Genuine Polaris Spark Plug Wire — OEM Part #4016939
Electrical gremlins are some of the hardest problems to chase. The genuine Polaris Spark Plug Wire plugs into your Ranger models with the original connectors, pin-outs and specifications, so it works with the factory wiring and electronics the first time.
Harnesses, switches, relays, sensors, charging parts and control modules all talk to each other. A wrong connector or out-of-spec part can cause no-starts, warning lights or damage to other electronics. This part is confirmed for 138 Polaris models from 2018 to 2026. See the full fitment list below.
Spark Plug Wire at a Glance
-
OEM part number: 4016939
-
Brand: Polaris (genuine factory part)
-
Part type: Spark Plug Wires
-
Fits: Ranger utility side-by-side models, 2018–2026
-
Condition: New
Polaris Models and Years This Spark Plug Wire Fits
Genuine Polaris part #4016939 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
This part is shared across 138 Polaris model variants, so the table below groups them by model family. Your exact trim is listed in the parts diagrams linked further down.
Polaris Ranger utility side-by-side Fitment
| Model Family |
Model Years |
Trims |
| Polaris Ranger |
2018–2020 |
3 |
| Polaris Ranger 1000 |
2018–2024 |
21 |
| Polaris Ranger Back |
2020 |
2 |
| Polaris Ranger Diesel |
2020 |
1 |
| Polaris Ranger FC |
2020 |
2 |
| Polaris Ranger HD |
2020 |
1 |
| Polaris Ranger High |
2019–2020 |
2 |
| Polaris Ranger Intl |
2018 |
1 |
| Polaris Ranger Is |
2020 |
1 |
| Polaris Ranger MD |
2024 |
1 |
| Polaris Ranger Northstar |
2018–2020 |
12 |
| Polaris Ranger RC |
2020 |
2 |
| Polaris Ranger Texas |
2020 |
1 |
| Polaris Ranger Tx |
2020 |
1 |
| Polaris Ranger Winter |
2020 |
2 |
| Polaris Ranger XP |
2018–2024, 2026 |
85 |
Why Choose a Genuine Polaris OEM Spark Plug Wire?
- Plug-and-play fit with factory connectors
- Correct electrical ratings for your machine
- Weather-sealed for mud, water and pressure washing
- Works with the factory ECU, gauges and diagnostics
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Polaris model we support
Features and Materials
Key Features
- Genuine Polaris OEM electrical part, part #4016939
- Original connectors, terminals and pin-outs
- Water- and vibration-resistant construction
- Designed for the listed Polaris models
- No splicing or adapters needed
Materials and Construction
Polaris electrical parts use tinned copper conductors, sealed connectors, heat- and abrasion-resistant insulation and loom, and sealed housings for modules and sensors exposed to water and vibration.
Common Reasons Riders Replace This Part
- Fixing no-start, no-charge or intermittent faults
- Replacing harness sections damaged by rodents, heat or abrasion
- Replacing failed switches, relays, sensors or modules
- Restoring gauge functions and warning lights
Signs Your Spark Plug Wire Needs Replacing
- No-start, clicking or intermittent power loss
- Check engine or warning lights
- Battery not charging
- Melted, corroded or broken connectors and wires
- Switches, gauges or accessories that do not work
Installation Tips
- Disconnect the negative battery cable first.
- Use the Polaris parts and wiring diagrams to confirm routing and connectors.
- Clean corroded connectors with contact cleaner.
- Make sure every connector clicks fully and seals.
- Route wiring away from heat and moving parts, then test.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Polaris Parts Diagrams for Your Machine
Find part #4016939 and every part installed with it in the factory Polaris parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Polaris parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Spark Plug Wire with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Polaris Spark Plug Wire?
The genuine Polaris part number is 4016939. Use it to match this part to your factory parts diagram.
Which Polaris models does part #4016939 fit?
It fits 138 Polaris Ranger models from 2018 to 2026. The complete list is in the fitment tables above.
Is this a genuine Polaris part?
Yes. This is a genuine Polaris OEM part, the same part number used at the factory, not an aftermarket copy.
Will this part need programming?
Most plug-in parts do not. Some modules and keys need dealer programming. Check your service manual or contact us before ordering.
How do I find an electrical problem before buying parts?
Start with the battery, grounds and fuses. Many faults are a loose ground or corroded connector.
Should I use dielectric grease?
A light coat on connector seals helps keep water out. Follow your service manual.
Order Your Genuine Polaris Spark Plug Wire Today
Get your Ranger models back to factory condition. Add the genuine Polaris Spark Plug Wire (part #4016939) to your cart today, and order the related parts above at the same time so you can finish the job in one go.
Where to Ride Your Polaris
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.