1022256. Use it to match this part to your factory parts diagram.
Which Polaris models does part #1022256 fit?
It fits 79 Polaris General models from 2016 to 2026. The complete list is in the fitment tables above.
Is this a genuine Polaris part?
Yes. This is a genuine Polaris OEM part, the same part number used at the factory, not an aftermarket copy.
Should seat belts be replaced after an accident?
Yes. Belts that restrained a rider in a crash or rollover can be stretched or damaged and should be replaced.
Will this fit an aftermarket seat?
It is designed for the factory Polaris seat and mounts on the listed models.
How do I keep vinyl seats from cracking?
Keep them clean, use a UV protectant made for vinyl, and cover the machine when parked outside.
Order Your Genuine Polaris Seat Frame Frame Today
Ride with confidence on parts built for your machine. Order the genuine Polaris Seat Frame Frame, OEM part #1022256, from Witchdoctors today and keep your General 1000 or General XP running the way Polaris designed it.
Where to Ride Your Polaris
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.