Victory Valve Spring 7044322

Genuine Victory License Plate Spacer — OEM Part #5812520

Keep everything aligned with the genuine Victory Victory License Plate Spacer, Polaris part #5812520. It is the factory frame or mounting part for the Victory Kingpin.

Frames, cradles, struts and brackets hold the engine and bodywork in place. Exact geometry keeps everything aligned and vibration-free. This part is confirmed for 1 Victory model from 2004 to 2011. See the full fitment list below.

Victory License Plate Spacer at a Glance

• OEM part number: 5812520
• Brand: Victory Motorcycles (genuine Polaris OEM part)
• Part type: License Plate Mount
• Fits: Victory Cruiser models, 2004–2011
• Condition: New

Victory Models and Years This License Plate Spacer Fits

Genuine Victory part #5812520 fits the models and years below. To be certain, match the part number to the factory parts diagram for your bike, or decode your VIN with our Victory VIN decoder before ordering.

Victory Cruiser Fitment

Also Used on These Polaris Models

This hardware is also used on 72 Polaris models, including POLARIS INTL 850 FOREST EU (2015); POLARIS INTL 850 SCRAMBLER HO EPS (2013); POLARIS INTL FOREST 1000 EU (2015); POLARIS INTL RANGER 1000 DIESEL EU (2015–2016); POLARIS INTL RANGER 570 EU (2015–2016); POLARIS INTL RANGER 900 XP EU (2015–2016); POLARIS INTL RANGER ETX EU (2015); POLARIS INTL RZR 570 3PC (2020); POLARIS INTL RZR 570 EU MD (2019); POLARIS INTL SCRAMBLER 1000 XP HO EPS (2014); POLARIS INTL SCRAMBLER 850 EU (2015); POLARIS INTL SCRAMBLER XP 1000 EU (2015); POLARIS INTL SCRAMBLER XP 850 HO EPS (2014); POLARIS INTL SPORTSMAN 500 EFI (2006–2007); POLARIS INTL SPORTSMAN 500 HO (2006, 2010); POLARIS INTL SPORTSMAN 570 EFI EPS FOREST (2014–2015); POLARIS INTL SPORTSMAN 570 EFI TOURING EU (2015); POLARIS INTL SPORTSMAN 570 EFI X2 EPS EUROPE (2015); POLARIS INTL SPORTSMAN 570 EPS UTE (2016); POLARIS INTL SPORTSMAN 570 FOREST (2014); POLARIS INTL SPORTSMAN 570 SP EPS (2015–2016); POLARIS INTL SPORTSMAN 800 EFI (2007); POLARIS INTL SPORTSMAN 850 TOURING SP EU (2015); POLARIS INTL SPORTSMAN EPS (2016); POLARIS INTL SPORTSMAN EPS 550 (2010); POLARIS INTL SPORTSMAN FOREST 500 (2013); POLARIS INTL SPORTSMAN FOREST 550 (2013–2014); POLARIS INTL SPORTSMAN FOREST 850 (2013–2014); POLARIS INTL SPORTSMAN TOURING 500 HO (2010–2011); POLARIS INTL SPORTSMAN TOURING 550 EPS (2011, 2013); POLARIS INTL SPORTSMAN TOURING 570 EFI (2014); POLARIS INTL SPORTSMAN TOURING 570 EPS (2016); POLARIS INTL SPORTSMAN TOURING 800 EFI (2008–2009); POLARIS INTL SPORTSMAN TOURING 850 (2014); POLARIS INTL SPORTSMAN TOURING 850 EPS (2011, 2013); POLARIS INTL SPORTSMAN TOURING XP 550 EPS (2012); POLARIS INTL SPORTSMAN TOURING XP 850 EPS (2012); POLARIS INTL SPORTSMAN X2 550 (2011–2014); POLARIS INTL SPORTSMAN XP 550 (2009); POLARIS INTL SPORTSMAN XP 850 EPS (2009–2010); and more.

Why Choose a Genuine Victory OEM License Plate Spacer?

• Exact factory geometry and mounting points
• Holds parts steady against vibration
• Matches the bike's finish
• Bolts on with factory hardware
• Made to the same specifications as the part installed at the factory, not an aftermarket copy
• Sold by Witchdoctors, a Victory OEM parts source with factory part numbers and diagrams for every listing

Victory stopped building motorcycles after the 2017 model year, and many parts are getting harder to find. Genuine OEM parts keep your bike correct, reliable and easier to sell. Read Victory OEM vs aftermarket parts to see the difference.

