Genuine Polaris D-Tent Spring — OEM Part #1800128
Worn suspension parts turn a smooth ride into a punishing one and make handling unpredictable. The genuine Polaris D-Tent Spring restores the factory geometry, travel and ride quality of your Polaris ATV or side-by-side.
A-arms, trailing arms, shocks, springs, sway bars, knuckles and bushings control wheel movement and alignment. Bent or worn parts cause wandering, uneven tire wear and harsh handling. This part is confirmed for 63 Polaris models from 2010 to 2023. See the full fitment list below.
D-Tent Spring at a Glance
-
OEM part number: 1800128
-
Brand: Polaris (genuine factory part)
-
Part type: Suspension Spring
-
Note: 10
-
Fits: ACE single-seat, General crossover side-by-side, RZR sport side-by-side, Ranger utility side-by-side and Sportsman ATV models, 2010–2023
-
Condition: New
Polaris Models and Years This D-Tent Spring Fits
Genuine Polaris part #1800128 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
This part is shared across 63 Polaris model variants, so the table below groups them by model family. Your exact trim is listed in the parts diagrams linked further down.
Polaris ACE single-seat Fitment
| Model Family |
Model Years |
Trims |
| Polaris ACE 900 |
2017–2019 |
1 |
Polaris General crossover side-by-side Fitment
| Model Family |
Model Years |
Trims |
| Polaris General 1000 |
2020 |
1 |
| Polaris General XP |
2020–2023 |
23 |
Polaris RZR sport side-by-side Fitment
| Model Family |
Model Years |
Trims |
| Polaris RZR 800 |
2010–2012, 2014 |
2 |
| Polaris RZR 900 |
2014 |
2 |
| Polaris RZR RS1 |
2018–2022 |
1 |
| Polaris RZR S |
2017–2021 |
8 |
| Polaris RZR Trail |
2023 |
1 |
| Polaris RZR XP |
2012–2023 |
21 |
Polaris Ranger utility side-by-side Fitment
| Model Family |
Model Years |
Trims |
| Polaris Ranger 800 |
2012 |
1 |
| Polaris Ranger XP |
2012 |
1 |
Polaris Sportsman ATV Fitment
| Model Family |
Model Years |
Trims |
| Polaris Sportsman XP |
2020–2021 |
1 |
Why Choose a Genuine Polaris OEM D-Tent Spring?
- Factory geometry for straight tracking
- Correct bushing and ball joint fit
- Restores original ride height and travel
- Spreads loads across the frame as designed
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Polaris model we support
Features and Materials
Key Features
- Genuine Polaris OEM suspension part, part #1800128
- Original mounting points and dimensions
- Corrosion-resistant coating where applicable
- Built for full-travel off-road use
- Works with factory bushings, ball joints and hardware
Materials and Construction
Polaris suspension parts use high-strength steel for arms, knuckles and links with corrosion-resistant coatings, rubber or polymer bushings, and shocks with steel bodies, chromed shafts and oil or nitrogen damping.
Common Reasons Riders Replace This Part
- Replacing bent arms, knuckles or links after an impact
- Fixing clunks and wandering from worn bushings
- Restoring ride height and damping
- Rebuilding the suspension on a high-hour machine
Signs Your D-Tent Spring Needs Replacing
- Clunking or knocking over bumps
- Wandering, pulling or loose handling
- Uneven or rapid tire wear
- Visible bends, cracks or leaking shocks
- Play in ball joints or bushings
Installation Tips
- Support the machine safely with the suspension unloaded.
- Check the Polaris parts diagram for bushings, ball joints and hardware.
- Remove the damaged part and inspect the frame mounts.
- Install, tightening pivot bolts at ride height if the manual specifies.
- Torque all hardware, set toe, and recheck after the first ride.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Polaris Parts Diagrams for Your Machine
Find part #1800128 and every part installed with it in the factory Polaris parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Polaris parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your D-Tent Spring with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Polaris D-Tent Spring?
The genuine Polaris part number is 1800128. Use it to match this part to your factory parts diagram. Note: 10.
Which Polaris models does part #1800128 fit?
It fits 63 Polaris ACE, General, RZR, Ranger and Sportsman models from 2010 to 2023. The complete list is in the fitment tables above.
Is this a genuine Polaris part?
Yes. This is a genuine Polaris OEM part, the same part number used at the factory, not an aftermarket copy.
Do I need an alignment after replacing suspension parts?
Yes, check and set toe after installation.
Should I replace both sides?
For wear items like bushings and shocks, replace in pairs to keep handling balanced.
Is OEM better than aftermarket suspension?
OEM restores factory ride and geometry. Aftermarket arms may add strength or travel but often change geometry.
Order Your Genuine Polaris D-Tent Spring Today
Get your Polaris ATV or side-by-side back to factory condition. Add the genuine Polaris D-Tent Spring (part #1800128) to your cart today, and order the related parts above at the same time so you can finish the job in one go.
Where to Ride Your Polaris
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.