Indian Spring Compensator 7043923

Genuine Indian Spring Compensator — OEM Part #7043923

Get smooth launches and clean shifts back with the genuine Indian Spring Compensator, part #7043923. It is the factory clutch or primary part for the Indian Chief Vintage, Chieftain and other models.

The clutch and primary drive transfer engine power to the transmission and let you launch smoothly. Worn parts cause slipping, dragging and hard shifts. This part is confirmed for 10 Indian models from 2014 to 2017. See the full fitment list below.

Availability note: This part is listed as discontinued or no longer available, and stock may be limited. See what to do when a part is no longer available or contact us for help finding a replacement.

Indian Spring Compensator at a Glance

• OEM part number: 7043923
• Brand: Indian Motorcycle (genuine OEM part)
• Part type: Clutch Repair Parts
• Fits: Indian Chieftain, Roadmaster and Springfield and Chief Cruiser models, 2014–2017
• Condition: New

Indian Models and Years This Spring Compensator Fits

Genuine Indian part #7043923 fits the models and years below. To be certain, match the part number to the factory parts diagram for your bike, or contact us with your VIN before ordering.

Indian Chieftain, Roadmaster and Springfield Fitment

Indian Chief Cruiser Fitment

Why Choose a Genuine Indian OEM Spring Compensator?

• Factory engagement feel and lever pull
• Correct friction and spring rates for Indian torque
• Smooth, predictable launches
• Reduces wear on the transmission
• Made to the same specifications as the part installed at the factory, not an aftermarket copy
• Sold by Witchdoctors, an Indian Motorcycle OEM parts source with factory part numbers and diagrams for every listing

Every Indian, from the Chief and Chieftain to the Challenger, Scout and FTR, is engineered as a complete system. Genuine OEM parts keep your bike correct, reliable and easier to sell. Learn more in our Indian motorcycle parts guide.

Features and Materials

Key Features

• Genuine Indian Motorcycle OEM part #7043923
• Matches original dimensions and splines
• Designed to run in the Indian wet clutch
• Direct replacement for the listed models

Materials and Construction

Indian clutch parts use bonded friction plates, hardened steel plates and springs, and machined aluminum or steel hubs and baskets built to run in oil.

Common Reasons Riders Replace This Part

• Fixing a slipping clutch under acceleration
• Curing clutch drag or hard neutral
• Clutch rebuilds at high mileage
• Replacing worn clutch hardware or covers

Signs Your Spring Compensator Needs Replacing

• Engine revs rise but speed does not
• Hard to find neutral or the bike creeps in gear
• Clunky or notchy shifts
• Burnt smell or debris in the oil

Installation Tips

1. Drain oil if the job requires opening the clutch or primary cover.
2. Remove the cover and note the order of plates and springs.
3. Soak new friction plates in the specified oil before installing.
4. Install parts in the factory order and torque bolts in a cross pattern.
5. Set cable free play or check hydraulic operation, then refill and test-ride.

Not sure whether to do it yourself? Read when to seek professional help or DIY before you start.

Indian Parts Diagrams for This Part

Find part #7043923 in the factory Indian parts diagrams for your bike. Open the diagrams for your model and year to see exactly where it goes and which parts install with it:

• 2017 Indian Chief Classic parts diagrams
• 2017 Indian Chief Dark Horse parts diagrams
• 2017 Indian Chief Vintage parts diagrams
• 2017 Indian Chieftain parts diagrams
• 2017 Indian Chieftain Dark Horse parts diagrams
• 2017 Indian Chieftain Elite parts diagrams
• 2017 Indian Chieftain Limited parts diagrams
• 2017 Indian Roadmaster parts diagrams

Related Indian OEM Parts

Doing the job right? These genuine Indian parts fit the same bikes and are often replaced at the same time:

• Indian Clutch Arm Pinion Shaft (#6230585)
• Indian Starter Torque Limit Gear (#1204652)
• Indian Clutch Judder Spring Seat (#5256848)
• Indian Clutch Lifter Shaft / Rack (#6230980)
• Indian Clutch Lifter Shaft / Rack (#6230670)
• Indian Clutch Pressure Plate (#5138284)

Recommended Accessories and Maintenance Supplies

Pair your Spring Compensator with these parts and supplies:

• Indian clutch and throttle cables — Replacement and extended-length cables
• Indian oil change kits — Complete oil change kits for Indian models
• Indian engine parts — Gaskets, seals, bearings and internal engine parts
• Indian motorcycle levers — Clutch and brake levers
• Indian OEM parts diagrams — find every factory part for your model

Helpful Guides from the Witchdoctors Blog

• What Does JASO Rated Oil Mean and Why Does It Matter?
• Replacing Motorcycle Gasket & Seal Tips
• Victory & Indian Motorcycle Maintenance Checklist
• Spring Tune-Up for Your Victory or Indian Motorcycle: Get Ready to Ride!

Frequently Asked Questions

What is the OEM part number for this Indian Spring Compensator?

The genuine Indian Motorcycle part number is 7043923. Use it to match this part to your factory parts diagram.

Which Indian models does part #7043923 fit?

It fits the Indian Chief Vintage (2014–2017); Indian Chieftain (2014–2017); Indian Chief Classic (2014–2017); Indian Roadmaster (2015–2017); Indian Chief Dark Horse (2016–2017); Indian Chieftain Dark Horse (2016–2017); Indian Springfield (2016–2017); Indian Chieftain Elite (2017); Indian Chieftain Limited (2017); Indian Roadmaster Classic (2017).

Is this a genuine Indian Motorcycle part?

Yes. This is a genuine Indian Motorcycle OEM part, the same part number used at the factory, not an aftermarket copy.

How do I make sure this fits my bike?

Match part #7043923 to the parts diagram for your model and year, or send us your VIN and we will confirm it for you.

Should I replace all clutch plates together?

Yes. Replacing friction and steel plates as a set gives even engagement and the longest life.

Can the wrong oil make my clutch slip?

Yes. Use a JASO MA-rated motorcycle oil. Oils with friction modifiers can cause slipping.

Do I need a new cover gasket?

Usually. Replace the gasket or O-ring whenever the cover is removed.

Order Your Genuine Indian Spring Compensator Today

Ride with confidence on parts made for your bike. Order the genuine Indian Spring Compensator, OEM part #7043923, from Witchdoctors today and keep your Indian Chief Vintage, Chieftain and other models running the way Indian designed it.

• How long will it take to receive my order?
• Shipping and return policy
• Questions about fitment? Contact us
• Shop all Indian OEM parts

Where to Ride Your Indian

Your Indian was built for the open road. These scenic routes are favorites with motorcycle riders. Check current road conditions, seasonal closures and park fees before you go.

• Kancamagus Scenic Byway — White Mountains, New Hampshire: 34.5 miles through the White Mountain National Forest
• Cherohala Skyway — Tennessee and North Carolina: 43 miles of high, sweeping mountain curves