Genuine Yamaha Slider — OEM Part #JN6-G6253-00-00
Get smooth engagement and steady acceleration back with a genuine Yamaha Slider. Built for the Pro Hauler 700 or Pro Hauler 1000, it matches the original CVT specification, so belt alignment, shift points and cooling airflow stay where they should.
The drive and driven pulleys, belt, covers and cooling ducts work as one system. Worn or mismatched parts cause belt slip, harsh engagement, overheating and early belt failure. This part is confirmed for 3 Yamaha models from 2004 to 2006. See the full fitment list below.
Slider at a Glance
-
OEM part number: JN6-G6253-00-00
-
Brand: Yamaha (genuine factory part)
-
Part type: CVT/Clutch Components
-
Fits: Pro Hauler utility side-by-side models, 2004–2006
-
Condition: New
Yamaha Models and Years This Slider Fits
Genuine Yamaha part #JN6-G6253-00-00 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Yamaha Pro Hauler utility side-by-side Fitment
| Model |
Model Years |
| Yamaha Pro Hauler 700 |
2004–2006 |
| Yamaha Pro Hauler 700 2WD |
2006 |
| Yamaha Pro Hauler 1000 |
2004–2005 |
Why Choose a Genuine Yamaha OEM Slider?
- Factory calibration for engagement and shift-out
- Correct belt alignment and deflection
- Keeps CVT cooling and sealing at factory standard
- Helps your drive belt last longer
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Yamaha model we support
Features and Materials
Key Features
- Genuine Yamaha OEM CVT or clutch part, part #JN6-G6253-00-00
- Built to Yamaha's original clutch specifications
- Precision-machined surfaces where applicable
- Designed for the listed Yamaha drivetrains
- Works with OEM belts, covers, seals and ducts
Materials and Construction
Yamaha CVT and clutch parts use precision-machined aluminum sheaves and housings, hardened steel shafts, weights and rollers, wear-resistant bushings and friction materials, and heat-stable covers and ducts sealed against water and dust.
Common Reasons Riders Replace This Part
- Fixing belt slip, jerky engagement or poor top speed
- Replacing worn sheaves, weights, springs or bushings
- Repairing covers, seals and ducts after water intrusion
- Routine CVT service and belt replacement
Signs Your Slider Needs Replacing
- Belt slipping, squealing or a burning smell
- Jerky, harsh or delayed engagement
- Loss of top speed or pulling power
- Glazed belt or frequent belt failures
- Water or debris inside the CVT cover
Installation Tips
- Remove the CVT cover and clean out belt dust before taking anything apart.
- Use the correct Yamaha clutch tools; pulleys are under spring tension.
- Inspect sheave faces, weights, bushings and the belt while you are in there.
- Assemble to factory torque specs and check belt deflection and alignment.
- Replace cover seals and follow the belt break-in procedure.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Related OEM Parts for the Same Machines
Doing the job right? These genuine Yamaha parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Slider with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Yamaha Slider?
The genuine Yamaha part number is JN6-G6253-00-00. Use it to match this part to your factory parts diagram.
Which Yamaha models does part #JN6-G6253-00-00 fit?
It fits the Pro Hauler 700 (2004–2006); Pro Hauler 700 2WD (2006); Pro Hauler 1000 (2004–2005).
Is this a genuine Yamaha part?
Yes. This is a genuine Yamaha OEM part, the same part number used at the factory, not an aftermarket copy.
Should I replace the belt at the same time?
If the belt is glazed, cracked or worn to minimum width, replace it with the clutch parts.
What causes CVT belts to burn up?
Riding in high range at low speed, heavy loads, water in the CVT and worn clutch parts. Use low range for slow, heavy work.
Do I need special tools?
Yes. Most Yamaha CVT pulleys need specific holding and puller tools to service safely.
Order Your Genuine Yamaha Slider Today
Ride with confidence on parts built for your machine. Order the genuine Yamaha Slider, OEM part #JN6-G6253-00-00, from Witchdoctors today and keep your Pro Hauler 700 or Pro Hauler 1000 running the way Yamaha designed it.
Where to Ride Your Yamaha
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.