Genuine Can-Am Smart Shox Decal — OEM Part #704910981
Restore the showroom look of your Outlander 4x4 or Outlander 1000R with the genuine Can-Am Smart Shox Decal. It is the same factory graphic BRP applies on the assembly line, so the colors, cut lines and logos line up with the rest of your machine instead of standing out as a replacement.
Decals and labels do more than look good. Model graphics identify your machine, and warning labels carry safety and loading information that must stay legible. This part is confirmed for 10 Can-Am models from 2026. See the full fitment list below.
Smart Shox Decal at a Glance
-
OEM part number: 704910981
-
Brand: Can-Am by BRP (genuine factory part)
-
Part type: OEM Decal
-
Fits: Outlander ATV models, 2026
-
Condition: New
Can-Am Models and Years This Smart Shox Decal Fits
Genuine Can-Am part #704910981 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Can-Am Outlander ATV Fitment
| Model |
Model Years |
| Can-Am Outlander 4x4 XT P 1000R (Europe) |
2026 |
| Can-Am Outlander 4x4 XT P 1000R (International) |
2026 |
| Can-Am Outlander 1000R 4x4 XT P |
2026 |
| Can-Am Outlander MAX 4x4 Ldt 1000R (International) |
2026 |
| Can-Am Outlander MAX 4x4 LTD 1000R (Europe) |
2026 |
| Can-Am Outlander MAX 4x4 LTD 1000R (International) |
2026 |
| Can-Am Outlander MAX 4x4 XT P 1000R (Europe) |
2026 |
| Can-Am Outlander MAX 4x4 XT P 1000R (International) |
2026 |
| Can-Am Outlander MAX 1000R 4x4 LTD |
2026 |
| Can-Am Outlander MAX 1000R 4x4 XT P |
2026 |
Why Choose a Genuine Can-Am OEM Smart Shox Decal?
- Exact factory color match, so it blends with the graphics around it
- Pre-cut to the original outline, with no trimming
- Correct placement for the specific panel it was designed for
- Keeps your machine looking original, which helps at resale or trade-in
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Can-Am model we support
Features and Materials
Key Features
- Genuine Can-Am OEM graphic, part #704910981
- UV-resistant inks made for outdoor powersports use
- Pressure-sensitive adhesive backing for a clean, bubble-free bond
- Sized and shaped for the original panel location
- Ready to apply. No paint, primer or special tools needed
Materials and Construction
Can-Am factory decals use a durable vinyl film with a protective top layer that resists sun fade, fuel splash, pressure washing and trail abrasion. The adhesive is designed to hold on curved plastic panels through heat cycles and vibration.
Common Reasons Riders Replace This Part
- Replacing graphics scratched or peeled by brush and roost
- Refreshing a machine before selling or trading it in
- Finishing a body panel replacement so it matches
- Replacing illegible safety or warning labels
Signs Your Smart Shox Decal Needs Replacing
- Edges lifting or peeling away from the panel
- Colors faded or chalky from sun exposure
- Tears, scuffs or missing sections
- A new panel installed without its matching graphic
- Warning information you can no longer read
Installation Tips
- Remove the old decal by warming it gently with a heat gun or hair dryer and peeling slowly.
- Clean off leftover adhesive, then wipe the area with isopropyl alcohol.
- Let the surface dry and work at room temperature (roughly 60–90°F).
- Peel back a small section of backing, align one edge, and press outward with a squeegee.
- Work across the decal to push out air, press the edges firmly and avoid pressure washing for 24–48 hours.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Can-Am Parts Diagrams for Your Machine
Find part #704910981 and every part installed with it in the factory Can-Am parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Can-Am parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Smart Shox Decal with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Can-Am Smart Shox Decal?
The genuine Can-Am part number is 704910981. Use it to match this part to your factory parts diagram.
Which Can-Am models does part #704910981 fit?
It fits 10 Can-Am Outlander models from 2026 to 2026. The complete list is in the fitment tables above.
Is this a genuine Can-Am part?
Yes. This is a genuine Can-Am OEM part from BRP, the same part number used at the factory, not an aftermarket copy.
Will this decal match my other graphics?
Yes. It is the genuine Can-Am graphic for the listed models and years. Graphics on older machines may have faded slightly, so a new decal can look brighter at first.
Do I need to remove the panel to install it?
Usually not. Removing the panel can make cleaning and alignment easier on tight curves.
Can I apply it in cold weather?
For the best bond, apply it at room temperature. Warm the panel first if you are working in a cold garage.
Order Your Genuine Can-Am Smart Shox Decal Today
Ride with confidence on parts built for your machine. Order the genuine Can-Am Smart Shox Decal, OEM part #704910981, from Witchdoctors today and keep your Outlander 4x4 or Outlander 1000R running the way BRP designed it.
Where to Ride Your Can-Am
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.