Genuine CFMoto Shock Seal — OEM Part #30301-080412
Worn suspension parts turn a smooth ride into a punishing one and make handling unpredictable. The genuine CFMoto Shock Seal restores the factory geometry, travel and ride quality of your UForce models.
A-arms, trailing arms, shocks, springs, sway bars, knuckles and bushings control wheel movement and alignment. Bent or worn parts cause wandering, uneven tire wear and harsh handling. This part is confirmed for 8 CFMoto models from 2021 to 2025. See the full fitment list below.
Shock Seal at a Glance
-
OEM part number: 30301-080412
-
Brand: CFMOTO (genuine factory part)
-
Part type: Shock Seal
-
Fits: UForce utility UTV models, 2021–2025
-
Condition: New
CFMoto Models and Years This Shock Seal Fits
Genuine CFMoto part #30301-080412 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
CFMoto UForce utility UTV Fitment
| Model |
Model Years |
| CFMoto UForce 600 |
2021–2025 |
| CFMoto UForce 800 XL |
2025 |
| CFMoto UForce 1000 |
2023–2025 |
| CFMoto UForce 1000 XL |
2023, 2025 |
| CFMoto UForce U10 Pro |
2025 |
| CFMoto UForce U10 Pro Highland |
2025 |
| CFMoto UForce U10XL Pro |
2025 |
| CFMoto UForce U10XL Pro Highland |
2025 |
Why Choose a Genuine CFMoto OEM Shock Seal?
- Factory geometry for straight tracking and predictable handling
- Correct bushing and ball joint fit
- Restores original ride height and travel
- Spreads loads across the frame as CFMoto designed
- Sold by Witchdoctors, a CFMoto OEM parts source with factory part numbers and diagrams for every listing
Features and Materials
Key Features
- Genuine CFMoto OEM suspension part, part #30301-080412
- Matches original mounting points and dimensions
- Corrosion-resistant coating where applicable
- Built for full-travel off-road use
- Works with factory bushings, ball joints and hardware
Materials and Construction
CFMoto suspension parts use high-strength steel or forged components for arms, knuckles and linkages, with corrosion-resistant coatings. Bushings use rubber or polymer compounds, and shocks use steel bodies, chrome-plated shafts and nitrogen- or oil-charged dampers.
Common Reasons Riders Replace This Part
- Replacing bent arms, knuckles or links after an impact
- Fixing clunks, play and wandering from worn bushings
- Restoring ride height and damping
- Rebuilding the suspension on a high-hour machine
Signs Your Shock Seal Needs Replacing
- Clunking or knocking over bumps
- Wandering, pulling or loose handling
- Uneven or rapid tire wear
- Visible bends, cracks or leaking shocks
- Play in ball joints or bushings when you rock the wheel
Installation Tips
- Support the machine safely with the suspension unloaded.
- Check the CFMoto parts diagram for bushings, ball joints and hardware.
- Remove the damaged part and check the frame mounts for damage.
- Install the new part, tightening pivot bolts with the suspension at ride height if the manual specifies.
- Torque all hardware, check the alignment (toe), and recheck after the first ride.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
CFMoto Parts Diagrams for This Part
Part #30301-080412 appears in these factory CFMoto parts diagrams. Open the diagram for your model to see exactly where it goes and which parts are installed with it:
Other OEM Parts in This Assembly
Doing the job right? These genuine CFMoto parts are installed alongside the Shock Seal and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Shock Seal with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this CFMoto Shock Seal?
The genuine CFMoto part number is 30301-080412. Use it to match this part to your factory parts diagram.
Which CFMoto models does part #30301-080412 fit?
It fits 8 CFMoto UForce models from 2021 to 2025. The complete list is in the fitment tables above.
Is this a genuine CFMoto part?
Yes. This is a genuine CFMOTO OEM part, the same part number used by CFMoto at the factory, not an aftermarket copy.
Do I need an alignment after replacing suspension parts?
It is a good idea. Arms, knuckles and tie rods affect toe settings, so check and adjust toe after installation.
Should I replace both sides?
For wear items like bushings and shocks, replacing in pairs keeps handling balanced. Impact damage may only need one side.
Is OEM better than aftermarket suspension?
OEM parts restore the factory ride and geometry. Aftermarket arms may add strength or travel but often change geometry.
Order Your Genuine CFMoto Shock Seal Today
Get your UForce models back to factory condition. Add the genuine CFMoto Shock Seal (part #30301-080412) to your cart today, and order the related parts above at the same time so you can finish the job in one go.
Where to Ride Your CFMoto
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.