Genuine Yamaha Shift Fork — OEM Part #2MB-E8512-00-00
Put power to the ground reliably with a genuine Yamaha Shift Fork. Built for the Wolverine models, it matches the original splines, bearings and housings, so it works with your transmission, final drives and 4WD system.
The transmission, shift mechanism, differentials and drive shafts carry the full torque of the engine. Worn or mismatched parts cause noise, hard shifting and expensive failures. This part is confirmed for 9 Yamaha models from 2016 to 2018. See the full fitment list below.
Shift Fork at a Glance
-
OEM part number: 2MB-E8512-00-00
-
Brand: Yamaha (genuine factory part)
-
Part type: Shift Fork
-
Fits: Wolverine recreation side-by-side models, 2016–2018
-
Condition: New
Yamaha Models and Years This Shift Fork Fits
Genuine Yamaha part #2MB-E8512-00-00 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Yamaha Wolverine recreation side-by-side Fitment
| Model |
Model Years |
| Yamaha Wolverine |
2016–2018 |
| Yamaha Wolverine EPS |
2017 |
| Yamaha Wolverine EPS Hunter |
2017 |
| Yamaha Wolverine Hunter |
2016–2017 |
| Yamaha Wolverine R |
2016–2018 |
| Yamaha Wolverine R-Spec EPS |
2016–2018 |
| Yamaha Wolverine R-Spec EPS Hunter |
2017 |
| Yamaha Wolverine R-Spec EPS SE |
2016–2017 |
| Yamaha Wolverine R-Spec Hunter |
2016, 2018 |
Why Choose a Genuine Yamaha OEM Shift Fork?
- Exact gear, spline and bearing fit
- Restores smooth, positive shifting and range selection
- Designed for full engine torque and load
- Lowers the risk of repeat failures
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Yamaha model we support
Features and Materials
Key Features
- Genuine Yamaha OEM drivetrain part, part #2MB-E8512-00-00
- Machined to Yamaha's original specifications
- Hardened surfaces where applicable
- Matches factory seals, bearings and mounting
- Designed for the listed Yamaha models
Materials and Construction
Yamaha drivetrain parts use heat-treated alloy steel for gears, shafts, forks and splines, sealed bearings, and aluminum or cast housings, with oil- and weather-resistant seals and boots.
Common Reasons Riders Replace This Part
- Fixing grinding, popping out of gear or hard shifting
- Rebuilding transmissions and front or rear final drives
- Fixing 4WD or differential-lock engagement problems
- Repairing leaks and vibration from drive shafts and U-joints
Signs Your Shift Fork Needs Replacing
- Grinding, clunking or whining
- Popping out of gear or trouble selecting range
- Vibration that grows with speed
- Oil leaks at seals, covers or final drives
- 4WD or diff lock that will not engage or release
Installation Tips
- Drain transmission or final-drive oil before disassembly.
- Follow the Yamaha service manual for shimming, preload and torque specs.
- Replace seals, O-rings and gaskets you disturb.
- Lubricate gears and bearings with the specified oil during assembly.
- Refill with the correct oil and amount, then test-ride and check for leaks.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Yamaha Parts Diagrams for Your Machine
Find part #2MB-E8512-00-00 and every part installed with it in the factory Yamaha parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Yamaha parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Shift Fork with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Yamaha Shift Fork?
The genuine Yamaha part number is 2MB-E8512-00-00. Use it to match this part to your factory parts diagram.
Which Yamaha models does part #2MB-E8512-00-00 fit?
It fits 9 Yamaha Wolverine models from 2016 to 2018. The complete list is in the fitment tables above.
Is this a genuine Yamaha part?
Yes. This is a genuine Yamaha OEM part, the same part number used at the factory, not an aftermarket copy.
What oil should I use?
Use the transmission and final-drive oils in your Yamaha owner's manual. The wrong oil can cause wear and engagement problems.
Should I replace bearings and seals during a rebuild?
Yes. They are inexpensive compared to labor.
Can a bad drivetrain part damage other components?
Yes. Worn parts shed metal into the oil and damage gears and bearings. Repair problems early.
Order Your Genuine Yamaha Shift Fork Today
Ride with confidence on parts built for your machine. Order the genuine Yamaha Shift Fork, OEM part #2MB-E8512-00-00, from Witchdoctors today and keep your Wolverine models running the way Yamaha designed it.
Where to Ride Your Yamaha
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.
-
Hollister Hills SVRA — Hollister, California: a state vehicular recreation area with designated ATV and 4x4 areas
-
Ride Royal Blue — Pioneer, Tennessee: a base camp for the 900+ mile North Cumberland trail network