Genuine Kawasaki Spark Plug Cap — OEM Part #21130-2060
Restore reliable power and electronics with a genuine Kawasaki Spark Plug Cap. Built for the Mule models, it matches the factory connectors and electrical values, with no splicing or adapters.
Harnesses, switches, relays, sensors, charging parts, ignition parts and control units all work together. A wrong connector or out-of-spec part can cause no-starts, warning lights or damage to other electronics. This part is confirmed for 16 Kawasaki models from 1992 to 2027. See the full fitment list below.
Spark Plug Cap at a Glance
-
OEM part number: 21130-2060
-
Brand: Kawasaki (genuine factory part)
-
Part type: Spark Plug
-
Fits: Mule utility side-by-side models, 1992–2027
-
Condition: New
Kawasaki Models and Years This Spark Plug Cap Fits
Genuine Kawasaki part #21130-2060 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Kawasaki Mule utility side-by-side Fitment
| Model |
Model Years |
| Kawasaki Mule 2500 |
1992–2005 |
| Kawasaki Mule 2510 |
1993–2002 |
| Kawasaki Mule 2520 |
1993 and earlier (1993–2000, 2007) |
| Kawasaki Mule 3000 |
2001 and earlier (2001–2008) |
| Kawasaki Mule 3010 4x4 |
2001 and earlier (2001–2008) |
| Kawasaki Mule 3010 Trans 4x4 |
2005 and earlier (2005, 2007–2008) |
| Kawasaki Mule 3010 Trans 4x4l |
2006 |
| Kawasaki Mule 4000 |
2009–2023, 2025–2027 |
| Kawasaki Mule 4000 Trans |
2018–2021, 2025–2027 |
| Kawasaki Mule 4010 4x4 |
2009–2027 |
| Kawasaki Mule 4010 4x4 FE |
2021–2025 |
| Kawasaki Mule 4010 4x4 SE |
2016–2018 |
| Kawasaki Mule 4010 Trans 4x4 |
2009–2027 |
| Kawasaki Mule 4010 Trans 4x4 Camo |
2015–2023, 2025–2027 |
| Kawasaki Mule 4010 Trans 4x4 FE |
2021–2025 |
| Kawasaki Mule 4010 Trans 4x4 SE |
2016–2018 |
Why Choose a Genuine Kawasaki OEM Spark Plug Cap?
- Plug-and-play fit with factory connectors
- Correct electrical ratings for your machine
- Weather-sealed for mud, water and pressure washing
- Works with the factory ECU or CDI, meter and diagnostics
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Kawasaki model we support
Features and Materials
Key Features
- Genuine Kawasaki OEM electrical part, part #21130-2060
- Original connectors, terminals and pin-outs
- Water- and vibration-resistant construction
- Designed for the listed Kawasaki models
- No splicing or adapters needed
Materials and Construction
Kawasaki electrical parts use tinned copper conductors, sealed connectors, heat- and abrasion-resistant insulation and loom, and sealed housings for modules and sensors exposed to water and vibration.
Common Reasons Owners Replace This Part
- Fixing no-start, no-charge or intermittent faults
- Replacing harness sections damaged by rodents, heat or abrasion
- Replacing failed switches, relays, sensors or modules
- Restoring meter functions and warning lights
Signs Your Spark Plug Cap Needs Replacing
- No-start, clicking or intermittent power loss
- Check engine or warning lights
- Battery not charging
- Melted, corroded or broken connectors and wires
- Switches, meters or accessories that do not work
Installation Tips
- Disconnect the negative battery cable first.
- Use the Kawasaki parts and wiring diagrams to confirm routing and connectors.
- Clean corroded connectors with contact cleaner.
- Make sure every connector clicks fully and seals.
- Route wiring away from heat and moving parts, then test.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Kawasaki Parts Diagrams for Your Machine
Find part #21130-2060 and every part installed with it in the factory Kawasaki parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Kawasaki parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Spark Plug Cap with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Kawasaki Spark Plug Cap?
The genuine Kawasaki part number is 21130-2060. Use it to match this part to your factory parts diagram.
Which Kawasaki models does part #21130-2060 fit?
It fits 16 Kawasaki Mule models from 1992 to 2027. The complete list is in the fitment tables above.
Is this a genuine Kawasaki part?
Yes. This is a genuine Kawasaki OEM part, the same part number used at the factory, not an aftermarket copy.
Will this part need programming?
Most plug-in parts do not. Some control units may need dealer setup. Check your service manual or contact us before ordering.
How do I find an electrical problem before buying parts?
Start with the battery, grounds and fuses. Many faults are a loose ground or corroded connector.
Should I use dielectric grease?
A light coat on connector seals helps keep water out. Follow your service manual.
Order Your Genuine Kawasaki Spark Plug Cap Today
Work and ride with confidence on parts built for your machine. Order the genuine Kawasaki Spark Plug Cap, OEM part #21130-2060, from Witchdoctors today and keep your Mule models running the way Kawasaki designed it.
Where to Ride Your Kawasaki
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.