Genuine Can-Am Spring Guide — OEM Part #706004247
Bring back the factory ride and handling with a genuine Can-Am Spring Guide. Built for the Outlander models, it keeps the original geometry, bushing fit and travel, so the machine tracks straight and soaks up the trail.
A-arms, trailing arms, shocks, springs, sway bars, knuckles and bushings control wheel movement and alignment. Bent or worn parts cause wandering, uneven tire wear and harsh handling. This part is confirmed for 13 Can-Am models from 2024 to 2025. See the full fitment list below.
Spring Guide at a Glance
-
OEM part number: 706004247
-
Brand: Can-Am by BRP (genuine factory part)
-
Part type: Suspension Repair
-
Fits: Outlander ATV models, 2024–2025
-
Condition: New
Can-Am Models and Years This Spring Guide Fits
Genuine Can-Am part #706004247 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Can-Am Outlander ATV Fitment
| Model |
Model Years |
| Can-Am Outlander 6x6 Xu+ 650 EFI (Europe) |
2025 |
| Can-Am Outlander 6x6 Xu+ EFI (Europe) |
2025 |
| Can-Am Outlander 650 EFI 6x6 Xu+ (International) |
2024 |
| Can-Am Outlander EFI 6x6 Xu+ (International) |
2024 |
| Can-Am Outlander MAX 6x6 DPS 650 EFI (International) |
2025 |
| Can-Am Outlander MAX 6x6 EFI XT |
2025 |
| Can-Am Outlander MAX 6x6 Xu+ 650 EFI (Europe) |
2025 |
| Can-Am Outlander MAX 6x6 Xu+ EFI (Europe) |
2025 |
| Can-Am Outlander MAX 650 6x6 DPS EFI |
2025 |
| Can-Am Outlander MAX 650 EFI 6x6 DPS |
2024 |
| Can-Am Outlander MAX 650 EFI 6x6 Xu+ (International) |
2024 |
| Can-Am Outlander MAX EFI 6x6 XT |
2024 |
| Can-Am Outlander MAX EFI 6x6 Xu+ (International) |
2024 |
Why Choose a Genuine Can-Am OEM Spring Guide?
- Factory geometry for straight tracking
- Correct bushing and ball joint fit
- Restores original ride height and travel
- Spreads loads across the frame as BRP designed
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Can-Am model we support
Features and Materials
Key Features
- Genuine Can-Am OEM suspension part, part #706004247
- Original mounting points and dimensions
- Corrosion-resistant coating where applicable
- Built for full-travel off-road use
- Works with factory bushings, ball joints and hardware
Materials and Construction
Can-Am suspension parts use high-strength steel for arms, knuckles and links with corrosion-resistant coatings, rubber or polymer bushings, and shocks with steel bodies, chromed shafts and oil or nitrogen damping.
Common Reasons Riders Replace This Part
- Replacing bent arms, knuckles or links after an impact
- Fixing clunks and wandering from worn bushings
- Restoring ride height and damping
- Rebuilding the suspension on a high-hour machine
Signs Your Spring Guide Needs Replacing
- Clunking or knocking over bumps
- Wandering, pulling or loose handling
- Uneven or rapid tire wear
- Visible bends, cracks or leaking shocks
- Play in ball joints or bushings
Installation Tips
- Support the machine safely with the suspension unloaded.
- Check the Can-Am parts diagram for bushings, ball joints and hardware.
- Remove the damaged part and inspect the frame mounts.
- Install, tightening pivot bolts at ride height if the manual specifies.
- Torque all hardware, set toe, and recheck after the first ride.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Can-Am Parts Diagrams for Your Machine
Find part #706004247 and every part installed with it in the factory Can-Am parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Can-Am parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Spring Guide with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Can-Am Spring Guide?
The genuine Can-Am part number is 706004247. Use it to match this part to your factory parts diagram.
Which Can-Am models does part #706004247 fit?
It fits 13 Can-Am Outlander models from 2024 to 2025. The complete list is in the fitment tables above.
Is this a genuine Can-Am part?
Yes. This is a genuine Can-Am OEM part from BRP, the same part number used at the factory, not an aftermarket copy.
Do I need an alignment after replacing suspension parts?
Yes, check and set toe after installation.
Should I replace both sides?
For wear items like bushings and shocks, replace in pairs to keep handling balanced.
Is OEM better than aftermarket suspension?
OEM restores factory ride and geometry. Aftermarket arms may add strength or travel but often change geometry.
Order Your Genuine Can-Am Spring Guide Today
Ride with confidence on parts built for your machine. Order the genuine Can-Am Spring Guide, OEM part #706004247, from Witchdoctors today and keep your Outlander models running the way BRP designed it.
Where to Ride Your Can-Am
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.