Genuine Kawasaki Spring Pin — OEM Part #555A0528
Grinding gears, popping out of range and vibration all point to the drivetrain. The genuine Kawasaki Spring Pin restores factory shifting and power delivery on your Mule models, built to the exact dimensions of the original so it meshes and mounts correctly.
The transmission, shift mechanism, gearcases and drive shafts carry the full torque of the engine. Worn or mismatched parts cause noise, hard shifting and expensive failures. This part is confirmed for 11 Kawasaki models from 1990 to 2007. See the full fitment list below.
Spring Pin at a Glance
-
OEM part number: 555A0528
-
Brand: Kawasaki (genuine factory part)
-
Part type: Gearcase Assembly
-
Fits: Mule utility side-by-side models, 1990–2007
-
Condition: New
Kawasaki Models and Years This Spring Pin Fits
Genuine Kawasaki part #555A0528 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Kawasaki Mule utility side-by-side Fitment
| Model |
Model Years |
| Kawasaki Mule 1000 |
1990 and earlier (1990–1995, 2007) |
| Kawasaki Mule 2010 |
1990 and earlier (1990–1992, 2007) |
| Kawasaki Mule 2020 |
1990 and earlier (1990–1992, 2007) |
| Kawasaki Mule 2030 |
1991 and earlier (1991, 2007) |
| Kawasaki Mule 2500 |
1992–2005 |
| Kawasaki Mule 2510 |
1993–2002 |
| Kawasaki Mule 2510 Diesel |
2000 and earlier (2000–2002, 2007) |
| Kawasaki Mule 2520 |
1993 and earlier (1993–2000, 2007) |
| Kawasaki Mule 3000 |
2001 and earlier (2001–2007) |
| Kawasaki Mule 3010 4x4 |
2001 and earlier (2001–2007) |
| Kawasaki Mule 3010 Diesel |
2002 and earlier (2002, 2007) |
Why Choose a Genuine Kawasaki OEM Spring Pin?
- Exact gear, spline and bearing fit
- Restores smooth, positive shifting and range selection
- Designed for full engine torque and load
- Lowers the risk of repeat failures
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Kawasaki model we support
Features and Materials
Key Features
- Genuine Kawasaki OEM drivetrain part, part #555A0528
- Machined to Kawasaki's original specifications
- Hardened surfaces where applicable
- Matches factory seals, bearings and mounting
- Designed for the listed Kawasaki models
Materials and Construction
Kawasaki drivetrain parts use heat-treated alloy steel for gears, shafts, forks and splines, sealed bearings, and aluminum or cast housings, with oil- and weather-resistant seals and boots.
Common Reasons Owners Replace This Part
- Fixing grinding, popping out of gear or hard shifting
- Rebuilding transmissions and front or rear gearcases
- Fixing 4WD or differential-lock engagement problems
- Repairing leaks and vibration from drive shafts and U-joints
Signs Your Spring Pin Needs Replacing
- Grinding, clunking or whining
- Popping out of gear or trouble selecting range
- Vibration that grows with speed
- Oil leaks at seals, covers or gearcases
- 4WD or diff lock that will not engage or release
Installation Tips
- Drain transmission or gearcase oil before disassembly.
- Follow the Kawasaki service manual for shimming, preload and torque specs.
- Replace seals, O-rings and gaskets you disturb.
- Lubricate gears and bearings with the specified oil during assembly.
- Refill with the correct oil and amount, then test-ride and check for leaks.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Related OEM Parts for the Same Machines
Doing the job right? These genuine Kawasaki parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Spring Pin with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Kawasaki Spring Pin?
The genuine Kawasaki part number is 555A0528. Use it to match this part to your factory parts diagram.
Which Kawasaki models does part #555A0528 fit?
It fits 11 Kawasaki Mule models from 1990 to 2007. The complete list is in the fitment tables above.
Is this a genuine Kawasaki part?
Yes. This is a genuine Kawasaki OEM part, the same part number used at the factory, not an aftermarket copy.
What oil should I use?
Use the transmission and gearcase oils in your Kawasaki owner's manual. The wrong oil can cause wear and engagement problems.
Should I replace bearings and seals during a rebuild?
Yes. They are inexpensive compared to labor.
Can a bad drivetrain part damage other components?
Yes. Worn parts shed metal into the oil and damage gears and bearings. Repair problems early.
Order Your Genuine Kawasaki Spring Pin Today
Get your Mule models back to factory condition. Add the genuine Kawasaki Spring Pin (part #555A0528) to your cart today, and order the related parts above at the same time so you can finish the job in one go.
Where to Ride Your Kawasaki
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.