Genuine Yamaha Steering Knuckle — OEM Part #JU0-F3521-01-00
Steer with confidence again with a genuine Yamaha Steering Knuckle. Built for the Pro Hauler 700, it matches the factory splines, joints and mounting points, so the steering feels tight and works with electric power steering (EPS) where equipped.
The steering wheel or handlebar, column, rack, tie rods and EPS unit all affect control. Play or binding in any one part shows up as vague or heavy steering. This part is confirmed for 2 Yamaha models from 2004 to 2006. See the full fitment list below.
Steering Knuckle at a Glance
-
OEM part number: JU0-F3521-01-00
-
Brand: Yamaha (genuine factory part)
-
Part type: Steering Knuckle
-
Fits: Pro Hauler utility side-by-side models, 2004–2006
-
Condition: New
Yamaha Models and Years This Steering Knuckle Fits
Genuine Yamaha part #JU0-F3521-01-00 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Yamaha Pro Hauler utility side-by-side Fitment
| Model |
Model Years |
| Yamaha Pro Hauler 700 |
2004–2006 |
| Yamaha Pro Hauler 700 2WD |
2006 |
Why Choose a Genuine Yamaha OEM Steering Knuckle?
- Factory fit with the rack, column and linkage
- Restores tight, precise steering
- Works with Yamaha EPS where equipped
- Helps keep alignment and tire wear in check
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Yamaha model we support
Features and Materials
Key Features
- Genuine Yamaha OEM steering part, part #JU0-F3521-01-00
- Original splines, threads and joints
- Corrosion- and impact-resistant construction
- Designed for the listed Yamaha models
- Works with factory EPS units, sensors and wiring where applicable
Materials and Construction
Yamaha steering parts use hardened steel shafts, racks and tie-rod ends with sealed joints, aluminum or steel housings, and sealed EPS motors and modules built for water and vibration.
Common Reasons Riders Replace This Part
- Fixing play, clunks or wandering
- Replacing bent tie rods or shafts after an impact
- Repairing EPS faults or heavy steering
- Restoring steering on a high-hour machine
Signs Your Steering Knuckle Needs Replacing
- Free play in the steering
- Clunking when turning
- Heavy steering or an EPS warning
- Bent tie rods or an off-center wheel or handlebar
- Torn boots on tie-rod ends or the rack
Installation Tips
- Point the wheels straight before disconnecting parts.
- Use the Yamaha parts diagram for hardware, cotter pins and EPS connectors.
- Disconnect the battery before working on EPS parts.
- Match the original spline position or tie-rod length.
- Torque to spec, set toe and check lock-to-lock travel.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Related OEM Parts for the Same Machines
Doing the job right? These genuine Yamaha parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Steering Knuckle with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Yamaha Steering Knuckle?
The genuine Yamaha part number is JU0-F3521-01-00. Use it to match this part to your factory parts diagram.
Which Yamaha models does part #JU0-F3521-01-00 fit?
It fits the Pro Hauler 700 (2004–2006); Pro Hauler 700 2WD (2006).
Is this a genuine Yamaha part?
Yes. This is a genuine Yamaha OEM part, the same part number used at the factory, not an aftermarket copy.
Do I need an alignment after steering work?
Yes. Set toe to prevent wander and tire wear.
Does EPS need a reset after service?
Some systems need a reset or calibration. Check your service manual or ask a dealer.
Can a bent steering part be straightened?
No. Always replace bent steering parts.
Order Your Genuine Yamaha Steering Knuckle Today
Ride with confidence on parts built for your machine. Order the genuine Yamaha Steering Knuckle, OEM part #JU0-F3521-01-00, from Witchdoctors today and keep your Pro Hauler 700 running the way Yamaha designed it.
Where to Ride Your Yamaha
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.