Hard starts, a rough idle or a stumble off the line can all start with worn spark plugs. E3 10mm Diamond Fire Spark Plug E338 for Victory is a 10mm plug with E3’s patented Diamond Fire electrode, listed for 2003–2007 Victory models. It’s sold individually.
Shop more ignition parts in our spark plugs and wires collection.
Why Choose E3 Diamond Fire
Key Features
- Patented Diamond Fire open-gap electrode (per E3)
- Spark travels across the electrode edges for a larger flame kernel (per E3)
- Designed to burn the air/fuel mixture more completely (per E3)
- Comes pre-gapped; don’t adjust the gap (per E3)
- Sold individually
Great For
- Routine tune-ups
- Victory riders replacing worn plugs
- Riders who want to try a different electrode design
Specifications
-
Brand: E3
-
Part number: E338
-
Thread: 10mm
-
Electrode: Diamond Fire (per E3)
-
Gap: Pre-gapped; do not adjust (per E3)
-
Quantity: 1 plug
Fitment
Listed for these models:
-
Victory Hammer: 2005–2007
-
Victory Jackpot: 2006–2007
-
Victory Kingpin: 2004–2007
-
Victory Vegas: 2003–2007
Victory twins take two plugs, so order two. Earlier and later Victory models use a different thread size; see the E3 12mm plug (E336). Contact us with your year and model if you aren’t sure.
How the Diamond Fire Electrode Works
A standard plug fires a spark from the center electrode to a bent ground strap. E3’s Diamond Fire design uses an open ground electrode with edges, so the spark can form along those edges and the flame kernel is more exposed to the air/fuel mixture (per E3).
E3 says this burns the mixture faster and more completely. Results vary with engine condition, tuning and fuel; a fresh set of any correct plug helps a tired engine.
E3 vs. Iridium and Copper Plugs
-
Copper: Inexpensive, good conductor; wears fastest.
-
Iridium: Fine center electrode for a focused spark and long life.
-
E3 Diamond Fire: Different ground electrode shape to expose the spark to more of the mixture (per E3).
Whichever you choose, use the heat range and thread your engine calls for.
Signs Your Plugs Need Replacing
- Hard starting, especially cold
- Rough idle or misfires
- Hesitation when you open the throttle
- Worn, rounded or heavily fouled electrodes
- You’ve reached the interval in your owner’s manual
How to Install
- Let the engine cool completely.
- Clean around the plug well so dirt can’t fall into the cylinder.
- Remove the plug wire or coil by the boot, not the wire.
- Remove the old plug and inspect it.
- Thread the E3 plug in by hand to avoid cross-threading.
- Torque to your service manual’s spec and reinstall the boot.
Don’t adjust the gap (per E3). A thin coat of dielectric grease inside the boot helps it seal and come off easily next time.
Care Tips
- Check plugs at each service interval.
- Replace plugs in pairs.
- Keep boots and wires in good shape.
Related Products
Shop More
Helpful Guides From the Witchdoctors Blog
Frequently Asked Questions
Do I need to gap it?
No, it comes pre-gapped. Don’t adjust it (per E3).
How many do I need?
Victory V-twins use two plugs; this is sold individually.
Does it fit my Indian?
This listing is for the Victory models above. Contact us for Indian fitment.
Will it void my warranty?
Spark plugs are a maintenance item, but check your owner’s manual or dealer for your coverage.
Can I return it?
Unused items in original packaging can usually be returned. Contact our customer service team, and we’ll help.
Where to Ride
Fresh plugs, smooth start. Take it out on one of these:
Order the E3 10mm Diamond Fire Spark Plug E338 for Victory Today
Add it to your cart, and Witchdoctors will get it moving. Questions? Contact our team, and we’ll help.
General Safety Warning & Installation Requirements
Your safety is our top priority. Whether you are maintaining a Victory® or Indian® Motorcycle,
or servicing a UTV, ATV, or Side-by-Side, proper installation is vital to the performance and safety
of your vehicle.
Important:
⚠️
Warning: Failure to follow manufacturer-specified installation procedures and
safety requirements can result in mechanical failure, loss of vehicle control, serious injury, or death.
Important Fitment Disclosure
At Witchdoctors, we want to ensure you get back on the road or trail as quickly as possible. Correct fitment
is the most critical step in purchasing parts for your Victory® or Indian® Motorcycle. Also for your
Polaris®, CFMoto®, Arctic Cat®, Yamaha®, Honda®, Can-Am®, Kawasaki® UTV and ATV.
⚠️
Verification Required: While we strive for 100% accuracy, vehicle manufacturers often
make mid-year production changes. Always verify your specific year, make, and model before finalizing
your order.
Read More
Shipping
Qualifying Retail orders $159.99 or more will receive free ground shipping. Free Shipping Terms and conditions.
All orders over $500 will require a signature.
Please see International Shipping page for orders shipping outside the US.
See our full Shipping Policy page for further details.
Product Availability
We show real time product availability. These products normally ship the same business day but may ship from one of our warehouses across the country. If an item requires additional processing time you will be notified.
Returns
If your order arrives and it is not right, we will we'll fix it. We promise!
Doesn't fit or just not happy with it? You can return any new, unopened, unused or unaltered item within 30 days of delivery receipt of your item. We will issue a refund to your original payment method.
See our full Return Policy for all of the pertinent details.
AUTOLITE EQUIVALENT 4302,4303,XS4302,XS4303 CHAMPION EQUIVALENT G57C,G59C ELECTRODE TIP MATERIAL Platinum ELECTRODE TIP STYLE Standard MADE IN THE U.S.A. No MODEL E3 PACKAGING Each REACH 3/4" RESISTOR No SPECIFIC APPLICATION No STUD TYPE Threaded STYLE Performance Replacement THREAD 14mm TYPE Spark Plug VENDOR REFERENCE E3.38