Genuine Yamaha Shaft — OEM Part #1XD-E4745-00-00
A rattling heat shield or leaking exhaust can cook nearby parts and wiring. The genuine Yamaha Shaft restores the factory exhaust and heat protection on your Yamaha ATV or side-by-side, with the right fit, clearances and mounting.
The exhaust routes hot gas away from the engine, controls noise and keeps heat away from panels, wiring and riders. Loose shields and leaks lead to melted parts and failed inspections. This part is confirmed for 35 Yamaha models from 2014 to 2026. See the full fitment list below.
Shaft at a Glance
-
OEM part number: 1XD-E4745-00-00
-
Brand: Yamaha (genuine factory part)
-
Part type: OEM Exhaust Mounts & Components
-
Fits: Viking utility side-by-side and Wolverine recreation side-by-side models, 2014–2026
-
Condition: New
Yamaha Models and Years This Shaft Fits
Genuine Yamaha part #1XD-E4745-00-00 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Yamaha Viking utility side-by-side Fitment
| Model |
Model Years |
| Yamaha Viking |
2014–2020 |
| Yamaha Viking 700 |
2014 |
| Yamaha Viking 700 EPS |
2014 |
| Yamaha Viking 700 EPS Hunte |
2014 |
| Yamaha Viking 700 EPS Hunter |
2014 |
| Yamaha Viking 700 EPS SE |
2014 |
| Yamaha Viking 700 Hunter |
2014 |
| Yamaha Viking EPS |
2014–2026 |
| Yamaha Viking EPS Hunter |
2015–2021 |
| Yamaha Viking EPS Hunting |
2022 |
| Yamaha Viking EPS Ranch |
2018–2026 |
| Yamaha Viking EPS Ranch Edition |
2018–2023 |
| Yamaha Viking EPS SE |
2014–2017, 2019 |
| Yamaha Viking EPS Special E |
2016, 2019 |
| Yamaha Viking Hunter |
2015–2016 |
| Yamaha Viking VI |
2015–2016 |
| Yamaha Viking VI 700 EPS |
2015 |
| Yamaha Viking VI EPS |
2015–2025 |
| Yamaha Viking VI EPS Hunter |
2015–2022 |
| Yamaha Viking VI EPS Huntin |
2022 |
| Yamaha Viking VI EPS Ranch |
2016–2025 |
| Yamaha Viking VI EPS Ranch Edition |
2019–2024 |
| Yamaha Viking VI EPS SE |
2015–2017 |
| Yamaha Viking VI EPS Special |
2017 |
| Yamaha Viking VI EPS Special Edition |
2016 |
| Yamaha Viking VI Hunter |
2015–2016 |
Yamaha Wolverine recreation side-by-side Fitment
| Model |
Model Years |
| Yamaha Wolverine |
2016–2018 |
| Yamaha Wolverine EPS |
2017 |
| Yamaha Wolverine EPS Hunter |
2017 |
| Yamaha Wolverine Hunter |
2016–2017 |
| Yamaha Wolverine R |
2016–2018 |
| Yamaha Wolverine R-Spec EPS |
2016–2018 |
| Yamaha Wolverine R-Spec EPS Hunter |
2017 |
| Yamaha Wolverine R-Spec EPS SE |
2017 |
| Yamaha Wolverine R-Spec Hunter |
2016, 2018 |
Why Choose a Genuine Yamaha OEM Shaft?
- Factory fit and clearances
- Keeps noise at factory levels for trail rules
- Protects plastics, wiring and riders from heat
- Uses the original hangers, gaskets and hardware
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Yamaha model we support
Features and Materials
Key Features
- Genuine Yamaha OEM exhaust part, part #1XD-E4745-00-00
- Original mounting points and pipe routing
- High-temperature materials and finishes
- Designed for the listed Yamaha engines
- Pairs with OEM gaskets and hardware on the same diagram
Materials and Construction
Yamaha exhaust parts are heat-resistant steel or stainless steel. Heat shields use stamped steel, aluminum or insulated layers, and gaskets use graphite or multi-layer steel to seal at high temperature.
Common Reasons Riders Replace This Part
- Fixing rattles from loose or broken heat shields
- Repairing exhaust leaks at joints
- Replacing a damaged muffler or spark arrestor
- Meeting trail noise and spark arrestor rules
Signs Your Shaft Needs Replacing
- Rattling or buzzing from the exhaust area
- Ticking or puffing from a leak
- Melted or discolored plastics near the exhaust
- Soot around joints and gaskets
- A damaged, clogged or missing spark arrestor
Installation Tips
- Let the exhaust cool completely.
- Spray hardware with penetrating oil, since exhaust bolts often seize.
- Replace gaskets at every joint you open.
- Fit with hardware loose, align for clearance, then tighten to spec.
- Run the engine and check for leaks, rattles and clearance to plastics.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Yamaha Parts Diagrams for Your Machine
Find part #1XD-E4745-00-00 and every part installed with it in the factory Yamaha parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Yamaha parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Shaft with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Yamaha Shaft?
The genuine Yamaha part number is 1XD-E4745-00-00. Use it to match this part to your factory parts diagram.
Which Yamaha models does part #1XD-E4745-00-00 fit?
It fits 35 Yamaha Viking and Wolverine models from 2014 to 2026. The complete list is in the fitment tables above.
Is this a genuine Yamaha part?
Yes. This is a genuine Yamaha OEM part, the same part number used at the factory, not an aftermarket copy.
Do I need a spark arrestor?
Most public trails require a working, approved spark arrestor. Check local rules.
Will an aftermarket exhaust add horsepower?
Sometimes a little, but often mostly noise, and it may need retuning. OEM keeps factory noise and performance.
Should I reuse exhaust gaskets?
No. They crush when tightened and rarely reseal.
Order Your Genuine Yamaha Shaft Today
Get your Yamaha ATV or side-by-side back to factory condition. Add the genuine Yamaha Shaft (part #1XD-E4745-00-00) to your cart today, and order the related parts above at the same time so you can finish the job in one go.
Where to Ride Your Yamaha
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.