Genuine Can-Am Spacer — OEM Part #420231080
Small parts hold big things together. The genuine Can-Am Spacer is the exact factory fastener specified for your Outlander 400 or Outlander XT, with the correct size, thread, length, grade and finish, so it fits right and holds torque.
OEM hardware is engineered for a specific location and load. The wrong grade, length or thread can strip threads, loosen under vibration or let critical parts shift. This part is confirmed for 5 Can-Am models from 2011 to 2014. See the full fitment list below.
Spacer at a Glance
-
OEM part number: 420231080
-
Brand: Can-Am by BRP (genuine factory part)
-
Part type: Engine Cylinder
-
Fits: Outlander ATV models, 2011–2014
-
Condition: New
Can-Am Models and Years This Spacer Fits
Genuine Can-Am part #420231080 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Can-Am Outlander ATV Fitment
| Model |
Model Years |
| Can-Am Outlander 400 EFI |
2011 |
| Can-Am Outlander 400 EFI XT |
2012–2014 |
| Can-Am Outlander MAX 400 EFI |
2011, 2014 |
| Can-Am Outlander MAX 400 EFI XT |
2014 |
| Can-Am Outlander MAX XT 400 EFI |
2012–2013 |
Why Choose a Genuine Can-Am OEM Spacer?
- Exact factory size, thread pitch and length
- Correct strength grade for its location
- Factory corrosion-resistant finish
- No guessing at metric sizes or grades
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Can-Am model we support
Features and Materials
Key Features
- Genuine Can-Am OEM hardware, part #420231080
- Matches the original thread, length, head style and grade
- Plated or coated to resist corrosion (where applicable)
- Used across several Can-Am assemblies, as listed in the fitment table
- Ideal for replacing lost, stripped or one-time-use fasteners
Materials and Construction
Can-Am fasteners are heat-treated alloy or carbon steel, or stainless steel where corrosion resistance matters most, with zinc or similar plating. Washers, clips and bushings are steel, spring steel, nylon or rubber depending on the job.
Common Reasons Riders Replace This Part
- Replacing hardware lost on the trail
- Replacing stretched, rusted or stripped fasteners
- Rebuilds that call for new one-time-use hardware
- Keeping spares for common repairs
Signs Your Spacer Needs Replacing
- Rounded heads or damaged threads
- Rust that weakens the fastener
- Missing hardware that leaves a part loose
- Bolts that will not hold torque
- Self-locking nuts or one-time bolts that were already reused
Installation Tips
- Check the Can-Am parts diagram for the location and quantity you need.
- Clean the threads in the mating part, chasing damaged threads with a tap if needed.
- Apply thread locker or anti-seize only where the service manual specifies.
- Start the fastener by hand to avoid cross-threading.
- Tighten to the factory torque spec with a calibrated torque wrench.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Related OEM Parts for the Same Machines
Doing the job right? These genuine Can-Am parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Spacer with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Can-Am Spacer?
The genuine Can-Am part number is 420231080. Use it to match this part to your factory parts diagram.
Which Can-Am models does part #420231080 fit?
It fits the Outlander 400 EFI (2011); Outlander 400 EFI XT (2012–2014); Outlander MAX 400 EFI (2011, 2014); Outlander MAX 400 EFI XT (2014); Outlander MAX XT 400 EFI (2012–2013).
Is this a genuine Can-Am part?
Yes. This is a genuine Can-Am OEM part from BRP, the same part number used at the factory, not an aftermarket copy.
Can I use a hardware-store bolt instead?
It may look the same, but grade, pitch, length and finish often differ. For suspension, brakes or engine parts, use the specified OEM fastener.
Is this sold individually?
This listing is for the part number shown. Check the parts diagram for the quantity at each location.
Should I reuse self-locking nuts?
No. Self-locking and torque-to-yield fasteners are designed for one use.
Order Your Genuine Can-Am Spacer Today
Get your Outlander 400 or Outlander XT back to factory condition. Add the genuine Can-Am Spacer (part #420231080) to your cart today, and order the related parts above at the same time so you can finish the job in one go.
Where to Ride Your Can-Am
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.