Genuine Kawasaki Spring Seat — OEM Part #16007-1203
Get smooth engagement and steady acceleration back with a genuine Kawasaki Spring Seat. Built for the Kawasaki ATV or side-by-side, it matches the original CVT specification, so belt alignment, shift points and cooling airflow stay where they should.
The drive and driven pulleys, belt, covers and cooling ducts work as one system. Worn or mismatched parts cause belt slip, harsh engagement, overheating and early belt failure. This part is confirmed for 19 Kawasaki models from 2007 to 2025. See the full fitment list below.
Spring Seat at a Glance
-
OEM part number: 16007-1203
-
Brand: Kawasaki (genuine factory part)
-
Part type: CVT/Clutch Components
-
Fits: Brute Force ATV, KFX sport and youth ATV and Prairie utility ATV models, 2007–2025
-
Condition: New
Kawasaki Models and Years This Spring Seat Fits
Genuine Kawasaki part #16007-1203 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Kawasaki Brute Force ATV Fitment
| Model |
Model Years |
| Kawasaki Brute Force 650 4x4 |
2007–2013 |
| Kawasaki Brute Force 650 4x4 Hardwoods Green HD |
2007–2009 |
| Kawasaki Brute Force 650 4x4i |
2007–2013 |
| Kawasaki Brute Force 650 4x4i Hardwoods Green HD |
2007–2010 |
| Kawasaki Brute Force 750 |
2024–2025 |
| Kawasaki Brute Force 750 4x4i |
2007–2021 |
| Kawasaki Brute Force 750 4x4i EPS |
2012–2023 |
| Kawasaki Brute Force 750 4x4i EPS Camo |
2015–2023 |
| Kawasaki Brute Force 750 4x4i Hardwoods Green HD |
2008–2009 |
| Kawasaki Brute Force 750 4x4i NRA Outdoors |
2008–2009 |
| Kawasaki Brute Force 750 4x4i Realtree APG HD |
2010 |
| Kawasaki Brute Force 750 EPS |
2024–2025 |
| Kawasaki Brute Force 750 LE EPS |
2024–2025 |
| Kawasaki Brute Force 750 LE EPS Camo |
2024–2025 |
Kawasaki KFX sport and youth ATV Fitment
| Model |
Model Years |
| Kawasaki KFX 700 |
2007–2009 |
Kawasaki Prairie utility ATV Fitment
| Model |
Model Years |
| Kawasaki Prairie 360 |
2007–2009 |
| Kawasaki Prairie 360 4x4 |
2007–2013 |
| Kawasaki Prairie 360 4x4 Hardwoods Green HD |
2007–2009 |
| Kawasaki Prairie 360 4x4 Realtree APG HD |
2010–2011 |
Why Choose a Genuine Kawasaki OEM Spring Seat?
- Factory calibration for engagement and shift-out
- Correct belt alignment and deflection
- Keeps CVT cooling and sealing at factory standard
- Helps your drive belt last longer
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Kawasaki model we support
Features and Materials
Key Features
- Genuine Kawasaki OEM CVT or clutch part, part #16007-1203
- Built to Kawasaki's original clutch specifications
- Precision-machined surfaces where applicable
- Designed for the listed Kawasaki drivetrains
- Works with OEM belts, covers, seals and ducts
Materials and Construction
Kawasaki CVT and clutch parts use precision-machined aluminum sheaves and housings, hardened steel shafts, weights and rollers, wear-resistant bushings and friction materials, and heat-stable covers and ducts sealed against water and dust.
Common Reasons Owners Replace This Part
- Fixing belt slip, jerky engagement or poor top speed
- Replacing worn sheaves, weights, springs or bushings
- Repairing covers, seals and ducts after water intrusion
- Routine CVT service and belt replacement
Signs Your Spring Seat Needs Replacing
- Belt slipping, squealing or a burning smell
- Jerky, harsh or delayed engagement
- Loss of top speed or pulling power
- Glazed belt or frequent belt failures
- Water or debris inside the CVT cover
Installation Tips
- Remove the CVT cover and clean out belt dust before taking anything apart.
- Use the correct Kawasaki clutch tools; pulleys are under spring tension.
- Inspect sheave faces, weights, bushings and the belt while you are in there.
- Assemble to factory torque specs and check belt deflection and alignment.
- Replace cover seals and follow the belt break-in procedure.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Kawasaki Parts Diagrams for Your Machine
Find part #16007-1203 and every part installed with it in the factory Kawasaki parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Kawasaki parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Spring Seat with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Kawasaki Spring Seat?
The genuine Kawasaki part number is 16007-1203. Use it to match this part to your factory parts diagram.
Which Kawasaki models does part #16007-1203 fit?
It fits 19 Kawasaki Brute Force, KFX and Prairie models from 2007 to 2025. The complete list is in the fitment tables above.
Is this a genuine Kawasaki part?
Yes. This is a genuine Kawasaki OEM part, the same part number used at the factory, not an aftermarket copy.
Should I replace the belt at the same time?
If the belt is glazed, cracked or worn to minimum width, replace it with the clutch parts.
What causes CVT belts to burn up?
Riding in high range at low speed, heavy loads, water in the CVT and worn clutch parts. Use low range for slow, heavy work.
Do I need special tools?
Yes. Most Kawasaki CVT pulleys need specific holding and puller tools to service safely.
Order Your Genuine Kawasaki Spring Seat Today
Work and ride with confidence on parts built for your machine. Order the genuine Kawasaki Spring Seat, OEM part #16007-1203, from Witchdoctors today and keep your Kawasaki ATV or side-by-side running the way Kawasaki designed it.
Where to Ride Your Kawasaki
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.