Features and Materials

Key Features

• Genuine Polaris/Victory OEM part #5812520
• Factory hole spacing and dimensions
• Durable powder-coat, chrome or plated finish
• Direct replacement for the listed models

Materials and Construction

Victory frame parts and brackets are formed or cast steel and aluminum with powder-coat, chrome or plated finishes and rubber isolators where needed.

Common Reasons Riders Replace This Part

• Replacing bent mounts after a tip-over
• Fixing cracked brackets
• Restoring the license plate or light mount
• Rebuilding after a crash

Signs Your License Plate Spacer Needs Replacing

• Bent or cracked bracket
• Parts out of alignment
• Vibration from a loose mount
• Rust on the finish

Installation Tips

1. Support the bike and any parts held by the mount.
2. Remove the old part and keep the hardware.
3. Install the new part loosely and align it.
4. Torque fasteners to spec.
5. Check for clearance and vibration.

Not sure whether to do it yourself? Read when to seek professional help or DIY before you start.

Victory Parts Diagrams for This Part

Find part #5812520 in the factory Victory parts diagrams for your bike. Open the diagrams for your model and year to see exactly where it goes and which parts install with it:

• 2011 Victory Kingpin parts diagrams
• 2010 Victory Kingpin parts diagrams
• 2009 Victory Kingpin parts diagrams
• 2008 Victory Kingpin parts diagrams
• 2007 Victory Kingpin parts diagrams
• 2006 Victory Kingpin parts diagrams
• 2005 Victory Kingpin parts diagrams
• 2004 Victory Kingpin parts diagrams

Related Victory OEM Parts

Doing the job right? These genuine Victory parts fit the same bikes and are often replaced at the same time:

• Victory License Plate Bracket, Intl (#5252865-478)
• Victory License Plate Bracket, Front (#5247446)
• Victory License Plate Bracket, Rear (#5247445)
• Victory License Plate Spacer (#5134403)
• Victory Pad, License Plate Mount (#5812521)
• Victory License Plate Bracket, Rear, Black (#5251340-408)

Recommended Accessories and Maintenance Supplies

Pair your License Plate Spacer with these parts and supplies:

• Hard-to-find Victory parts — Obsolete and discontinued Victory parts
• Victory maintenance essentials — Filters, plugs, fluids and wear items
• Victory engine parts — Gaskets, seals, bearings and internal engine parts
• Custom Dynamics LED lighting — LED turn signals, brake lights and accent lighting
• Victory OEM parts diagrams — find every factory part for your model

Helpful Guides from the Witchdoctors Blog

• Victory Motorcycle OEM Parts VS Aftermarket Parts: Which Is Right for Your Bike?
• Spring Tune-Up for Your Victory or Indian Motorcycle: Get Ready to Ride!
• How to Prepare Your Motorcycle for Winter Storage.
• Can You Ride a Motorcycle in The Rain?

Frequently Asked Questions

What is the OEM part number for this Victory License Plate Spacer?

The genuine Polaris/Victory part number is 5812520. Use it to match this part to your factory parts diagram.

Which Victory models does part #5812520 fit?

It fits the Kingpin (2004–2011).

Is this a genuine Victory part?

Yes. This is a genuine Polaris OEM part for Victory motorcycles, the same part number used at the factory, not an aftermarket copy.

Can I still get parts for my Victory?

Yes. Polaris continues to supply many Victory parts, and Witchdoctors stocks thousands of genuine Victory part numbers. Read where to find Victory parts.

Does this include hardware?

Check the parts diagram for hardware sold separately.

Can a bent bracket be straightened?

Replacement is safer for structural parts.

Is the frame stamped with my VIN?

Replacement frames may need to be registered in your state.

Order Your Genuine Victory License Plate Spacer Today

Ride with confidence on parts made for your bike. Order the genuine Victory License Plate Spacer, OEM part #5812520, from Witchdoctors today and keep your Victory Kingpin running the way Victory designed it.

• How long will it take to receive my order?
• Shipping and return policy
• Questions about fitment? Contact us
• Shop all Victory OEM parts
• Victory motorcycle parts guide

Where to Ride Your Victory

Your Victory was built for the open road. These scenic routes are favorites with motorcycle riders. Check current road conditions, seasonal closures and park fees before you go.

• Pacific Coast Scenic Byway (US 101) — Oregon Coast: 363 miles of Pacific coastline, headlands and lighthouses
• Tail of the Dragon (US 129, Deals Gap) — North Carolina and Tennessee: 318 curves in 11 miles