Genuine Polaris Surge Tank — OEM Part #5439202
Keep your Polaris ATV or side-by-side running cool under load with a genuine Polaris Surge Tank. It connects to the original hoses, mounts and wiring, so you get the factory cooling performance engineered for hot days, slow crawling and heavy work.
The radiator, water pump, fan, thermostat, hoses and reservoir work together to hold engine temperature steady. If one part fails, the whole system suffers. This part is confirmed for 283 Polaris models from 2013 to 2026. See the full fitment list below.
Surge Tank at a Glance
-
OEM part number: 5439202
-
Brand: Polaris (genuine factory part)
-
Part type: Coolant Tanks & Components
-
Fits: General crossover side-by-side, RZR sport side-by-side and Ranger utility side-by-side models, 2013–2026
-
Condition: New
Polaris Models and Years This Surge Tank Fits
Genuine Polaris part #5439202 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
This part is shared across 283 Polaris model variants, so the table below groups them by model family. Your exact trim is listed in the parts diagrams linked further down.
Polaris General crossover side-by-side Fitment
| Model Family |
Model Years |
Trims |
| Polaris General 1000 |
2016–2026 |
22 |
| Polaris General XP |
2020–2026 |
27 |
Polaris RZR sport side-by-side Fitment
| Model Family |
Model Years |
Trims |
| Polaris RZR 64 |
2021 |
1 |
| Polaris RZR 900 |
2018–2026 |
10 |
| Polaris RZR 1000 |
2018–2021 |
4 |
| Polaris RZR S |
2020 |
1 |
| Polaris RZR S4 |
2020 |
1 |
| Polaris RZR Trail |
2020–2026 |
7 |
| Polaris RZR XP |
2018–2023 |
17 |
| Polaris RZR Xp4 |
2019 |
1 |
Polaris Ranger utility side-by-side Fitment
| Model Family |
Model Years |
Trims |
| Polaris Ranger |
2019–2020, 2023 |
3 |
| Polaris Ranger 6P |
2017 |
1 |
| Polaris Ranger 500 |
2026 |
1 |
| Polaris Ranger 530 |
2023–2025 |
1 |
| Polaris Ranger 570 |
2015–2016, 2022–2026 |
24 |
| Polaris Ranger 900 |
2013–2019 |
6 |
| Polaris Ranger 902D |
2020–2022 |
3 |
| Polaris Ranger 1000 |
2015–2026 |
58 |
| Polaris Ranger Back |
2020 |
2 |
| Polaris Ranger Diesel |
2014, 2022–2026 |
8 |
| Polaris Ranger FC |
2020 |
2 |
| Polaris Ranger HD |
2020 |
1 |
| Polaris Ranger High |
2019–2020 |
2 |
| Polaris Ranger Hst |
2015–2017 |
1 |
| Polaris Ranger Is |
2020 |
1 |
| Polaris Ranger MD |
2018, 2024–2025 |
2 |
| Polaris Ranger MS |
2025–2026 |
2 |
| Polaris Ranger Northstar |
2018–2020 |
12 |
| Polaris Ranger RC |
2020 |
2 |
| Polaris Ranger SP |
2026 |
1 |
| Polaris Ranger Texas |
2020 |
1 |
| Polaris Ranger Tx |
2020 |
1 |
| Polaris Ranger Winter |
2020 |
2 |
| Polaris Ranger XP |
2014, 2017–2019, 2021–2026 |
55 |
Why Choose a Genuine Polaris OEM Surge Tank?
- Factory flow and capacity for your engine
- Direct-fit connections with no adapters
- Heat- and pressure-resistant construction
- Helps prevent overheating and head gasket failure
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Polaris model we support
Features and Materials
Key Features
- Genuine Polaris OEM cooling part, part #5439202
- Original hose sizes, mounts and connectors
- Built for the pressure and temperature of the listed engines
- Designed for mud, dust and debris
- Works with factory-approved coolant
Materials and Construction
Polaris cooling parts use aluminum radiator cores, reinforced rubber hoses rated for hot coolant under pressure, glass-reinforced plastic housings and steel or stainless clamps.
Common Reasons Riders Replace This Part
- Fixing coolant leaks and overheating
- Replacing parts damaged by mud packing or debris
- Preventive replacement of aging hoses and seals
- Restoring cooling after an engine rebuild
Signs Your Surge Tank Needs Replacing
- Temperature warning or rising gauge
- Coolant leaks or a sweet smell after riding
- A fan that does not run or makes noise
- Cracked, swollen or soft hoses
- Coolant bubbling or boiling over in the reservoir
Installation Tips
- Let the engine cool completely before opening the system.
- Drain coolant into a container and dispose of it properly.
- Install the new part with fresh clamps, gaskets and O-rings where specified.
- Refill with the coolant in your Polaris manual and bleed air from the system.
- Run to operating temperature, check for leaks and top up the reservoir.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Polaris Parts Diagrams for Your Machine
Find part #5439202 and every part installed with it in the factory Polaris parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Polaris parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Surge Tank with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Polaris Surge Tank?
The genuine Polaris part number is 5439202. Use it to match this part to your factory parts diagram.
Which Polaris models does part #5439202 fit?
It fits 283 Polaris General, RZR and Ranger models from 2013 to 2026. The complete list is in the fitment tables above.
Is this a genuine Polaris part?
Yes. This is a genuine Polaris OEM part, the same part number used at the factory, not an aftermarket copy.
What coolant should I use?
Use the coolant type and mix in your Polaris owner's manual. Mixing coolant types can cause gelling or corrosion.
Do I need to bleed the cooling system?
Yes. Trapped air causes hot spots and overheating. Follow the procedure for your model.
Why does my machine overheat in mud?
Mud packed in the radiator fins blocks airflow. Clean the radiator regularly from the back side with low-pressure water.
Order Your Genuine Polaris Surge Tank Today
Ride with confidence on parts built for your machine. Order the genuine Polaris Surge Tank, OEM part #5439202, from Witchdoctors today and keep your Polaris ATV or side-by-side running the way Polaris designed it.
Where to Ride Your Polaris
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.